EN 10327 Grade DX56D hot dip aluminium-zinc or aluminium-silicon coated (+AZ, +AS)
Equivalent material: GB DX56D, IS GPED, JIS SGCD2, DIN 1.0322, DIN DX56D, AFNOR DX56D, BS DX56D, EN 1.0322, ISO HR2, GOST 06, GB/T DX56D
EN 10327 Grade DX56D hot dip aluminium-zinc or aluminium-silicon coated (+AZ, +AS) general
| Property |
Temperature |
Value |
Comment |
| Density |
20.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
EN 10327 Grade DX56D hot dip aluminium-zinc or aluminium-silicon coated (+AZ, +AS) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
20.0 °C |
Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K |
Typical for Low Carbon Steel |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
EN 10327 Grade DX56D hot dip aluminium-zinc or aluminium-silicon coated (+AZ, +AS) chemical
| Property |
Value |
| Carbon |
Carbon of 0.12 % |
| Manganese |
Manganese of 0.6 % |
| Phosphorus |
Phosphorus of 0.1 % |
| Silicon |
Silicon of 0.5 % |
| Sulfur |
Sulfur of 0.045 % |
| Titanium |
Titanium of 0.3 % |
EN 10327 Grade DX56D hot dip aluminium-zinc or aluminium-silicon coated (+AZ, +AS) electrical
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
EN 10327 Grade DX56D hot dip aluminium-zinc or aluminium-silicon coated (+AZ, +AS) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 - 215 GPa |
Typical for Low Carbon Steel |
| Elongation A80, transverse |
20.0 °C |
Elongation A80, transverse of 32 - 39 % |
- |
| Poisson's ratio |
20.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
We're committed to delivering superior quality and raising the bar in the steel industry.
-- Our promise
Similar or equivalent steel materials
Get a quote