EN 10277-3 Grade 11SMnPb30 cold drawn
EN 10277-3 Grade 11SMnPb30 cold drawn introduction
Free cutting steel 11SMnPb30 is unsuitable for heat-treatment and is preferred steel 11SMn30 for higher requirements to machinability and surface appearance. 11SMnPb30 shows a lower cracking sensitivity compared to steel with a higher S-content (11SMn37, 11SMnPb37). Application for bulk parts in car industry as well as in apparatus and equipment engineering. As a bright steel product it is used in the form of bars, bright, straight, in various conditions (see DIN EN 10277 : 1999-10).
Equivalent material: AFNOR S250Pb, ISO 11SMnPb28, UNI CF9SMnPb28, JIS SUM22L, SS 1914-04, VSM 9SMnPb28, UNE F.2112-11SMnPb28, SAE 12L14, DIN 9SMnPb28, AS 12L14, ISO 11SMnPb30, ASTM A108 Grade 12L14, UNS G12144, DIN 1.0718, DIN 11SMnPb30, AFNOR 11SMnPb30, BS 11SMnPb30, SS 1914, UNE 11SMnPb28, AISI 1215, AISI 12L13, AISI 12L14, SAE 1215, SAE 12L13, JIS SUM23L, JIS SUM24L, JIS 11SMnPb28, EN 1.0718, GB/T U72152, GB/T Y15Pb, UNS G12134, UNS G12150
EN 10277-3 Grade 11SMnPb30 cold drawn general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.85 g/cm³ |
EN 10277-3 Grade 11SMnPb30 cold drawn thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.1E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.18E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.32E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 460 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 480 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 520 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 610 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 54.4 W/(m·K) |
- |
EN 10277-3 Grade 11SMnPb30 cold drawn chemical
| Property |
Value |
| Carbon |
Carbon of 0.14 % |
| Lead |
Lead of 0.2 - 0.35 % |
| Manganese |
Manganese of 0.9 - 1.3 % |
| Phosphorus |
Phosphorus of 0.11 % |
| Silicon |
Silicon of 0.05 % |
| Sulfur |
Sulfur of 0.27 - 0.33 % |
EN 10277-3 Grade 11SMnPb30 cold drawn magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
EN 10277-3 Grade 11SMnPb30 cold drawn electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 1.1E-7 Ω·m |
EN 10277-3 Grade 11SMnPb30 cold drawn mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 210 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 193 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 185 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 175 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 6 - 9 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Shear modulus |
20.0 °C |
Shear modulus of 81 GPa |
- |
| Tensile strength |
20.0 °C |
Tensile strength of 360 - 810 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 245 - 440 MPa |
- |
Our durable steel materials redefine durability, delivering long-lasting performance and reliability.
-- Our promise
Similar or equivalent steel materials
Get a quote