EN 10152 Grade DC03 skin passed
EN 10152 Grade DC03 skin passed introduction
The cold rolled, electrolytically zinc coated (+ZE) steel DC03 (deep drawing quality) is suitable for cold forming of complex profile forms, construction components and molded parts.
Weldability is given when using the normal processes.
Application:
metal furniture, shaft processing, radiators and ventilators, the manufacturing of tubes and small profiles and in the automotive industry for complex body outer and inner parts, wings, side frames, bottom plates, spare wheel wells and door outside and inner panels
Equivalent material: IS CR2, IS SECE, ASTM A1008DSTypeA, ASTM A1008DSTypeB, ASTM DSTypeA, ASTM DSTypeB, DIN RRSt3, DIN RRSt13, DIN St13, DIN St13O3, DIN St13-03, AFNOR E, BS CR2, IS SECD, SS 14-11-48, ASTM CSTypeA.BorC, DIN RRSt13ZE, AS CA2, IS DD, IS SPCD, DIN 1.0336, EN FeP03, EN 1.0336, DIN USt 4, DIN USt 14, UNI FeP02, UNE AP02, AISI 1008, BS CR3, SAE 1008, JIS SPCD, GOST 08kp, GOST 08ps, ASTM 1008, DIN 1.0347, EN DC03+Z, EN 1.0347, DIN RRSt 3, DIN RRSt 13, DIN St 13, DIN St 13 O3, DIN St 13 03, DIN DC03, AFNOR XE, AFNOR DC03, UNI FeP03, BS DC03, BS CS1, BS CS3, JIS SECE, JIS CR2, ISO CR2, GOST 08Ju, GB/T LT 03, GB/T U43074
EN 10152 Grade DC03 skin passed general
| Property |
Value |
Comment |
| Density |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
EN 10152 Grade DC03 skin passed thermal
| Property |
Value |
Comment |
| Coefficient of thermal expansion |
Coefficient of thermal expansion of 1.32e-05 - 1.38e-05 1/K |
Typical for Low Carbon Steel |
| Max service temperature |
Max service temperature of 376 °C |
Predicted Value, Long |
| - |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
Specific heat capacity of 465 J/(kg·K) |
Typical for Low Carbon Steel |
| Thermal conductivity |
Thermal conductivity of 25 - 93 W/(m·K) |
Typical for Low Carbon Steel |
EN 10152 Grade DC03 skin passed chemical
| Property |
Value |
Condition |
Related Standards |
Shape |
| Carbon |
Carbon of 0.1 % |
skin passed |
EN 10152 |
Strip, Sheet |
| Manganese |
Manganese of 0.45 % |
skin passed |
EN 10152 |
Strip, Sheet |
| Phosphorus |
Phosphorus of 0.035 % |
skin passed |
EN 10152 |
Strip, Sheet |
| Sulfur |
Sulfur of 0.035 % |
skin passed |
EN 10152 |
Strip, Sheet |
EN 10152 Grade DC03 skin passed magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
EN 10152 Grade DC03 skin passed electrical
| Property |
Value |
Comment |
| Electrical conductivity |
Electrical conductivity of 8 S/m |
Predicted Value |
| Electrical resistivity |
Electrical resistivity of 1.43e-07 - 1.74e-07 Ω·m |
Typical for Carbon Steel |
EN 10152 Grade DC03 skin passed mechanical
| Property |
Temperature |
Value |
Condition |
Related Standards |
Shape |
Comment |
| Elastic modulus |
- |
Elastic modulus of 200 - 215 GPa |
- |
- |
- |
Typical for Low Carbon Steel |
| Elongation |
- |
Elongation of 14.4 % |
- |
- |
- |
Predicted Value, A200 |
| - |
- |
Elongation of 19.7 % |
- |
- |
- |
Predicted Value, A5 |
| - |
- |
Elongation of 20.8 % |
- |
- |
- |
Predicted Value, A50 |
| - |
- |
Elongation of 21.4 % |
- |
- |
- |
Predicted Value, Transverse |
| - |
- |
Elongation of 22.0 % |
- |
- |
- |
Predicted Value |
| - |
20 °C |
Elongation of 30 % |
skin passed |
EN 10152 |
Strip |
A80 Transverse |
| - |
20 °C |
Elongation of 32 % |
skin passed |
EN 10152 |
Strip |
A80 Transverse |
| - |
20 °C |
Elongation of 34 % |
skin passed |
EN 10152 |
Strip |
A80 Transverse |
| - |
20 °C |
Elongation of 34 % |
skin passed |
EN 10152 |
Strip, Sheet |
A80 |
| Hardness, Brinell |
- |
Hardness, Brinell of 266 [-] |
- |
- |
- |
Predicted Value, Transverse |
| Poisson's ratio |
- |
Poisson's ratio of 0.29 [-] |
- |
- |
- |
Typical for Low Carbon Steel |
| Reduction of area |
- |
Reduction of area of 42.0 % |
- |
- |
- |
Predicted Value |
| - |
- |
Reduction of area of 43.7 % |
- |
- |
- |
Predicted Value, Transverse |
| Shear modulus |
- |
Shear modulus of 82 GPa |
- |
- |
- |
Typical for Low Carbon Steel |
| Shear strength |
- |
Shear strength of 558.3 MPa |
- |
- |
- |
Predicted Value |
| Tensile strength |
20 °C |
Tensile strength of 270 - 370 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Tensile strength of 270 - 370 MPa |
skin passed |
EN 10152 |
Strip, Sheet |
- |
| Yield strength |
- |
Yield strength of 279.4 MPa |
- |
- |
- |
Predicted Value, RP05 |
| - |
- |
Yield strength of 285.7 MPa |
- |
- |
- |
Predicted Value, RP1 Transverse |
| - |
- |
Yield strength of 293.5 MPa |
- |
- |
- |
Predicted Value, RP1 |
| - |
- |
Yield strength of 367.8 MPa |
- |
- |
- |
Predicted Value, RP02 Transverse |
| - |
- |
Yield strength of 544.4 MPa |
- |
- |
- |
Predicted Value, RP02 |
| - |
- |
Yield strength of 627.3 MPa |
- |
- |
- |
Predicted Value, RP002 |
| - |
20 °C |
Yield strength of 140 - 280 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Yield strength of 140 - 260 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Yield strength of 140 - 240 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Yield strength of 140 - 240 MPa |
skin passed |
EN 10152 |
Strip, Sheet |
- |
Stay ahead of the curve with our advanced steel technologies that push boundaries and unlock new possibilities.
-- Our promise
Similar or equivalent steel materials
Get a quote