EN 10139 Grade DC01 cold rolled, annealed

EN 10139 Grade DC01 cold rolled, annealed introduction

The non-alloy steel DC01 acc. to DIN EN 10130 is suitable for cold forming of simple profile forms and components. Mechanical foldings are possible for thicknesses of up to 1,5 mm. To freedom of stretcher strains applies a period of 3 months after provision of the products for surface type B.
Welding:
DC01 is weldable by the following welding methods: MAG (metal-active-gas), plasma welding, laser welding, compression weld welding, resistance welding (spot, roll weld, buckle welding), arc welding.
The steel acts as substrate for surface refined and coated bands and sheets.
Application of DC01: household appliances industry, construction trade, car manufacturing, traffic system.
Acc. to DIN EN 10139 DC01 is offered as cold rolled band or bar, cut in strength range HK270 to HK690. On welding of DC01in condition HK290 to HK690 has to be considered the potential influence to the mechanical properties

Equivalent material: AS CA1, IS D, JIS SPCC, ASTM CSTypeA, DIN 1.0330, DIN St 12, DIN St 2, DIN DC01, AFNOR DC01, BS DC01, AISI 1008, SAE 1008, JIS SECD, EN 1.0330, ISO CR1, ISO HR1, ISO 02, GOST 08kp-3, GB/T LT 02, GB/T U43084, ASTM A366, UNS G10080

EN 10139 Grade DC01 cold rolled, annealed general

Property Temperature Value Comment
Density 20.0 °C Density of 7.8 - 7.9 g/cm³ Typical for Low Carbon Steel

EN 10139 Grade DC01 cold rolled, annealed thermal

Property Temperature Value Comment
Coefficient of thermal expansion 20.0 °C Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K Typical for Low Carbon Steel
Melting point - Melting point of 1480 - 1526 °C Typical for Low Carbon Steel

EN 10139 Grade DC01 cold rolled, annealed chemical

Property Value
Carbon Carbon of 0.12 %
Manganese Manganese of 0.6 %
Phosphorus Phosphorus of 0.05 %
Sulfur Sulfur of 0.045 %

EN 10139 Grade DC01 cold rolled, annealed electrical

Property Value Comment
Curie temperature Curie temperature of 770 °C Typical for Low Carbon Steel

EN 10139 Grade DC01 cold rolled, annealed mechanical

Property Temperature Value Comment
Elastic modulus 20.0 °C Elastic modulus of 200 - 215 GPa Typical for Low Carbon Steel
Elongation 20.0 °C Elongation of 32 % -
Elongation A50 20.0 °C Elongation A50 of 30 % -
Elongation A80 20.0 °C Elongation A80 of 28 % -
Hardness, Vickers 20.0 °C Hardness, Vickers of 105 [-] -
Poisson's ratio 20.0 °C Poisson's ratio of 0.29 [-] Typical for Low Carbon Steel
Tensile strength 20.0 °C Tensile strength of 270 - 390 MPa -
Yield strength 20.0 °C Yield strength of 140 MPa -

Conquer challenging environments with confidence using our durable steel products, engineered to withstand extreme conditions.

-- Our promise

Similar or equivalent steel materials

Get a quote