EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650)
EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650) introduction
Material X12CrS13 is comparable to X 12 CrS 13 acc. to Key to Steel 1995 resp. steel-iron-list 1994. This material is a martensitic free cutting steel showing favorable machinability but lower ductility and corrosion resistance than the usual 13 per cent Cr-steels. Application for all kinds of turning workpieces, such as screws, nuts, bolts as well as for construction parts in water and steam.
Welding is not common.
No forming is designated.
Equivalent material: GB Y12Cr13, GB S41617, ISO X12CrS13, ISO 4005-416-00-I, JIS SUS416, KS STS416, UNS S41600, ASTM 416, AISI 416, ISO MP13C, ASTM A895Type416, ASTM A959UNSS41600, AISI Type416, DIN 1.4005, DIN X12CrS13, AFNOR Z11CF13, AFNOR X12CrS13, BS 416S21, BS X12CrS13, AISI 51416, AISI S41600, SAE 51416, SAE 416, SAE S41600, EN 1.4005, GB Y1Cr13, ASTM Grade 6F (416)
EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.7 g/cm³ |
EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.1E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.15E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.2E-5 1/K |
- |
| Melting point |
- |
Melting point of 1370 - 1530 °C |
Typical for Martensitic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 460 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 30 W/(m·K) |
- |
EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650) chemical
| Property |
Value |
| Carbon |
Carbon of 0.08 - 0.15 % |
| Chromium |
Chromium of 12 - 14 % |
| Manganese |
Manganese of 1.5 % |
| Molybdenum |
Molybdenum of 0.6 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.15 - 0.35 % |
EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 6E-7 Ω·m |
EN 10088-1 Grade X12CrS13 quenched and tempered (+QT650) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 215 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 212 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 205 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 200 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 190 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 8 - 12 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Martensitic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Martensitic Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 650 - 1000 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 450 - 550 MPa |
- |
We are committed to your success, providing reliable steel solutions that exceed expectations.
-- Our promise
Similar or equivalent steel materials
Get a quote