EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT)
EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) introduction
Material X 2 CrNiMoN 17 13 5 (now: X2CrNiMoN17-13-5), material number 1.4539, is applicated acc. to VdTÜV-Wbl 405 : 2000-12 for pressure vessels acc. to TRB 100 and AD-data sheets W 2 and W 10 from -196 to 400 °C. and for pressure gas tanks as per TRG 201 and TRG 203 from -196 to 400 °C. Further application in nuclear power engineering as far as nuclear rules or object-related specifications permit use from -196 to 400 °C. The austenitic rolled and forged steel is cold and warm formable. Its welding suitability is allowing for general accepted engineering rules examined for the following welding methods: arc hand welding, tungsten inert-gas welding, submerged welding and plasma welding. A pre-heating is not necessary, a heat after treatment (solution annealing with subsequent quenching) is required only in certain cases (special corrosion load). Steel X2CrNiMoN17-13-5 is comparable to X 2 CrNiMoN 17 13 5 acc. to DIN 17440 : 1985-07 (invalid). The material shows high pitting and crevice corrosion resistance (more favorable properties than 1.4436) as well as stress corrosion resistance, highest general resistance in many organic acids with high concentration and temperature, e.g. in nonoxidizing acids and chloride containing media (seawater, hypochloride base), also in inorganic and mixed acids as well as resistance to intercrystalline corrosion also in sensitized condition. Application in reactor industry, offshore technology, chemical industry.
Equivalent material: SFS 772, SFS X2CrNiMoN18-14-5, AFNOR Z2CNDU17-16, ISO ISO9328-7, ISO ISOTS15510, ÖNORM X2CrNiMoN17-13-5KW, ASTM 317LNM, DIN X2CrNiMoN17-13-5, GB 022Cr19Ni16Mo5N, GB S31723, ISO 4439-317-26-E, ISO AM35B, ISO X2CrNiMoN17-13-5, ASTM A276Type317LMN, ASTM A480Type317LMN, ASTM A959UNSS31726, UNS S31726, SAE 317LMN, AISI Type317LMN, DIN 1.4439, DIN G-X3CrNiMoN17-13-5, AFNOR Z3CND18-14-05Az, UNE F.3544, AISI 317LMN, JIS SUS317J1, EN 1.4439, ASTM 317LMN, ASTM Grade F48
EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 8 - 8.01 g/cm³ |
EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
-100.0 °C |
Coefficient of thermal expansion of 1.49E-5 1/K |
- |
| - |
20.0 °C |
Coefficient of thermal expansion of 1.61E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.6E-5 - 1.67E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.65E-5 - 1.72E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.7E-5 - 1.77E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.75E-5 - 1.81E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.8E-5 - 1.84E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.88E-5 1/K |
- |
| - |
700.0 °C |
Coefficient of thermal expansion of 1.91E-5 1/K |
- |
| - |
800.0 °C |
Coefficient of thermal expansion of 1.94E-5 1/K |
- |
| - |
900.0 °C |
Coefficient of thermal expansion of 1.97E-5 1/K |
- |
| - |
1000.0 °C |
Coefficient of thermal expansion of 2E-5 1/K |
- |
| Max service temperature, long |
- |
Max service temperature, long of -196 - 400 °C |
- |
| Melting point |
- |
Melting point of 1230 - 1480 °C |
Typical for Austenitic Stainless Steel |
| Specific heat capacity |
-100.0 °C |
Specific heat capacity of 440 J/(kg·K) |
- |
| - |
20.0 °C |
Specific heat capacity of 472 - 500 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 487 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 503 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 512 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 520 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 530 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 541 J/(kg·K) |
- |
| - |
700.0 °C |
Specific heat capacity of 551 J/(kg·K) |
- |
| - |
800.0 °C |
Specific heat capacity of 559 J/(kg·K) |
- |
| - |
900.0 °C |
Specific heat capacity of 565 J/(kg·K) |
- |
| - |
1000.0 °C |
Specific heat capacity of 571 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 13.5 - 14 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 14.9 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 16.7 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 18.3 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 19.8 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 21.3 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 22.7 W/(m·K) |
- |
| - |
700.0 °C |
Thermal conductivity of 24.2 W/(m·K) |
- |
| - |
800.0 °C |
Thermal conductivity of 25.6 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 3.6 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 3.7 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 4 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 4.4 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 4.6 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.7 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.9 mm²/s |
- |
| - |
700.0 °C |
Thermal diffusivity of 5.2 mm²/s |
- |
| - |
800.0 °C |
Thermal diffusivity of 5.5 mm²/s |
- |
EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.03 % |
| Chromium |
Chromium of 16.5 - 18.5 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 4 - 5 % |
| Nickel |
Nickel of 12.5 - 14.5 % |
| Nitrogen |
Nitrogen of 0.12 - 0.22 % |
| Phosphorus |
Phosphorus of 0.05 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.015 % |
EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.75E-7 - 8.5E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 8.42E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 9.04E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 9.62E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 1.01E-6 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 1.06E-6 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.1E-6 Ω·m |
| - |
700.0 °C |
Electrical resistivity of 1.13E-6 Ω·m |
| - |
800.0 °C |
Electrical resistivity of 1.16E-6 Ω·m |
EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) mechanical
| Property |
Temperature |
Value |
| Elastic modulus |
-100.0 °C |
Elastic modulus of 206 GPa |
| - |
20.0 °C |
Elastic modulus of 196 - 200 GPa |
| - |
100.0 °C |
Elastic modulus of 190 - 194 GPa |
| - |
200.0 °C |
Elastic modulus of 182 - 186 GPa |
| - |
300.0 °C |
Elastic modulus of 174 - 179 GPa |
| - |
400.0 °C |
Elastic modulus of 166 - 172 GPa |
| - |
500.0 °C |
Elastic modulus of 158 - 165 GPa |
| - |
600.0 °C |
Elastic modulus of 150 GPa |
| - |
700.0 °C |
Elastic modulus of 142 GPa |
| - |
800.0 °C |
Elastic modulus of 134 GPa |
| Elongation |
20.0 °C |
Elongation of 35 % |
| Elongation A80, transverse |
20.0 °C |
Elongation A80, transverse of 35 - 40 % |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 30 - 40 % |
| Hardness, Brinell |
20.0 °C |
Hardness, Brinell of 250 [-] |
| Hardness, Brinell, trans |
20.0 °C |
Hardness, Brinell, trans of 250 [-] |
| Poisson's ratio |
20.0 °C |
Poisson's ratio of 0.28 [-] |
| Shear modulus |
20.0 °C |
Shear modulus of 77.3 GPa |
| Tensile strength |
20.0 °C |
Tensile strength of 580 - 800 MPa |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 580 - 800 MPa |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 280 MPa |
| - |
100.0 °C |
Yield strength Rp0.2 of 225 MPa |
| - |
150.0 °C |
Yield strength Rp0.2 of 200 MPa |
| - |
200.0 °C |
Yield strength Rp0.2 of 185 MPa |
| - |
250.0 °C |
Yield strength Rp0.2 of 175 MPa |
| - |
300.0 °C |
Yield strength Rp0.2 of 165 MPa |
| - |
350.0 °C |
Yield strength Rp0.2 of 155 MPa |
| - |
400.0 °C |
Yield strength Rp0.2 of 150 MPa |
| Yield strength Rp0.2, transverse |
20.0 °C |
Yield strength Rp0.2, transverse of 270 - 290 MPa |
| Yield strength Rp1.0 |
20.0 °C |
Yield strength Rp1.0 of 315 MPa |
| - |
100.0 °C |
Yield strength Rp1.0 of 255 MPa |
| - |
150.0 °C |
Yield strength Rp1.0 of 230 MPa |
| - |
200.0 °C |
Yield strength Rp1.0 of 210 MPa |
| - |
250.0 °C |
Yield strength Rp1.0 of 200 MPa |
| - |
300.0 °C |
Yield strength Rp1.0 of 190 MPa |
| - |
350.0 °C |
Yield strength Rp1.0 of 180 MPa |
| - |
400.0 °C |
Yield strength Rp1.0 of 175 MPa |
| Yield strength Rp1.0, transverse |
20.0 °C |
Yield strength Rp1.0, transverse of 310 - 320 MPa |
Trust our high-quality steel to forge a brighter and stronger future for your projects.
-- Our promise
Similar or equivalent steel materials
Get a quote