EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT)
EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT) introduction
Make X5CrNiMo17-12-2 is comparable to X 5 CrNiMo 17-12-2 acc. to DIN17440 : 1985-07. The material is an austenitic CrNiMo-steel of improved resistance to non-oxidizing acids and halogenated media, to intercrystalline corrosion, but only in delivery condition. It is usable for mirror finishing and cold formable. Application for acid resistant instruments in chemical and pharmaceutical industry, cellulose, rubber, coloring, fatty acid, textile and rayon industry, in petrochemical industry, for parts of medical and photographical supply, in sewages, for higher chloride-contents. In construction trade for construction parts of highest corrosion load, (e.g. masonry anchorage coupler in concrete, smokestacks, sanitary engineering, exterior facades, elevators). The Mo-alloyed rust-resistant steel is approved for construction parts of carrying function.
Equivalent material: GB 06Cr17Ni12Mo2, GB S31608, IS X04Cr17Ni12Mo2, ISO X5CrNiMo17-12, JIS SUSF316, JIS SUS316FB, GOST 08Ch16N11M3, GOST 08Х16Н11M3, KS STSF316, ASTM A473Type316, ASTM A965 Grade F316, SAE 316, SAE Type316, SAE F316, SAE TypeF316, UNS S31600, DIN X5CrNiMo18-10, DIN 1.4401, DIN 316S42, DIN 316S33, DIN X5CrNiMo17-12-2, DIN X 5 CrNiMo 18 10, AFNOR Z7CND17-11-02, BS 316S16, UNI X5CrNiMo1712, SS 2347, UNE F.3543, AISI 316, JIS SUS316, JIS SUS316TKA, JIS SUS316TF, JIS SUS316TKC, JIS SUS316TP, JIS SUS316TB, JIS SUS316TBS, JIS SUS316TPY, JIS SUS316TPD, JIS SUS316HTP, JIS SUS316HTB, JIS SUS316HTF, JIS SUS316F, EN 1.4401, ISO A4, GOST 0Cr17Ni12Mo2, GB 08Ch27N13M2, ASTM 316
EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.96 - 8 g/cm³ |
| - |
22.0 °C |
Density of 7.96 g/cm³ |
EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
-100.0 °C |
Coefficient of thermal expansion of 1.49E-5 1/K |
- |
| - |
20.0 °C |
Coefficient of thermal expansion of 1.61E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.6E-5 - 1.67E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.65E-5 - 1.72E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.7E-5 - 1.77E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.75E-5 - 1.81E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.8E-5 - 1.84E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.88E-5 1/K |
- |
| - |
700.0 °C |
Coefficient of thermal expansion of 1.91E-5 1/K |
- |
| - |
800.0 °C |
Coefficient of thermal expansion of 1.94E-5 1/K |
- |
| - |
900.0 °C |
Coefficient of thermal expansion of 1.97E-5 1/K |
- |
| - |
1000.0 °C |
Coefficient of thermal expansion of 2E-5 1/K |
- |
| Melting point |
- |
Melting point of 1230 - 1480 °C |
Typical for Austenitic Stainless Steel |
| Specific heat capacity |
-100.0 °C |
Specific heat capacity of 440 J/(kg·K) |
- |
| - |
20.0 °C |
Specific heat capacity of 472 - 500 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 487 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 503 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 512 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 520 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 530 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 541 J/(kg·K) |
- |
| - |
700.0 °C |
Specific heat capacity of 551 J/(kg·K) |
- |
| - |
800.0 °C |
Specific heat capacity of 559 J/(kg·K) |
- |
| - |
900.0 °C |
Specific heat capacity of 565 J/(kg·K) |
- |
| - |
1000.0 °C |
Specific heat capacity of 571 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 13.3 - 15 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 14.9 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 16.5 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 18.1 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 19.5 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 21 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 22.4 W/(m·K) |
- |
| - |
700.0 °C |
Thermal conductivity of 23.8 W/(m·K) |
- |
| - |
800.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 3.5 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 3.8 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 4 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 4.3 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 4.5 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.7 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.8 mm²/s |
- |
| - |
700.0 °C |
Thermal diffusivity of 5.1 mm²/s |
- |
| - |
800.0 °C |
Thermal diffusivity of 5.4 mm²/s |
- |
EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.07 % |
| Chromium |
Chromium of 16.5 - 18.5 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 2 - 2.5 % |
| Nickel |
Nickel of 10 - 13 % |
| Nitrogen |
Nitrogen of 0.11 % |
| Phosphorus |
Phosphorus of 0.05 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.03 % |
EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.91E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 8.45E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 9.19E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 9.77E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 1.03E-6 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 1.08E-6 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.12E-6 Ω·m |
| - |
700.0 °C |
Electrical resistivity of 1.15E-6 Ω·m |
| - |
800.0 °C |
Electrical resistivity of 1.18E-6 Ω·m |
EN 10250-4 Grade X5CrNiMo17-12-2 solution annealed (+AT) mechanical
| Property |
Temperature |
Value |
| Elastic modulus |
-100.0 °C |
Elastic modulus of 206 GPa |
| - |
20.0 °C |
Elastic modulus of 196 - 200 GPa |
| - |
22.0 °C |
Elastic modulus of 196.2 GPa |
| - |
24.0 °C |
Elastic modulus of 193.1 - 197.9 GPa |
| - |
100.0 °C |
Elastic modulus of 190 - 194 GPa |
| - |
149.0 °C |
Elastic modulus of 184.8 - 190.3 GPa |
| - |
200.0 °C |
Elastic modulus of 182 - 186 GPa |
| - |
260.0 °C |
Elastic modulus of 182 - 182.7 GPa |
| - |
300.0 °C |
Elastic modulus of 174 - 179 GPa |
| - |
371.0 °C |
Elastic modulus of 174.4 - 179.3 GPa |
| - |
400.0 °C |
Elastic modulus of 166 - 172 GPa |
| - |
483.0 °C |
Elastic modulus of 163.4 - 165.5 GPa |
| - |
500.0 °C |
Elastic modulus of 158 - 165 GPa |
| - |
593.0 °C |
Elastic modulus of 153.4 - 157.9 GPa |
| - |
600.0 °C |
Elastic modulus of 150 GPa |
| - |
700.0 °C |
Elastic modulus of 142 GPa |
| - |
704.0 °C |
Elastic modulus of 143.4 - 146.2 GPa |
| - |
800.0 °C |
Elastic modulus of 134 GPa |
| - |
816.0 °C |
Elastic modulus of 124.1 - 133.1 GPa |
| - |
900.0 °C |
Elastic modulus of 127 GPa |
| - |
1000.0 °C |
Elastic modulus of 120 GPa |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 30 % |
| Poisson's ratio |
22.0 °C |
Poisson's ratio of 0.29 [-] |
| - |
24.0 °C |
Poisson's ratio of 0.23 - 0.28 [-] |
| - |
149.0 °C |
Poisson's ratio of 0.24 - 0.28 [-] |
| - |
260.0 °C |
Poisson's ratio of 0.28 - 0.31 [-] |
| - |
371.0 °C |
Poisson's ratio of 0.33 - 0.36 [-] |
| - |
483.0 °C |
Poisson's ratio of 0.29 - 0.32 [-] |
| - |
593.0 °C |
Poisson's ratio of 0.32 [-] |
| - |
704.0 °C |
Poisson's ratio of 0.28 - 0.34 [-] |
| - |
816.0 °C |
Poisson's ratio of 0.22 - 0.27 [-] |
| Shear modulus |
22.0 °C |
Shear modulus of 75.8 GPa |
| - |
24.0 °C |
Shear modulus of 77.2 - 78.6 GPa |
| - |
149.0 °C |
Shear modulus of 74.5 GPa |
| - |
260.0 °C |
Shear modulus of 69.6 - 71 GPa |
| - |
371.0 °C |
Shear modulus of 64.1 - 67.6 GPa |
| - |
483.0 °C |
Shear modulus of 62.1 - 64.1 GPa |
| - |
593.0 °C |
Shear modulus of 57.9 - 60 GPa |
| - |
704.0 °C |
Shear modulus of 54.5 - 55.9 GPa |
| - |
816.0 °C |
Shear modulus of 51 - 52.4 GPa |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 500 - 700 MPa |
| Yield strength Rp0.2 |
100.0 °C |
Yield strength Rp0.2 of 177 MPa |
| - |
150.0 °C |
Yield strength Rp0.2 of 162 MPa |
| - |
200.0 °C |
Yield strength Rp0.2 of 147 MPa |
| - |
250.0 °C |
Yield strength Rp0.2 of 137 MPa |
| - |
300.0 °C |
Yield strength Rp0.2 of 127 MPa |
| - |
350.0 °C |
Yield strength Rp0.2 of 120 MPa |
| - |
400.0 °C |
Yield strength Rp0.2 of 115 MPa |
| - |
450.0 °C |
Yield strength Rp0.2 of 112 MPa |
| - |
500.0 °C |
Yield strength Rp0.2 of 110 MPa |
| - |
550.0 °C |
Yield strength Rp0.2 of 108 MPa |
| Yield strength Rp0.2, transverse |
20.0 °C |
Yield strength Rp0.2, transverse of 200 MPa |
| Yield strength Rp1.0 |
100.0 °C |
Yield strength Rp1.0 of 211 MPa |
| - |
150.0 °C |
Yield strength Rp1.0 of 191 MPa |
| - |
200.0 °C |
Yield strength Rp1.0 of 177 MPa |
| - |
250.0 °C |
Yield strength Rp1.0 of 167 MPa |
| - |
300.0 °C |
Yield strength Rp1.0 of 156 MPa |
| - |
350.0 °C |
Yield strength Rp1.0 of 150 MPa |
| - |
400.0 °C |
Yield strength Rp1.0 of 144 MPa |
| - |
450.0 °C |
Yield strength Rp1.0 of 141 MPa |
| - |
500.0 °C |
Yield strength Rp1.0 of 139 MPa |
| - |
550.0 °C |
Yield strength Rp1.0 of 137 MPa |
| Yield strength Rp1.0, transverse |
20.0 °C |
Yield strength Rp1.0, transverse of 235 MPa |
Experience the unmatched durability and longevity of our steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote