DIN 17182 Grade GS-20Mn5 normalized or normalized formed (+N)
DIN 17182 Grade GS-20Mn5 normalized or normalized formed (+N) introduction
In comparison to the unalloyed cast steel grades according to DIN 1681, the materials of this group show distinctly higher values of the notch impact energy. As a result of their low carbon content (0.23 per cent maximum), they are well suitable for welding. By liquid quenching and tempering, the connection of this material to the micro-alloyed fine-grain structural steels, which this cast steel grade is to be used together with in welded composite constructions, can be achieved for wall thicknesses of up to 40 mm.
Equivalent material: DIN G20Mn5, DIN G19Mn5, DIN 1.6220, EN G20Mn5, EN 1.6220, UNS J02505, DIN 1.1120, JIS SCW480, EN 1.1120
DIN 17182 Grade GS-20Mn5 normalized or normalized formed (+N) general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 8.8 g/cm³ |
Typical for Nickel Steel |
DIN 17182 Grade GS-20Mn5 normalized or normalized formed (+N) thermal
| Property |
Temperature |
Value |
Comment |
| Max service temperature, long |
- |
Max service temperature, long of 0 - 300 °C |
- |
| Melting point |
- |
Melting point of 1316 - 1595 °C |
Typical for Nickel Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 456 J/(kg·K) |
Typical for Nickel Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 10 - 50 W/(m·K) |
Typical for Nickel Steel |
DIN 17182 Grade GS-20Mn5 normalized or normalized formed (+N) chemical
| Property |
Value |
| Carbon |
Carbon of 0.17 - 0.23 % |
| Chromium |
Chromium of 0.3 % |
| Manganese |
Manganese of 1 - 1.5 % |
| Molybdenum |
Molybdenum of 0.15 % |
| Nickel |
Nickel of 0.4 % |
| Phosphorus |
Phosphorus of 0.02 % |
| Silicon |
Silicon of 0.6 % |
| Sulfur |
Sulfur of 0.015 % |
DIN 17182 Grade GS-20Mn5 normalized or normalized formed (+N) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 200 - 215 GPa |
Typical for Nickel Steel |
| Elongation |
20.0 °C |
Elongation of 20 - 22 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Nickel Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 76 GPa |
Typical for Nickel Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 450 - 650 MPa |
- |
| Yield strength |
20.0 °C |
Yield strength of 240 - 300 MPa |
- |
We set new standards in steel manufacturing, pushing boundaries to deliver exceptional quality.
-- Our promise
Similar or equivalent steel materials
Get a quote