BS 4360 Grade 50D
Equivalent material: EN S355N; DIN St 52-3 N, DIN 1.0576, DIN RoSt 52-3, DIN St 52-3 N, DIN S355J2H, AFNOR S355J2H, BS S355J2H, AISI 345A, SAE 345A, EN S355J2H, EN 1.0576, ISO S355J2H, ASTM Grade III, UNS K12709, DIN 1.0577, DIN St 52-3 N, DIN S355J2G4, DIN Fe 510 D2, DIN S355J2, AFNOR S355J2, AFNOR A52FP, BS EN50D, BS S355J2, UNI Fe 510 D, EN S355J2, EN 1.0577, GOST 17G1S, ASTM LF2, UNS K12447
BS 4360 Grade 50D general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
BS 4360 Grade 50D thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K |
Typical for Low Carbon Steel |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 465 J/(kg·K) |
Typical for Low Carbon Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 25 - 93 W/(m·K) |
Typical for Low Carbon Steel |
BS 4360 Grade 50D chemical
| Property |
Value |
| Carbon |
Carbon of 0.18 % |
| Manganese |
Manganese of 1.5 % |
| Niobium |
Niobium of 0 - 0.1 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.1 - 0.5 % |
| Sulfur |
Sulfur of 0.04 % |
| Vanadium |
Vanadium of 0 - 0.1 % |
BS 4360 Grade 50D magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
BS 4360 Grade 50D electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m |
Typical for Carbon Steel |
BS 4360 Grade 50D mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 200 - 215 GPa |
Typical for Low Carbon Steel |
| Elongation |
23.0 °C |
Elongation of 20 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 82 GPa |
Typical for Low Carbon Steel |
| Tensile strength |
23.0 °C |
Tensile strength of 490 - 640 MPa |
- |
| Yield strength |
23.0 °C |
Yield strength of 305 - 355 MPa |
- |
Combine strength and elegance seamlessly with our range of aesthetically pleasing steel products, adding grace to your designs.
-- Our promise
Similar or equivalent steel materials
Get a quote