EN 10025-5 Grade S355J0W normalized or normalized formed (+N)
  • Home
  • Material
  • EN 10025-5 Grade S355J0W normalized or normalized formed (+N)

EN 10025-5 Grade S355J0W normalized or normalized formed (+N)

EN 10025-5 Grade S355J0W normalized or normalized formed (+N) introduction

The weather resistant steel S355J2WP with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding.
The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated.
Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge.
With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible.
The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Equivalent material: GB Q355NH, GB L53550, IS S355WC, IS SMA490, ASTM A588 Grade A, ASTM A588 Grade B, ASTM A588 Grade C, ASTM A588 Grade D, ASTM A588 Grade K, UNS K11430, UNS K12043, UNS K11538, DIN 1.8959, EN 1.8959, DIN S355J0W, AFNOR E36WB3, BS WR50B, BS S355J0W, JIS SMA400AP, JIS SMA400BP, JIS SMA400CP, JIS SMA41AP, JIS SMA41BP, JIS SMA41CP, JIS SMA50AW, ISO S355WC, ISO FeE500, ASTM Grade I B, ASTM Grade Ib

EN 10025-5 Grade S355J0W normalized or normalized formed (+N) general

Property Value Comment
Density Density of 7.8 g/cm³ Typical for Steel

EN 10025-5 Grade S355J0W normalized or normalized formed (+N) chemical

Property Value Condition Related Standards Shape
Carbon Carbon of 0.16 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Chromium Chromium of 0.4 - 0.8 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Copper Copper of 0.25 - 0.55 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Manganese Manganese of 0.5 - 1.5 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire
- Manganese of 0.5 - 1 % normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat
Molybdenum Molybdenum of 0.3 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Nickel Nickel of 0.65 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Nitrogen Nitrogen of 0.009 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Phosphorus Phosphorus of 0.035 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire
- Phosphorus of 0.04 % normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat
Silicon Silicon of 0.5 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Sulfur Sulfur of 0.035 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire
- Sulfur of 0.04 % normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat
Zirconium Zirconium of 0.15 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar

EN 10025-5 Grade S355J0W normalized or normalized formed (+N) mechanical

Property Temperature Value Condition Related Standards Shape Comment
Elastic modulus - Elastic modulus of 190 - 210 GPa - - - Typical for Steel
Elongation - Elongation of 17.4 % - - - Predicted Value, A200
- - Elongation of 21.8 % - - - Predicted Value, A5
- - Elongation of 23.1 % - - - Predicted Value, A50
- 20 °C Elongation of 14 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 15 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 16 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 16 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 17 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 19 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 20 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 20 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 21 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 22 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire -
Poisson's ratio - Poisson's ratio of 0.3 [-] - - - Typical for Steel
Tensile strength 20 °C Tensile strength of 450 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 450 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 450 - 600 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 450 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 450 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 450 - 600 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 470 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 470 - 600 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 470 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 600 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 490 - 680 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
- 20 °C Tensile strength of 490 - 630 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
- 20 °C Tensile strength of 510 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 510 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 510 - 600 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 510 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Tensile strength of 510 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Tensile strength of 510 - 600 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
Yield strength - Yield strength of 261 MPa - - - Predicted Value, RP1
- - Yield strength of 286.6 MPa - - - Predicted Value, RP1 Transverse
- - Yield strength of 390 MPa - - - Predicted Value, RP02
- - Yield strength of 401.5 MPa - - - Predicted Value, RP05
- - Yield strength of 406.7 MPa - - - Predicted Value, RP02 Transverse
- - Yield strength of 468.6 MPa - - - Predicted Value, RP002
- 20 °C Yield strength of 295 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 295 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 315 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 315 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 325 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 325 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 335 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 335 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 345 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 345 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 355 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 355 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -

Simplify your procurement process with our comprehensive range of steel products.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories