EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn
EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn introduction
The stainless steel X5CrNiMo17-12-2 is usually used cold drawn as wire up to 10 mm diameter for springs or spring parts. It is highest corrosion resistant and applicable up to 250 °C.
Equivalent material: GB 0Cr17Ni12Mo2, GB S31608, IS X04Cr17Ni12Mo2, JIS SUS316, KS STS316, ASTM 316, UNS S31600, GB 06Cr17Ni12Mo2, ISO X5CrNiMo17-12-2, ASTM A313Type316, DIN X5CrNiMo18-10, DIN 1.4401, DIN 316S42, DIN 316S33, DIN X5CrNiMo17-12-2, DIN X 5 CrNiMo 18 10, AFNOR Z7CND17-11-02, BS 316S16, UNI X5CrNiMo1712, SS 2347, UNE F.3543, AISI 316, SAE 316, JIS SUS316TKA, JIS SUS316TF, JIS SUS316FB, JIS SUSF316, JIS SUS316TKC, JIS SUS316TP, JIS SUS316TB, JIS SUS316TBS, JIS SUS316TPY, JIS SUS316TPD, JIS SUS316HTP, JIS SUS316HTB, JIS SUS316HTF, JIS SUS316F, EN 1.4401, ISO A4, GOST 0Cr17Ni12Mo2, GB 08Ch27N13M2
EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.96 g/cm³ |
| - |
22.0 °C |
Density of 7.96 g/cm³ |
EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
-100.0 °C |
Coefficient of thermal expansion of 1.49E-5 1/K |
- |
| - |
20.0 °C |
Coefficient of thermal expansion of 1.61E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.67E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.72E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.77E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.81E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.84E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.88E-5 1/K |
- |
| - |
700.0 °C |
Coefficient of thermal expansion of 1.91E-5 1/K |
- |
| - |
800.0 °C |
Coefficient of thermal expansion of 1.94E-5 1/K |
- |
| - |
900.0 °C |
Coefficient of thermal expansion of 1.97E-5 1/K |
- |
| - |
1000.0 °C |
Coefficient of thermal expansion of 2E-5 1/K |
- |
| Max service temperature, long |
- |
Max service temperature, long of -100 - 270 °C |
- |
| Melting point |
- |
Melting point of 1230 - 1480 °C |
Typical for Austenitic Stainless Steel |
| Specific heat capacity |
-100.0 °C |
Specific heat capacity of 440 J/(kg·K) |
- |
| - |
20.0 °C |
Specific heat capacity of 472 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 487 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 503 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 512 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 520 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 530 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 541 J/(kg·K) |
- |
| - |
700.0 °C |
Specific heat capacity of 551 J/(kg·K) |
- |
| - |
800.0 °C |
Specific heat capacity of 559 J/(kg·K) |
- |
| - |
900.0 °C |
Specific heat capacity of 565 J/(kg·K) |
- |
| - |
1000.0 °C |
Specific heat capacity of 571 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 13.3 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 14.9 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 16.5 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 18.1 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 19.5 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 21 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 22.4 W/(m·K) |
- |
| - |
700.0 °C |
Thermal conductivity of 23.8 W/(m·K) |
- |
| - |
800.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 3.5 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 3.8 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 4 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 4.3 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 4.5 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.7 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.8 mm²/s |
- |
| - |
700.0 °C |
Thermal diffusivity of 5.1 mm²/s |
- |
| - |
800.0 °C |
Thermal diffusivity of 5.4 mm²/s |
- |
EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn chemical
| Property |
Value |
| Carbon |
Carbon of 0.07 % |
| Chromium |
Chromium of 16.5 - 18.5 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 2 - 2.5 % |
| Nickel |
Nickel of 10 - 13 % |
| Nitrogen |
Nitrogen of 0.11 % |
| Phosphorus |
Phosphorus of 0.05 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.015 % |
EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.91E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 8.45E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 9.19E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 9.77E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 1.03E-6 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 1.08E-6 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.12E-6 Ω·m |
| - |
700.0 °C |
Electrical resistivity of 1.15E-6 Ω·m |
| - |
800.0 °C |
Electrical resistivity of 1.18E-6 Ω·m |
EN 10270-3 Grade X5CrNiMo17-12-2 cold drawn mechanical
| Property |
Temperature |
Value |
| Elastic modulus |
-100.0 °C |
Elastic modulus of 206 GPa |
| - |
20.0 °C |
Elastic modulus of 175 - 196 GPa |
| - |
22.0 °C |
Elastic modulus of 196.2 GPa |
| - |
24.0 °C |
Elastic modulus of 193.1 - 197.9 GPa |
| - |
100.0 °C |
Elastic modulus of 190 GPa |
| - |
149.0 °C |
Elastic modulus of 184.8 - 190.3 GPa |
| - |
200.0 °C |
Elastic modulus of 182 GPa |
| - |
260.0 °C |
Elastic modulus of 182 - 182.7 GPa |
| - |
300.0 °C |
Elastic modulus of 174 GPa |
| - |
371.0 °C |
Elastic modulus of 174.4 - 179.3 GPa |
| - |
400.0 °C |
Elastic modulus of 166 GPa |
| - |
483.0 °C |
Elastic modulus of 163.4 - 165.5 GPa |
| - |
500.0 °C |
Elastic modulus of 158 GPa |
| - |
593.0 °C |
Elastic modulus of 153.4 - 157.9 GPa |
| - |
600.0 °C |
Elastic modulus of 150 GPa |
| - |
700.0 °C |
Elastic modulus of 142 GPa |
| - |
704.0 °C |
Elastic modulus of 143.4 - 146.2 GPa |
| - |
800.0 °C |
Elastic modulus of 134 GPa |
| - |
816.0 °C |
Elastic modulus of 124.1 - 133.1 GPa |
| - |
900.0 °C |
Elastic modulus of 127 GPa |
| - |
1000.0 °C |
Elastic modulus of 120 GPa |
| Poisson's ratio |
20.0 °C |
Poisson's ratio of 0.3 [-] |
| - |
22.0 °C |
Poisson's ratio of 0.29 [-] |
| - |
24.0 °C |
Poisson's ratio of 0.23 - 0.28 [-] |
| - |
149.0 °C |
Poisson's ratio of 0.24 - 0.28 [-] |
| - |
260.0 °C |
Poisson's ratio of 0.28 - 0.31 [-] |
| - |
371.0 °C |
Poisson's ratio of 0.33 - 0.36 [-] |
| - |
483.0 °C |
Poisson's ratio of 0.29 - 0.32 [-] |
| - |
593.0 °C |
Poisson's ratio of 0.32 [-] |
| - |
704.0 °C |
Poisson's ratio of 0.28 - 0.34 [-] |
| - |
816.0 °C |
Poisson's ratio of 0.22 - 0.27 [-] |
| Shear modulus |
20.0 °C |
Shear modulus of 68 - 71 GPa |
| - |
22.0 °C |
Shear modulus of 75.8 GPa |
| - |
24.0 °C |
Shear modulus of 77.2 - 78.6 GPa |
| - |
149.0 °C |
Shear modulus of 74.5 GPa |
| - |
260.0 °C |
Shear modulus of 69.6 - 71 GPa |
| - |
371.0 °C |
Shear modulus of 64.1 - 67.6 GPa |
| - |
483.0 °C |
Shear modulus of 62.1 - 64.1 GPa |
| - |
593.0 °C |
Shear modulus of 57.9 - 60 GPa |
| - |
704.0 °C |
Shear modulus of 54.5 - 55.9 GPa |
| - |
816.0 °C |
Shear modulus of 51 - 52.4 GPa |
| Tensile strength |
20.0 °C |
Tensile strength of 1050 - 1990 MPa |
Combine strength and elegance seamlessly with our range of aesthetically pleasing steel products, adding grace to your designs.
-- Our promise
Similar or equivalent steel materials
Get a quote