JIS G3141 Grade SPCE 1/4 hard
Equivalent material: DIN 1.0312, DIN St 15, DIN DC05, AFNOR DC05, BS DC05, JIS SPCF, JIS CR4, EN DC05, EN 1.0312, ISO CR4, ISO 04, ISO HR4, DIN 1.0338, DIN St 14, DIN St14, DIN St 4, DIN DC04, AFNOR ES, AFNOR DC04, BS 1CR, BS 1CS, BS 1HR, BS 1HS, BS CR1, BS DC04, UNI FeP04, UNE AP04, JIS CR3, EN DC04, EN FeP04, EN DC04, EN 1.0338, ISO CR3, ISO CR24, GOST 08JuA, GB/T 08F, GB/T U20080
JIS G3141 Grade SPCE 1/4 hard general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
JIS G3141 Grade SPCE 1/4 hard thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K |
Typical for Low Carbon Steel |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 465 J/(kg·K) |
Typical for Low Carbon Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 25 - 93 W/(m·K) |
Typical for Low Carbon Steel |
JIS G3141 Grade SPCE 1/4 hard magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
JIS G3141 Grade SPCE 1/4 hard electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m |
Typical for Carbon Steel |
JIS G3141 Grade SPCE 1/4 hard mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 200 - 215 GPa |
Typical for Low Carbon Steel |
| Elongation A5 |
23.0 °C |
Elongation A5 of 36 - 43 % |
- |
| Hardness, Rockwell B |
23.0 °C |
Hardness, Rockwell B of 65 - 80 [-] |
- |
| Hardness, Vickers |
23.0 °C |
Hardness, Vickers of 115 - 150 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 82 GPa |
Typical for Low Carbon Steel |
| Tensile strength |
23.0 °C |
Tensile strength of 270 MPa |
- |
We offer top-notch steel without compromising on quality or affordability.
-- Our promise
Similar or equivalent steel materials
Get a quote