DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q)
DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q) introduction
The steel X 5 CrNiMo 17 12 2 is very well suited for cold-forming, one must be aware of the increased cold strain hardening compared to carbon steels. Its increased resistance to non-oxidizing acids and substances containing halogen and its abilitity to be high-gloss polished allow it to be used for stainless steel screws, nuts and molded parts in the chemical pharmaceutical industries, and in the cellulose, rubber, paint, textile and artificial silk industries and in petrochemistry. Temperature of use: up to 300 degrees C.
Equivalent material: CSN 17346, AFNOR Z6CND17-11, BS 316S31, GOST 03Ch17N14M3, ISO D29, UNI X5CrNiMo17-12, JIS SUS316, PN 00H17N14M2, SS 2347, UNE F.3534-X6CrNiMo17-12-03, ASTM 316, DIN 1.4401, DIN 316S42, DIN 316S33, DIN X 5 CrNiMo 18 10, AFNOR Z7CND17-11-02, BS 316S16, UNI X5CrNiMo1712, UNE F.3543, AISI 316, SAE 316, JIS SUS316TKA, JIS SUS316TF, JIS SUS316FB, JIS SUSF316, JIS SUS316TKC, JIS SUS316TP, JIS SUS316TB, JIS SUS316TBS, JIS SUS316TPY, JIS SUS316TPD, JIS SUS316HTP, JIS SUS316HTB, JIS SUS316HTF, JIS SUS316F, EN X5CrNiMo17-12-2, EN 1.4401, ISO A4, GOST 0Cr17Ni12Mo2, GB 08Ch27N13M2, UNS S31600, IS X04Cr17Ni12Mo2
DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.96 g/cm³ |
| - |
22.0 °C |
Density of 7.96 g/cm³ |
DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
-100.0 °C |
Coefficient of thermal expansion of 1.49E-5 1/K |
- |
| - |
20.0 °C |
Coefficient of thermal expansion of 1.61E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.65E-5 - 1.67E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.72E-5 - 1.75E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.75E-5 - 1.77E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.81E-5 - 1.85E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.84E-5 - 1.85E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.88E-5 1/K |
- |
| - |
700.0 °C |
Coefficient of thermal expansion of 1.91E-5 1/K |
- |
| - |
800.0 °C |
Coefficient of thermal expansion of 1.94E-5 1/K |
- |
| - |
900.0 °C |
Coefficient of thermal expansion of 1.97E-5 1/K |
- |
| - |
1000.0 °C |
Coefficient of thermal expansion of 2E-5 1/K |
- |
| Max service temperature, long |
- |
Max service temperature, long of 0 - 300 °C |
- |
| Melting point |
- |
Melting point of 1230 - 1480 °C |
Typical for Austenitic Stainless Steel |
| Specific heat capacity |
-100.0 °C |
Specific heat capacity of 440 J/(kg·K) |
- |
| - |
20.0 °C |
Specific heat capacity of 472 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 487 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 503 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 512 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 520 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 530 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 541 J/(kg·K) |
- |
| - |
700.0 °C |
Specific heat capacity of 551 J/(kg·K) |
- |
| - |
800.0 °C |
Specific heat capacity of 559 J/(kg·K) |
- |
| - |
900.0 °C |
Specific heat capacity of 565 J/(kg·K) |
- |
| - |
1000.0 °C |
Specific heat capacity of 571 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 13.3 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 14.9 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 16.5 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 18.1 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 19.5 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 21 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 22.4 W/(m·K) |
- |
| - |
700.0 °C |
Thermal conductivity of 23.8 W/(m·K) |
- |
| - |
800.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 3.5 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 3.8 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 4 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 4.3 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 4.5 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.7 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.8 mm²/s |
- |
| - |
700.0 °C |
Thermal diffusivity of 5.1 mm²/s |
- |
| - |
800.0 °C |
Thermal diffusivity of 5.4 mm²/s |
- |
DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q) chemical
| Property |
Value |
| Carbon |
Carbon of 0.07 % |
| Chromium |
Chromium of 16.5 - 18.5 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 2 - 2.5 % |
| Nickel |
Nickel of 10.5 - 13.5 % |
| Phosphorus |
Phosphorus of 0.05 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.03 % |
DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.91E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 8.45E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 9.19E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 9.77E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 1.03E-6 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 1.08E-6 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.12E-6 Ω·m |
| - |
700.0 °C |
Electrical resistivity of 1.15E-6 Ω·m |
| - |
800.0 °C |
Electrical resistivity of 1.18E-6 Ω·m |
DIN 1654-5 Grade X5CrNiMo17-12-2 quenched (+Q) mechanical
| Property |
Temperature |
Value |
| Elastic modulus |
-100.0 °C |
Elastic modulus of 206 GPa |
| - |
20.0 °C |
Elastic modulus of 196 GPa |
| - |
22.0 °C |
Elastic modulus of 196.2 GPa |
| - |
24.0 °C |
Elastic modulus of 193.1 - 197.9 GPa |
| - |
100.0 °C |
Elastic modulus of 190 - 194 GPa |
| - |
149.0 °C |
Elastic modulus of 184.8 - 190.3 GPa |
| - |
200.0 °C |
Elastic modulus of 182 - 186 GPa |
| - |
260.0 °C |
Elastic modulus of 182 - 182.7 GPa |
| - |
300.0 °C |
Elastic modulus of 174 - 179 GPa |
| - |
371.0 °C |
Elastic modulus of 174.4 - 179.3 GPa |
| - |
400.0 °C |
Elastic modulus of 166 - 172 GPa |
| - |
483.0 °C |
Elastic modulus of 163.4 - 165.5 GPa |
| - |
500.0 °C |
Elastic modulus of 158 - 165 GPa |
| - |
593.0 °C |
Elastic modulus of 153.4 - 157.9 GPa |
| - |
600.0 °C |
Elastic modulus of 150 GPa |
| - |
700.0 °C |
Elastic modulus of 142 GPa |
| - |
704.0 °C |
Elastic modulus of 143.4 - 146.2 GPa |
| - |
800.0 °C |
Elastic modulus of 134 GPa |
| - |
816.0 °C |
Elastic modulus of 124.1 - 133.1 GPa |
| - |
900.0 °C |
Elastic modulus of 127 GPa |
| - |
1000.0 °C |
Elastic modulus of 120 GPa |
| Elongation |
20.0 °C |
Elongation of 45 % |
| Poisson's ratio |
22.0 °C |
Poisson's ratio of 0.29 [-] |
| - |
24.0 °C |
Poisson's ratio of 0.23 - 0.28 [-] |
| - |
149.0 °C |
Poisson's ratio of 0.24 - 0.28 [-] |
| - |
260.0 °C |
Poisson's ratio of 0.28 - 0.31 [-] |
| - |
371.0 °C |
Poisson's ratio of 0.33 - 0.36 [-] |
| - |
483.0 °C |
Poisson's ratio of 0.29 - 0.32 [-] |
| - |
593.0 °C |
Poisson's ratio of 0.32 [-] |
| - |
704.0 °C |
Poisson's ratio of 0.28 - 0.34 [-] |
| - |
816.0 °C |
Poisson's ratio of 0.22 - 0.27 [-] |
| Reduction of area |
20.0 °C |
Reduction of area of 55 % |
| Shear modulus |
22.0 °C |
Shear modulus of 75.8 GPa |
| - |
24.0 °C |
Shear modulus of 77.2 - 78.6 GPa |
| - |
149.0 °C |
Shear modulus of 74.5 GPa |
| - |
260.0 °C |
Shear modulus of 69.6 - 71 GPa |
| - |
371.0 °C |
Shear modulus of 64.1 - 67.6 GPa |
| - |
483.0 °C |
Shear modulus of 62.1 - 64.1 GPa |
| - |
593.0 °C |
Shear modulus of 57.9 - 60 GPa |
| - |
704.0 °C |
Shear modulus of 54.5 - 55.9 GPa |
| - |
816.0 °C |
Shear modulus of 51 - 52.4 GPa |
| Tensile strength |
20.0 °C |
Tensile strength of 510 - 710 MPa |
| Yield strength |
20.0 °C |
Yield strength of 205 MPa |
| Yield strength Rp0.2 |
50.0 °C |
Yield strength Rp0.2 of 196 MPa |
| - |
100.0 °C |
Yield strength Rp0.2 of 177 MPa |
| - |
150.0 °C |
Yield strength Rp0.2 of 162 MPa |
| - |
200.0 °C |
Yield strength Rp0.2 of 147 MPa |
| - |
250.0 °C |
Yield strength Rp0.2 of 137 MPa |
| - |
300.0 °C |
Yield strength Rp0.2 of 127 MPa |
| Yield strength Rp1.0 |
50.0 °C |
Yield strength Rp1.0 of 230 MPa |
| - |
100.0 °C |
Yield strength Rp1.0 of 211 MPa |
| - |
150.0 °C |
Yield strength Rp1.0 of 191 MPa |
| - |
200.0 °C |
Yield strength Rp1.0 of 177 MPa |
| - |
250.0 °C |
Yield strength Rp1.0 of 167 MPa |
| - |
300.0 °C |
Yield strength Rp1.0 of 156 MPa |
Push the boundaries of innovation with our versatile range of steel solutions.
-- Our promise
Similar or equivalent steel materials
Get a quote