EN 10139 Grade St2 cold rolled, skin passed
EN 10139 Grade St2 cold rolled, skin passed introduction
The soft non-alloy steel St 2, St 12 acc. to DIN 1623/1, is suitable for cold forming. The steel is offered in different conditions (from K to K70) with different strength and cupping values.
The steel is applicated in the plant and tool engineering.
No stretcher lines in the conditions K40 to 70.
The steel is weldable, in the conditions K32 to K70 the strength can be decreased post welding.
Equivalent material: CSN 11331, AFNOR C, BS CR4, GOST 08ps5-N, UNI FePO1, JIS SPCC, ÖNORM StO2F, PN T, SS SIS1142, ASTM A366, DIN 1.0330, DIN St 12, DIN DC01, AFNOR DC01, BS DC01, AISI 1008, SAE 1008, JIS SECD, EN DC01, EN 1.0330, ISO CR1, ISO HR1, ISO 02, GOST 08kp-3, GB/T LT 02, GB/T U43084, UNS G10080
EN 10139 Grade St2 cold rolled, skin passed general
| Property |
Temperature |
Value |
Comment |
| Density |
20.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
EN 10139 Grade St2 cold rolled, skin passed thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
20.0 °C |
Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K |
Typical for Low Carbon Steel |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
EN 10139 Grade St2 cold rolled, skin passed chemical
| Property |
Value |
| Carbon |
Carbon of 0.1 % |
| Nitrogen |
Nitrogen of 7E-3 % |
EN 10139 Grade St2 cold rolled, skin passed electrical
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
EN 10139 Grade St2 cold rolled, skin passed mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 - 215 GPa |
Typical for Low Carbon Steel |
| Elongation |
20.0 °C |
Elongation of 32 % |
- |
| Elongation A80 |
20.0 °C |
Elongation A80 of 28 % |
- |
| Poisson's ratio |
20.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 270 - 410 MPa |
- |
| Yield strength |
20.0 °C |
Yield strength of 280 MPa |
- |
Fuel industrial growth and development with our high-quality steel solutions.
-- Our promise
Similar or equivalent steel materials
Get a quote