EN 10025-5 Grade S355K2G1W as-rolled condition (+AR)

EN 10025-5 Grade S355K2G1W as-rolled condition (+AR) introduction

The material S355K2G1W with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding.
The atmospheric load have to consider (SEW 087, Guideline 007 of the Deutscher Ausschuss für Stahlbau and paragraph 2.5 of TA-Luft 1986).
The unhindered generation of the conversion coating have to be considered in the construction and building process.
The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated.
Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge.
With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible.
The recommendation of the EURONORM Information No. 2 (EN 1011) have to considered.
Application limit: An notch impact energy of 40 J at -20 deg. is guaranteed.

Equivalent material: DIN 1.8966, DIN S355K2G1W, DIN S355K2W, JIS SMA50CW, JIS SMA490CW, EN 1.8966, ASTM Type IV Grade II, ASTM Type IV