EN 10025-5 Grade S355J2G2W as-rolled condition (+AR)

EN 10025-5 Grade S355J2G2W as-rolled condition (+AR) introduction

The material S355J2G2W with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding.
The atmospheric load have to consider (SEW 087, Guideline 007 of the Deutscher Ausschuss für Stahlbau and paragraph 2.5 of TA-Luft 1986).
The unhindered generation of the conversion coating have to be considered in the construction and building process.
The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated.
Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge.
With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible.
The recommendation of the EURONORM Information No. 2 (EN 1011) have to considered.
Application limit: An notch impact energy of 27 J at -20 deg. is guaranteed.

Equivalent material: DIN 1.8965, DIN S355J2G2W, DIN WTSt 52-3, DIN S355J2W, BS S355J2W, JIS SMA50CP, JIS SMA490CP, JIS SMA400BP, EN 1.8965, ISO S355WD, ASTM Type IV Grade II, ASTM Grade 345W Type A, ASTM Grade 345W Type B, ASTM Type IV