EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT)
EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT) introduction
The make X2CrNiMoN22-5-3 is comparable to X 2 CrNiMoN 22 5 3 acc. to SEW400 : 1991-02. The material is a ferritic-austenitic steel of high resistance to stress corrosion in chloride-containing media. Favorable resistance to pitting and intercrystalline corrosion also in welded condition. The steel shows favorable general resistance in many corrosive media such as organic or inorganic acids, resistance under acid gas conditions and well warm and cold formability and weldability. Application: chemical and petrochemical industrie, for pressure boiler and tubes, in offshore-engineering.
Equivalent material: GB 022Cr22Ni5Mo3N, GB S22053, ISO X2CrNiMoN22-5-3, GOST 03Ch22N5AM3, GOST 03Х22Н5AM3, ASTM A1049 Grade F51, UNS S31803, DIN 1.4462, DIN 22-5-3, DIN S31803, DIN X2CrNiMoN22-5-3, AFNOR Z3CND22-05Az, BS 318S13, SS 2377, AISI 2205, AISI S31803, AISI S32205, SAE 2205, SAE S31803, SAE S32205, JIS SUS329J3L, JIS SUS329J3LTP, JIS SUS329J3LTB, EN 1.4462, ISO 4462-318-03-I, GOST 02Ch22N5AM2, ASTM F 51, ASTM S31803, ASTM 4A, ASTM F 60, ASTM 2205, ASTM Grade F51, ASTM S32205, UNS S32205
EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.8 g/cm³ |
EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.3E-5 - 1.33E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.35E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.4E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 300 °C |
Typical for Duplex Stainless Steel |
| Melting point |
- |
Melting point of 1375 - 1450 °C |
Typical for Duplex Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 500 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 13.4 - 15 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 14.9 W/(m·K) |
- |
EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.03 % |
| Chromium |
Chromium of 21 - 23 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 2.5 - 3.5 % |
| Nickel |
Nickel of 4.5 - 6.5 % |
| Nitrogen |
Nitrogen of 0.1 - 0.22 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.015 % |
EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.85E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 8.44E-7 Ω·m |
EN 10250-4 Grade X2CrNiMoN22-5-3 solution annealed (+AT) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 - 212 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 194 - 206 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 186 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 180 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 25 % |
- |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 20 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Duplex Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Duplex Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 650 - 880 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 650 - 880 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 450 MPa |
- |
| - |
100.0 °C |
Yield strength Rp0.2 of 360 MPa |
- |
| - |
150.0 °C |
Yield strength Rp0.2 of 335 MPa |
- |
| - |
200.0 °C |
Yield strength Rp0.2 of 315 MPa |
- |
| - |
250.0 °C |
Yield strength Rp0.2 of 300 MPa |
- |
Have confidence in the strength and durability of our steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote