DIN 17125 Grade TStE 285 normalized or normalized formed (+N)
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) introduction
The fine grained steel is used acc. DIN 17178 : 1986-5 for welded steel tubes and acc. DIN 17179 : 1986-5 as seamless steel tubes for special purposes from -50 to 400 degrees C.
Application:
pressure vessel construction, apparatus construction, pipelines, mechanical engineering, toolbuilding
Special requirements regarding processing have to be arranged (e.g. coatings). For welded tubes the calculation with the 100 % loads are possible for the seam area.
Equivalent material: DIN 1.0491, DIN S275NL, AFNOR S275NL, BS S275NL, BS 40EE, EN S275NL, EN 1.0491, ISO S275NE, GB Q275FT, GB U32752, GB U32753, UNS K01802, DIN 1.0488, DIN TStE285, DIN P275NL1, AFNOR A42FP, AFNOR P275NL1, BS 224-400A, BS P275NL1, AISI 290A, SAE 290A, JIS SLA235A, JIS SLA235B, JIS STK400, EN P275NL1, EN TStE285, EN 1.0488, ISO P275NL1, ASTM Grade A
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.85 g/cm³ |
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
-100.0 °C |
Coefficient of thermal expansion of 1.08E-5 1/K |
- |
| - |
20.0 °C |
Coefficient of thermal expansion of 1.19E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.25E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.3E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.36E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.41E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.45E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.49E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Max service temperature, long |
- |
Max service temperature, long of -50 - 400 °C |
- |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
-100.0 °C |
Specific heat capacity of 423 J/(kg·K) |
- |
| - |
20.0 °C |
Specific heat capacity of 461 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 479 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 499 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 517 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 536 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 558 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 587 J/(kg·K) |
- |
| Thermal conductivity |
-100.0 °C |
Thermal conductivity of 52.6 W/(m·K) |
- |
| - |
20.0 °C |
Thermal conductivity of 53.4 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 53.3 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 50.1 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 46.9 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 43.2 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 39.5 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 36.1 W/(m·K) |
- |
| Thermal diffusivity |
-100.0 °C |
Thermal diffusivity of 18 mm²/s |
- |
| - |
20.0 °C |
Thermal diffusivity of 14.8 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 13.7 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 12.1 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 10.6 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 9.2 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 7.6 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 6.1 mm²/s |
- |
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) chemical
| Property |
Value |
| Aluminium |
Aluminium of 0.02 % |
| Carbon |
Carbon of 0.18 % |
| Chromium |
Chromium of 0.3 % |
| Copper |
Copper of 0.2 % |
| Manganese |
Manganese of 0.6 - 1.4 % |
| Molybdenum |
Molybdenum of 0.08 % |
| Nickel |
Nickel of 0.3 % |
| Niobium |
Niobium of 0.03 % |
| Nitrogen |
Nitrogen of 0.02 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 0.4 % |
| Sulfur |
Sulfur of 0.025 % |
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
-100.0 °C |
Electrical resistivity of 1.3E-7 Ω·m |
| - |
20.0 °C |
Electrical resistivity of 1.95E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 2.4E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 3.15E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 4E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 5.03E-7 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 6.26E-7 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 7.68E-7 Ω·m |
DIN 17125 Grade TStE 285 normalized or normalized formed (+N) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
-100.0 °C |
Elastic modulus of 217 GPa |
- |
| - |
20.0 °C |
Elastic modulus of 212 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 207 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 199 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 192 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 184 GPa |
- |
| - |
500.0 °C |
Elastic modulus of 175 GPa |
- |
| - |
600.0 °C |
Elastic modulus of 164 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 24 % |
- |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 22 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 82 GPa |
Typical for Low Carbon Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 390 - 510 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 390 - 510 MPa |
- |
| Yield strength |
20.0 °C |
Yield strength of 255 - 285 MPa |
- |
| Yield strength, transverse |
20.0 °C |
Yield strength, transverse of 255 - 285 MPa |
- |
Join our long list of satisfied customers who trust our legacy of delivering quality steel.
-- Our promise
Similar or equivalent steel materials
Get a quote