EN 10025-2 Grade S355K2 normalized or normalized formed (+N)
  • Home
  • Material
  • EN 10025-2 Grade S355K2 normalized or normalized formed (+N)

EN 10025-2 Grade S355K2 normalized or normalized formed (+N)

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) introduction

The hot rolled, unalloyed quality steel S355K2 is a fine grained steel for dynamic loaded welding constructions. Dimensioning advantages in respect to the S235J2 due to the by 120 MPa higher yield strength. The steel shows a by 15% higher resistance to mineral wear due to sliding action in comparison to S235J2.
The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery.
For long products and continuous rolled flats the delivery condition is up to the producer +AR, +N or +M. The delivery condition of four-high rolled sheet is also up to the producer and may be +AR or +N. Both conditions can be ordered.
For this steel are available (mat. no 1.0594, S355K2C) grades for folding, roll forming to shape and cold drawing.

Equivalent material: IS E350, ASTM A678 Grade B, UNS K02002, DIN S355K2, EN S355K2G4, DIN 1.0596, EN 1.0596, DIN S355K2G4, AFNOR S355K2, AFNOR E36-4, BS S355K2, BS EN50DD

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) general

Property Temperature Value Condition Related Standards Shape
Density 20 °C Density of 7.83 g/cm³ normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) thermal

Property Temperature Value Condition Related Standards Shape Comment
Coefficient of thermal expansion -100 °C Coefficient of thermal expansion of 1.08e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Coefficient of thermal expansion of 1.19e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Coefficient of thermal expansion of 1.25e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 200 °C Coefficient of thermal expansion of 1.3e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 300 °C Coefficient of thermal expansion of 1.36e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 400 °C Coefficient of thermal expansion of 1.41e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 500 °C Coefficient of thermal expansion of 1.45e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 600 °C Coefficient of thermal expansion of 1.49e-05 1/K normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
Max service temperature - Max service temperature of 305.4 °C - - - Predicted Value, Long
- - Max service temperature of 500 °C - - - Typical for Carbon Steel
Melting point - Melting point of 1480 - 1526 °C - - - Typical for Low Carbon Steel
Specific heat capacity -100 °C Specific heat capacity of 423 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Specific heat capacity of 461 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Specific heat capacity of 479 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 200 °C Specific heat capacity of 499 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 300 °C Specific heat capacity of 517 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 400 °C Specific heat capacity of 536 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 500 °C Specific heat capacity of 558 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 600 °C Specific heat capacity of 587 J/(kg·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
Thermal conductivity -100 °C Thermal conductivity of 37.6 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Thermal conductivity of 42.2 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Thermal conductivity of 43.2 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 200 °C Thermal conductivity of 42.9 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 300 °C Thermal conductivity of 41.2 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 400 °C Thermal conductivity of 39.1 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 500 °C Thermal conductivity of 36.6 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 600 °C Thermal conductivity of 34.1 W/(m·K) normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
Thermal diffusivity -100 °C Thermal diffusivity of 12.9 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Thermal diffusivity of 11.7 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Thermal diffusivity of 11.2 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 200 °C Thermal diffusivity of 10.3 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 300 °C Thermal diffusivity of 9.4 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 400 °C Thermal diffusivity of 8.3 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 500 °C Thermal diffusivity of 7.1 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 600 °C Thermal diffusivity of 5.7 mm²/s normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) chemical

Property Value Condition Related Standards Shape
Carbon Carbon of 0.2 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire
Copper Copper of 0.55 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire
Manganese Manganese of 1.6 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire
Phosphorus Phosphorus of 0.025 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire
Silicon Silicon of 0.55 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire
Sulfur Sulfur of 0.025 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) magnetic

Property Value Comment
Curie temperature Curie temperature of 770 °C Typical for Low Carbon Steel

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) electrical

Property Temperature Value Condition Related Standards Shape Comment
Electrical conductivity - Electrical conductivity of 7 S/m - - - Predicted Value
Electrical resistivity -100 °C Electrical resistivity of 1.82e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Electrical resistivity of 2.47e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Electrical resistivity of 2.96e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 200 °C Electrical resistivity of 3.68e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 300 °C Electrical resistivity of 4.55e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 400 °C Electrical resistivity of 5.56e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 500 °C Electrical resistivity of 6.75e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 600 °C Electrical resistivity of 8.13e-07 Ω·m normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -

EN 10025-2 Grade S355K2 normalized or normalized formed (+N) mechanical

Property Temperature Value Condition Related Standards Shape Comment
Elastic modulus -100 °C Elastic modulus of 217 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elastic modulus of 212 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Elastic modulus of 207 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 200 °C Elastic modulus of 199 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 300 °C Elastic modulus of 192 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 400 °C Elastic modulus of 184 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 500 °C Elastic modulus of 175 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 600 °C Elastic modulus of 164 GPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
Elongation - Elongation of 17.7 % - - - Predicted Value, A200
- - Elongation of 19.6 % - - - Predicted Value, A50
- - Elongation of 22.3 % - - - Predicted Value, A5
- 20 °C Elongation of 12 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80 Transverse
- 20 °C Elongation of 13 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80 Transverse
- 20 °C Elongation of 14 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80 Transverse
- 20 °C Elongation of 14 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80
- 20 °C Elongation of 15 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80 Transverse
- 20 °C Elongation of 15 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80
- 20 °C Elongation of 16 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80 Transverse
- 20 °C Elongation of 16 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80
- 20 °C Elongation of 17 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80
- 20 °C Elongation of 17 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Elongation of 17 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire A80
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 19 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Elongation of 20 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Elongation of 20 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 21 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 22 % normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
Hardness, Brinell - Hardness, Brinell of 243 [-] - - - Predicted Value, Transverse
Poisson's ratio - Poisson's ratio of 0.29 [-] - - - Typical for Low Carbon Steel
Reduction of area - Reduction of area of 44.0 % - - - Predicted Value, Transverse
- - Reduction of area of 52.7 % - - - Predicted Value
Shear modulus - Shear modulus of 82 GPa - - - Typical for Low Carbon Steel
Shear strength - Shear strength of 513.8 MPa - - - Predicted Value
Tensile strength 20 °C Tensile strength of 450 - 680 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 450 - 630 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 450 - 600 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 680 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 630 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 600 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 510 - 680 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 510 - 630 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 510 - 600 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
Yield strength - Yield strength of 243.9 MPa - - - Predicted Value, RP1
- - Yield strength of 308.5 MPa - - - Predicted Value, RP1 Transverse
- - Yield strength of 367.7 MPa - - - Predicted Value, Transverse
- - Yield strength of 379.8 MPa - - - Predicted Value, RP05
- - Yield strength of 420.8 MPa - - - Predicted Value, RP02
- - Yield strength of 477.7 MPa - - - Predicted Value, RP02 Transverse
- - Yield strength of 480.2 MPa - - - Predicted Value, RP002
- 20 °C Yield strength of 265 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 275 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 285 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 295 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 315 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 325 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 335 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 345 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 355 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 Strip, Sheet, Flat, Rod, Wire -
- 100 °C Yield strength of 194 - 254 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 194 - 249 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 194 - 234 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 194 - 224 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 194 - 214 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 194 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 214 - 254 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 214 - 249 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 214 - 234 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 214 - 224 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 214 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 224 - 254 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 224 - 249 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 224 - 234 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 224 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 234 - 254 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 234 - 249 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 234 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 249 - 254 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 249 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 100 °C Yield strength of 254 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 166 - 226 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 166 - 221 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 166 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 166 - 196 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 166 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 186 - 226 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 186 - 221 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 186 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 186 - 196 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 196 - 226 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 196 - 221 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 196 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 196 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 206 - 226 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 206 - 221 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 221 - 226 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 221 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 200 °C Yield strength of 226 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 146 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 146 - 202 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 146 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 146 - 176 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 146 - 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 146 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 166 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 166 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 166 - 202 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 166 - 176 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 176 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 176 - 202 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 176 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 176 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 186 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 186 - 202 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 202 - 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 202 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 250 °C Yield strength of 206 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 126 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 126 - 181 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 126 - 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 126 - 156 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 126 - 146 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 126 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 146 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 146 - 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 146 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 146 - 181 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 146 - 156 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 156 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 156 - 181 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 156 - 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 156 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 166 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 166 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 166 - 181 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 181 - 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 181 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -
- 300 °C Yield strength of 186 MPa normalized or normalized formed (+N) EN 10025-2, EN 10025 - -

Our commitment to craftsmanship ensures excellence in every steel product we deliver.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories