EN 10152 Grade DC04 skin passed
EN 10152 Grade DC04 skin passed introduction
The cold rolled, electrolytically zinc coated (+ZE) steel DC04 (special deep drawing quality) is suitable for cold forming of complexest profile forms, construction components and molded parts.
Weldability is given when using the normal processes.
Application:
metal furniture, shaft processing, radiators and ventilators, the manufacturing of tubes and small profiles and in the automotive industry for complex body outer and inner parts, wings, side frames, bottom plates, spare wheel wells and door outside and inner panels
Equivalent material: IS CR3, IS SECF, ASTM A1008DDS, ASTM DDS, DIN St4, DIN St14, DIN St14O3, DIN St14-03, AFNOR ES, BS CR1, IS SECE, SS 14-11-47, ASTM CSTypeA.BorC, DIN St14ZE, AS CA3, AS CA4, IS EDD, IS SPCE, ASTM A1008DSTypeA, ASTM A1008DSTypeB, DIN 1.0338, EN FeP04, EN DC04+Z, EN 1.0338, DIN St 14, DIN St 4, DIN DC04, AFNOR DC04, UNI FeP04, UNE AP04, AISI 1010, BS 1CR, BS 1CS, BS 1HR, BS 1HS, BS DC04, SAE 1010, JIS SPCE, JIS SPCF, JIS CR3, ISO CR3, ISO CR24, GOST 08JuA, GB/T 08F, GB/T U20080, ASTM 1010
EN 10152 Grade DC04 skin passed general
| Property |
Value |
Comment |
| Density |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
EN 10152 Grade DC04 skin passed thermal
| Property |
Value |
Comment |
| Coefficient of thermal expansion |
Coefficient of thermal expansion of 1.32e-05 - 1.38e-05 1/K |
Typical for Low Carbon Steel |
| Max service temperature |
Max service temperature of 364.5 °C |
Predicted Value, Long |
| - |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
Specific heat capacity of 465 J/(kg·K) |
Typical for Low Carbon Steel |
| Thermal conductivity |
Thermal conductivity of 25 - 93 W/(m·K) |
Typical for Low Carbon Steel |
EN 10152 Grade DC04 skin passed chemical
| Property |
Value |
Condition |
Related Standards |
Shape |
| Carbon |
Carbon of 0.08 % |
skin passed |
EN 10152 |
Strip, Sheet |
| Manganese |
Manganese of 0.4 % |
skin passed |
EN 10152 |
Strip, Sheet |
| Phosphorus |
Phosphorus of 0.03 % |
skin passed |
EN 10152 |
Strip, Sheet |
| Sulfur |
Sulfur of 0.03 % |
skin passed |
EN 10152 |
Strip, Sheet |
EN 10152 Grade DC04 skin passed magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
EN 10152 Grade DC04 skin passed electrical
| Property |
Value |
Comment |
| Electrical conductivity |
Electrical conductivity of 8 S/m |
Predicted Value |
| Electrical resistivity |
Electrical resistivity of 1.43e-07 - 1.74e-07 Ω·m |
Typical for Carbon Steel |
EN 10152 Grade DC04 skin passed mechanical
| Property |
Temperature |
Value |
Condition |
Related Standards |
Shape |
Comment |
| Elastic modulus |
- |
Elastic modulus of 200 - 215 GPa |
- |
- |
- |
Typical for Low Carbon Steel |
| Elongation |
- |
Elongation of 14.4 % |
- |
- |
- |
Predicted Value, A200 |
| - |
- |
Elongation of 19.9 % |
- |
- |
- |
Predicted Value, A5 |
| - |
- |
Elongation of 21.7 % |
- |
- |
- |
Predicted Value, A50 |
| - |
- |
Elongation of 21.7 % |
- |
- |
- |
Predicted Value, Transverse |
| - |
- |
Elongation of 22.4 % |
- |
- |
- |
Predicted Value |
| - |
20 °C |
Elongation of 33 % |
skin passed |
EN 10152 |
Strip |
A80 Transverse |
| - |
20 °C |
Elongation of 35 % |
skin passed |
EN 10152 |
Strip |
A80 Transverse |
| - |
20 °C |
Elongation of 37 % |
skin passed |
EN 10152 |
Strip |
A80 Transverse |
| - |
20 °C |
Elongation of 37 % |
skin passed |
EN 10152 |
Strip, Sheet |
A80 |
| Hardness, Brinell |
- |
Hardness, Brinell of 266 [-] |
- |
- |
- |
Predicted Value, Transverse |
| Poisson's ratio |
- |
Poisson's ratio of 0.29 [-] |
- |
- |
- |
Typical for Low Carbon Steel |
| Reduction of area |
- |
Reduction of area of 42.0 % |
- |
- |
- |
Predicted Value |
| - |
- |
Reduction of area of 43.5 % |
- |
- |
- |
Predicted Value, Transverse |
| Shear modulus |
- |
Shear modulus of 82 GPa |
- |
- |
- |
Typical for Low Carbon Steel |
| Shear strength |
- |
Shear strength of 562.8 MPa |
- |
- |
- |
Predicted Value |
| Tensile strength |
20 °C |
Tensile strength of 270 - 350 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Tensile strength of 270 - 350 MPa |
skin passed |
EN 10152 |
Strip, Sheet |
- |
| Yield strength |
- |
Yield strength of 279.1 MPa |
- |
- |
- |
Predicted Value, RP05 |
| - |
- |
Yield strength of 286.5 MPa |
- |
- |
- |
Predicted Value, RP1 Transverse |
| - |
- |
Yield strength of 293.2 MPa |
- |
- |
- |
Predicted Value, RP1 |
| - |
- |
Yield strength of 364.4 MPa |
- |
- |
- |
Predicted Value, RP02 Transverse |
| - |
- |
Yield strength of 546.1 MPa |
- |
- |
- |
Predicted Value, RP02 |
| - |
- |
Yield strength of 627.3 MPa |
- |
- |
- |
Predicted Value, RP002 |
| - |
20 °C |
Yield strength of 140 - 260 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Yield strength of 140 - 240 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Yield strength of 140 - 220 MPa |
skin passed |
EN 10152 |
Strip |
Transverse |
| - |
20 °C |
Yield strength of 140 - 220 MPa |
skin passed |
EN 10152 |
Strip, Sheet |
- |
Create sustainable legacies with our eco-friendly steel materials and practices.
-- Our promise
Similar or equivalent steel materials
Get a quote