DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q)
DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q) introduction
Properties:
- high resistance to pitting corrosion and intergranular corrosion (better than 1.4436)
- resistant to crack corrosion, with highest general resistance to many organic acids of high concentration and temperature, e.g. in not oxidizing acids and chloride containing media (sea water), also in inorganic and mixing acids
- application temperature: -200 to 550 °C
Application:
- in reactor industry, marine engineering, chemical industry
- for construction of pressure tanks suitably
Equivalent material: SFS X2CrNiMo17-14-5, AFNOR Z2CNDU17-16, BS 317S16, ÖNORM X2CrNiMoN17-13-5KW, ASTM 317LNM, DIN 1.4439, DIN G-X3CrNiMoN17-13-5, AFNOR Z3CND18-14-05Az, UNE F.3544, AISI 317LMN, SAE 317LMN, JIS SUS317J1, EN X2CrNiMoN17-13-5, EN 1.4439, ASTM 317LMN, ASTM Grade F48, UNS S31726
DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 8.01 - 8.02 g/cm³ |
DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | -100.0 °C | Coefficient of thermal expansion of 1.49E-5 1/K | - |
| - | 20.0 °C | Coefficient of thermal expansion of 1.61E-5 1/K | - |
| - | 100.0 °C | Coefficient of thermal expansion of 1.65E-5 - 1.67E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.72E-5 - 1.75E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.75E-5 - 1.77E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.81E-5 - 1.85E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.84E-5 - 1.85E-5 1/K | - |
| - | 600.0 °C | Coefficient of thermal expansion of 1.88E-5 1/K | - |
| - | 700.0 °C | Coefficient of thermal expansion of 1.91E-5 1/K | - |
| - | 800.0 °C | Coefficient of thermal expansion of 1.94E-5 1/K | - |
| - | 900.0 °C | Coefficient of thermal expansion of 1.97E-5 1/K | - |
| - | 1000.0 °C | Coefficient of thermal expansion of 2E-5 1/K | - |
| Max service temperature, long | - | Max service temperature, long of -200 - 550 °C | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | -100.0 °C | Specific heat capacity of 440 J/(kg·K) | - |
| - | 20.0 °C | Specific heat capacity of 472 - 500 J/(kg·K) | - |
| - | 100.0 °C | Specific heat capacity of 487 J/(kg·K) | - |
| - | 200.0 °C | Specific heat capacity of 503 J/(kg·K) | - |
| - | 300.0 °C | Specific heat capacity of 512 J/(kg·K) | - |
| - | 400.0 °C | Specific heat capacity of 520 J/(kg·K) | - |
| - | 500.0 °C | Specific heat capacity of 530 J/(kg·K) | - |
| - | 600.0 °C | Specific heat capacity of 541 J/(kg·K) | - |
| - | 700.0 °C | Specific heat capacity of 551 J/(kg·K) | - |
| - | 800.0 °C | Specific heat capacity of 559 J/(kg·K) | - |
| - | 900.0 °C | Specific heat capacity of 565 J/(kg·K) | - |
| - | 1000.0 °C | Specific heat capacity of 571 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 13.5 - 14 W/(m·K) | - |
| - | 100.0 °C | Thermal conductivity of 14.9 W/(m·K) | - |
| - | 200.0 °C | Thermal conductivity of 16.7 W/(m·K) | - |
| - | 300.0 °C | Thermal conductivity of 18.3 W/(m·K) | - |
| - | 400.0 °C | Thermal conductivity of 19.8 W/(m·K) | - |
| - | 500.0 °C | Thermal conductivity of 21.3 W/(m·K) | - |
| - | 600.0 °C | Thermal conductivity of 22.7 W/(m·K) | - |
| - | 700.0 °C | Thermal conductivity of 24.2 W/(m·K) | - |
| - | 800.0 °C | Thermal conductivity of 25.6 W/(m·K) | - |
| Thermal diffusivity | 20.0 °C | Thermal diffusivity of 3.6 mm²/s | - |
| - | 100.0 °C | Thermal diffusivity of 3.7 mm²/s | - |
| - | 200.0 °C | Thermal diffusivity of 4 mm²/s | - |
| - | 300.0 °C | Thermal diffusivity of 4.4 mm²/s | - |
| - | 400.0 °C | Thermal diffusivity of 4.6 mm²/s | - |
| - | 500.0 °C | Thermal diffusivity of 4.7 mm²/s | - |
| - | 600.0 °C | Thermal diffusivity of 4.9 mm²/s | - |
| - | 700.0 °C | Thermal diffusivity of 5.2 mm²/s | - |
| - | 800.0 °C | Thermal diffusivity of 5.5 mm²/s | - |
DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.03 % |
| Chromium | Chromium of 16.5 - 18.5 % |
| Manganese | Manganese of 2 % |
| Molybdenum | Molybdenum of 4 - 5 % |
| Nickel | Nickel of 12.5 - 14.5 % |
| Nitrogen | Nitrogen of 0.12 - 0.22 % |
| Phosphorus | Phosphorus of 0.05 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.015 - 0.025 % |
DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | 20.0 °C | Electrical resistivity of 7.75E-7 - 8.5E-7 Ω·m |
| - | 100.0 °C | Electrical resistivity of 8.42E-7 Ω·m |
| - | 200.0 °C | Electrical resistivity of 9.04E-7 Ω·m |
| - | 300.0 °C | Electrical resistivity of 9.62E-7 Ω·m |
| - | 400.0 °C | Electrical resistivity of 1.01E-6 Ω·m |
| - | 500.0 °C | Electrical resistivity of 1.06E-6 Ω·m |
| - | 600.0 °C | Electrical resistivity of 1.1E-6 Ω·m |
| - | 700.0 °C | Electrical resistivity of 1.13E-6 Ω·m |
| - | 800.0 °C | Electrical resistivity of 1.16E-6 Ω·m |
DIN 17440 Grade X2CrNiMoN17-13-5 quenched (+Q) mechanical
| Property | Temperature | Value |
|---|---|---|
| Elastic modulus | -100.0 °C | Elastic modulus of 206 GPa |
| - | 20.0 °C | Elastic modulus of 196 - 200 GPa |
| - | 100.0 °C | Elastic modulus of 190 - 194 GPa |
| - | 200.0 °C | Elastic modulus of 182 - 186 GPa |
| - | 300.0 °C | Elastic modulus of 174 - 179 GPa |
| - | 400.0 °C | Elastic modulus of 166 - 172 GPa |
| - | 500.0 °C | Elastic modulus of 158 - 165 GPa |
| - | 600.0 °C | Elastic modulus of 150 GPa |
| - | 700.0 °C | Elastic modulus of 142 GPa |
| - | 800.0 °C | Elastic modulus of 134 GPa |
| Elongation | 20.0 °C | Elongation of 35 % |
| Elongation A80 | 20.0 °C | Elongation A80 of 35 % |
| Elongation A80, transverse | 20.0 °C | Elongation A80, transverse of 40 % |
| Elongation, transverse | 20.0 °C | Elongation, transverse of 30 - 40 % |
| Poisson's ratio | 20.0 °C | Poisson's ratio of 0.28 [-] |
| Shear modulus | 20.0 °C | Shear modulus of 77.3 GPa |
| Tensile strength | 20.0 °C | Tensile strength of 580 - 800 MPa |
| Tensile strength, transverse | 20.0 °C | Tensile strength, transverse of 580 - 800 MPa |
| Yield strength Rp0.2 | 20.0 °C | Yield strength Rp0.2 of 285 MPa |
| - | 50.0 °C | Yield strength Rp0.2 of 260 MPa |
| - | 100.0 °C | Yield strength Rp0.2 of 225 MPa |
| - | 150.0 °C | Yield strength Rp0.2 of 200 MPa |
| - | 200.0 °C | Yield strength Rp0.2 of 185 MPa |
| - | 250.0 °C | Yield strength Rp0.2 of 175 MPa |
| - | 300.0 °C | Yield strength Rp0.2 of 165 MPa |
| - | 350.0 °C | Yield strength Rp0.2 of 155 MPa |
| - | 400.0 °C | Yield strength Rp0.2 of 150 MPa |
| Yield strength Rp0.2, transverse | 20.0 °C | Yield strength Rp0.2, transverse of 285 MPa |
| Yield strength Rp1.0 | 20.0 °C | Yield strength Rp1.0 of 315 MPa |
| - | 50.0 °C | Yield strength Rp1.0 of 290 MPa |
| - | 100.0 °C | Yield strength Rp1.0 of 255 MPa |
| - | 150.0 °C | Yield strength Rp1.0 of 230 MPa |
| - | 200.0 °C | Yield strength Rp1.0 of 210 MPa |
| - | 250.0 °C | Yield strength Rp1.0 of 200 MPa |
| - | 300.0 °C | Yield strength Rp1.0 of 190 MPa |
| - | 350.0 °C | Yield strength Rp1.0 of 180 MPa |
| - | 400.0 °C | Yield strength Rp1.0 of 175 MPa |
| Yield strength Rp1.0, transverse | 20.0 °C | Yield strength Rp1.0, transverse of 315 MPa |
Choose our long-lasting steel products for enduring performance and reliability.
-- Our promise
Similar or equivalent steel materials
- EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT)
- DIN 17440 Grade X2CrNiMoN17-13-5 solution heat-treated and quenched
- EN 10272 Grade X2CrNiMoN17-13-5 solution annealed (+AT)
- EN 10028-7 Grade X2CrNiMoN17-13-5 solution annealed (+AT)
- EN 10216-5 Grade X2CrNiMoN17-13-5 solution annealed (+AT)
- EN 10217-7 Grade X2CrNiMoN17-13-5 solution annealed (+AT)
- ASTM A182 Grade F48 Solution-Annealed
- DIN 17445 Grade G-X3CrNiMoN17-13-5 quenched (+Q)
- JIS G4303 Grade SUS317 solution treated
- JIS G4303 Grade SUS317J1 solution treated
Get a quote