EN 10028-3 Grade P275NH normalized or normalized formed (+N)

Home
Material
EN 10028-3 Grade P275NH normalized or normalized formed (+N)

EN 10028-3 Grade P275NH normalized or normalized formed (+N)

EN 10028-3 Grade P275NH normalized or normalized formed (+N) introduction

Heat-resistant weldable fine grain steel for application in steam boiler and pressure vessel construction.
Max. application temperature: approx. 400 °C

Equivalent material: IS 2002 Grade 2, ASTM A516 Grade 60, ASTM A516 Grade 65, ASTM A662 Grade A, UNS K02100, UNS K02403, UNS K01701, DIN P275NH, AFNOR A42FP, BS 43C, ASTM Grade A, DIN WStE285, AS PT430N, AS PT460N, IS P275NH, DIN 1.0487, EN 1.0487, DIN WStE 285, AFNOR P275NH, UNI FeE285 KW, AISI 290A, BS 224-400B, BS P275NH, SAE 290A, ISO P275NH, ASTM Grade 60

EN 10028-3 Grade P275NH normalized or normalized formed (+N) general

Property	Temperature	Value	Condition	Related Standards	Shape
Density	20 °C	Density of 7.84 g/cm³	normalized or normalized formed (+N)	EN 10028-3	Flat
-	20 °C	Density of 7.84 - 7.85 g/cm³	normalized or normalized formed (+N)	EN 10028-3	Flat
-	20 °C	Density of 7.85 g/cm³	normalized or normalized formed (+N)	EN 10028-3	Flat

EN 10028-3 Grade P275NH normalized or normalized formed (+N) thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	-100 °C	Coefficient of thermal expansion of 1.08e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Coefficient of thermal expansion of 1.19e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	100 °C	Coefficient of thermal expansion of 1.25e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	200 °C	Coefficient of thermal expansion of 1.3e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	300 °C	Coefficient of thermal expansion of 1.36e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	400 °C	Coefficient of thermal expansion of 1.41e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	500 °C	Coefficient of thermal expansion of 1.45e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	600 °C	Coefficient of thermal expansion of 1.49e-05 1/K	normalized or normalized formed (+N)	EN 10028-3	Flat	-
Max service temperature	-	Max service temperature of -20 - 400 °C	normalized or normalized formed (+N)	EN 10028-3	Flat	Long
-	-	Max service temperature of 400 °C	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet	Long
-	-	Max service temperature of 500 °C	-	-	-	Typical for Carbon Steel
Melting point	-	Melting point of 1480 - 1526 °C	-	-	-	Typical for Low Carbon Steel
Specific heat capacity	-100 °C	Specific heat capacity of 423 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Specific heat capacity of 430 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Specific heat capacity of 430 - 461 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Specific heat capacity of 461 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	100 °C	Specific heat capacity of 479 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	200 °C	Specific heat capacity of 499 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	300 °C	Specific heat capacity of 517 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	400 °C	Specific heat capacity of 536 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	500 °C	Specific heat capacity of 558 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	600 °C	Specific heat capacity of 587 J/(kg·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
Thermal conductivity	-100 °C	Thermal conductivity of 52.6 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Thermal conductivity of 53.4 - 54 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Thermal conductivity of 53.4 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Thermal conductivity of 54 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	100 °C	Thermal conductivity of 53.3 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	200 °C	Thermal conductivity of 50.1 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	300 °C	Thermal conductivity of 46.9 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	400 °C	Thermal conductivity of 43.2 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	500 °C	Thermal conductivity of 39.5 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	600 °C	Thermal conductivity of 36.1 W/(m·K)	normalized or normalized formed (+N)	EN 10028-3	Flat	-
Thermal diffusivity	-100 °C	Thermal diffusivity of 18 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Thermal diffusivity of 14.8 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	100 °C	Thermal diffusivity of 13.7 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	200 °C	Thermal diffusivity of 12.1 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	300 °C	Thermal diffusivity of 10.6 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	400 °C	Thermal diffusivity of 9.2 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	500 °C	Thermal diffusivity of 7.6 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	600 °C	Thermal diffusivity of 6.1 mm²/s	normalized or normalized formed (+N)	EN 10028-3	Flat	-

EN 10028-3 Grade P275NH normalized or normalized formed (+N) chemical

Property	Value	Condition	Related Standards	Shape
Aluminium	Aluminium of 0.02 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Carbon	Carbon of 0.16 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Chromium	Chromium of 0.3 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Copper	Copper of 0.3 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Manganese	Manganese of 0.8 - 1.5 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Molybdenum	Molybdenum of 0.08 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Nickel	Nickel of 0.5 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Niobium	Niobium of 0.05 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Nitrogen	Nitrogen of 0.012 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Phosphorus	Phosphorus of 0.025 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Silicon	Silicon of 0.4 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Sulfur	Sulfur of 0.01 %	normalized or normalized formed (+N)	EN 10028-3	Flat
-	Sulfur of 0.015 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Titanium	Titanium of 0.03 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet
Vanadium	Vanadium of 0.05 %	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet

EN 10028-3 Grade P275NH normalized or normalized formed (+N) magnetic

Property	Value	Comment
Curie temperature	Curie temperature of 770 °C	Typical for Low Carbon Steel

EN 10028-3 Grade P275NH normalized or normalized formed (+N) electrical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Electrical conductivity	-	Electrical conductivity of 5 S/m	-	-	-	Predicted Value
Electrical resistivity	-100 °C	Electrical resistivity of 1.3e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Electrical resistivity of 1.95e-07 - 2e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Electrical resistivity of 1.95e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Electrical resistivity of 2e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	100 °C	Electrical resistivity of 2.4e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	200 °C	Electrical resistivity of 3.15e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	300 °C	Electrical resistivity of 4e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	400 °C	Electrical resistivity of 5.03e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	500 °C	Electrical resistivity of 6.26e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	600 °C	Electrical resistivity of 7.68e-07 Ω·m	normalized or normalized formed (+N)	EN 10028-3	Flat	-

EN 10028-3 Grade P275NH normalized or normalized formed (+N) mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus	-100 °C	Elastic modulus of 217 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Elastic modulus of 212 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	100 °C	Elastic modulus of 207 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	200 °C	Elastic modulus of 199 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	300 °C	Elastic modulus of 192 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	400 °C	Elastic modulus of 184 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	500 °C	Elastic modulus of 175 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	600 °C	Elastic modulus of 164 GPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
Elongation	-	Elongation of 18.0 %	-	-	-	Predicted Value, A80 Transverse
-	-	Elongation of 18.6 %	-	-	-	Predicted Value, A200
-	-	Elongation of 19.8 %	-	-	-	Predicted Value, A80
-	-	Elongation of 21.2 %	-	-	-	Predicted Value, A5
-	-	Elongation of 22.6 %	-	-	-	Predicted Value, Transverse
-	-	Elongation of 24.9 %	-	-	-	Predicted Value, A50
-	20 °C	Elongation of 22 %	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	-
-	20 °C	Elongation of 23 %	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Elongation of 24 %	normalized or normalized formed (+N)	EN 10028-3	Flat	-
Hardness, Brinell	-	Hardness, Brinell of 241 [-]	-	-	-	Predicted Value, Transverse
Poisson's ratio	-	Poisson's ratio of 0.29 [-]	-	-	-	Typical for Low Carbon Steel
Reduction of area	-	Reduction of area of 41.3 %	-	-	-	Predicted Value
-	-	Reduction of area of 42.7 %	-	-	-	Predicted Value, Transverse
Shear modulus	-	Shear modulus of 82 GPa	-	-	-	Typical for Low Carbon Steel
Shear strength	-	Shear strength of 535.6 MPa	-	-	-	Predicted Value
Tensile strength	20 °C	Tensile strength of 340 - 470 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	-
-	20 °C	Tensile strength of 350 - 510 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 350 - 490 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 350 - 480 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 350 - 470 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 360 - 510 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 360 - 490 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 360 - 480 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 360 - 470 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 370 - 510 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 370 - 490 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 370 - 480 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 370 - 470 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 390 - 510 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 390 - 490 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 390 - 480 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Tensile strength of 390 - 470 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
Yield strength	-	Yield strength of 258 MPa	-	-	-	Predicted Value, RP1
-	-	Yield strength of 315.3 MPa	-	-	-	Predicted Value, RP1 Transverse
-	-	Yield strength of 326.9 MPa	-	-	-	Predicted Value, Transverse
-	-	Yield strength of 395.2 MPa	-	-	-	Predicted Value, RP05
-	-	Yield strength of 451.4 MPa	-	-	-	Predicted Value, RP02 Transverse
-	-	Yield strength of 461.3 MPa	-	-	-	Predicted Value, RP002
-	20 °C	Yield strength of 215 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	-
-	20 °C	Yield strength of 225 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Yield strength of 235 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Yield strength of 255 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Yield strength of 265 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	20 °C	Yield strength of 275 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	-
-	50 °C	Yield strength of 205 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet	RP02
-	50 °C	Yield strength of 208 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	50 °C	Yield strength of 218 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	50 °C	Yield strength of 227 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	50 °C	Yield strength of 247 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	50 °C	Yield strength of 256 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	50 °C	Yield strength of 266 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	100 °C	Yield strength of 196 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet	RP02
-	100 °C	Yield strength of 205 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet	RP02
-	100 °C	Yield strength of 214 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	100 °C	Yield strength of 232 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	100 °C	Yield strength of 241 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	100 °C	Yield strength of 250 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	150 °C	Yield strength of 176 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	RP02
-	150 °C	Yield strength of 181 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	150 °C	Yield strength of 190 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	150 °C	Yield strength of 198 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	150 °C	Yield strength of 215 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	150 °C	Yield strength of 223 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	150 °C	Yield strength of 232 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	200 °C	Yield strength of 157 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	RP02
-	200 °C	Yield strength of 167 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	200 °C	Yield strength of 174 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	200 °C	Yield strength of 182 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	200 °C	Yield strength of 197 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	200 °C	Yield strength of 205 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat, Sheet	RP02
-	200 °C	Yield strength of 213 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	250 °C	Yield strength of 137 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	RP02
-	250 °C	Yield strength of 153 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	250 °C	Yield strength of 160 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	250 °C	Yield strength of 167 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	250 °C	Yield strength of 181 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	250 °C	Yield strength of 188 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	250 °C	Yield strength of 195 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	300 °C	Yield strength of 108 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	RP02
-	300 °C	Yield strength of 140 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	300 °C	Yield strength of 147 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	300 °C	Yield strength of 153 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	300 °C	Yield strength of 166 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	300 °C	Yield strength of 173 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	300 °C	Yield strength of 179 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	350 °C	Yield strength of 88 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	RP02
-	350 °C	Yield strength of 130 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	350 °C	Yield strength of 136 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	350 °C	Yield strength of 142 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	350 °C	Yield strength of 154 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	350 °C	Yield strength of 160 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	350 °C	Yield strength of 166 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	400 °C	Yield strength of 68 MPa	normalized or normalized formed (+N)	EN 10028-3	Sheet, Flat	RP02
-	400 °C	Yield strength of 122 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	400 °C	Yield strength of 128 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	400 °C	Yield strength of 133 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	400 °C	Yield strength of 145 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	400 °C	Yield strength of 150 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02
-	400 °C	Yield strength of 156 MPa	normalized or normalized formed (+N)	EN 10028-3	Flat	RP02

Partner with us to build a solid foundation for success, backed by our expertise in supplying high-quality steel materials.

-- Our promise

Similar or equivalent steel materials

Get a quote