EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT)
EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT) introduction
Trademark X2CrNiMoN22-5-3 is comparable to X 2 CrNiMoN 22 5 3 acc. to SEW 400-91. This material is a ferritic-austenitic steel with high resistance to stress corrosion in chloride containing media. Favorable resistance to pitting corrosion and intercrystalline corrosion also in welded condition. The steel shows good general resistance in many corrosive media, such as organic and inorganic acids, resistance under acid gas conditions, good cold and warm formability and welding suitability.
Application: chemical and petrochemical industry, for pressure tanks, heat exchangers and tubes, in offshore-technics. Application temperature -10 to 280 °C.
Equivalent material: GB 022Cr22Ni5Mo3N, GB S22253, ASTM A1049 Grade F60, ASTM A1049 Grade F51, ISO X2CrNiMoN22-5-3, ASTM Grade F60, ASTM F51, DIN 1.4462, DIN 22-5-3, DIN S31803, DIN X2CrNiMoN22-5-3, AFNOR Z3CND22-05Az, BS 318S13, SS 2377, AISI 2205, AISI S31803, AISI S32205, SAE 2205, SAE S31803, SAE S32205, JIS SUS329J3L, JIS SUS329J3LTP, JIS SUS329J3LTB, EN 1.4462, ISO 4462-318-03-I, GOST 02Ch22N5AM2, ASTM F 51, ASTM S31803, ASTM 4A, ASTM F 60, ASTM 2205, ASTM Grade F51, ASTM S32205, UNS S31803, UNS S32205
EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.8 g/cm³ |
EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.3E-5 - 1.33E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.35E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.4E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 300 °C |
Typical for Duplex Stainless Steel |
| Max service temperature, long |
- |
Max service temperature, long of -10 - 280 °C |
- |
| Melting point |
- |
Melting point of 1375 - 1450 °C |
Typical for Duplex Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 500 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 13.4 - 15 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 14.9 W/(m·K) |
- |
EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.03 % |
| Chromium |
Chromium of 21 - 23 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 2.5 - 3.5 % |
| Nickel |
Nickel of 4.5 - 6.5 % |
| Nitrogen |
Nitrogen of 0.1 - 0.22 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.015 % |
EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.85E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 8.44E-7 Ω·m |
EN 10222-5 Grade X2CrNiMoN22-5-3 solution annealed (+AT) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 - 212 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 194 - 206 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 186 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 180 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 25 - 30 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Duplex Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Duplex Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 680 - 880 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 450 MPa |
- |
We set new standards in steel manufacturing, pushing boundaries to deliver exceptional quality.
-- Our promise
Similar or equivalent steel materials
Get a quote