JIS G4403 Grade SKH10
Equivalent material: DIN S12-1-4-5, BS BT15, UNI HS12-1-5-5, UNE 12-1-5-5 ET15, ASTM T15, AISI T15, GB/T W12Cr4V5Co5, DIN 1.3202, DIN S 12-1-4-5, DIN HS12-1-4-5, AFNOR Z160WKCV12-05-05-04, UNE 12-1-5-5, SAE T15, EN 1.3202, GOST R13F4K5, GB/T T71245, ASTM Type T15, UNS T12015
JIS G4403 Grade SKH10 general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.72 - 8 g/cm³ |
Typical for Tool And Machining Steel |
JIS G4403 Grade SKH10 thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1E-5 - 1.3E-5 1/K |
Typical for Tool And Machining Steel |
| Melting point |
- |
Melting point of 1370 - 1425 °C |
Typical for Tool And Machining Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 420 - 460 J/(kg·K) |
Typical for Tool And Machining Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 17 - 42 W/(m·K) |
Typical for Tool And Machining Steel |
JIS G4403 Grade SKH10 chemical
| Property |
Value |
| Carbon |
Carbon of 1.45 - 1.6 % |
| Chromium |
Chromium of 3.8 - 4.5 % |
| Cobalt |
Cobalt of 4.2 - 5.2 % |
| Copper |
Copper of 0.25 % |
| Iron |
Iron of 68.64 - 74.85 % |
| Manganese |
Manganese of 0.4 % |
| Nickel |
Nickel of 0.25 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 0.4 % |
| Sulfur |
Sulfur of 0.03 % |
| Tungsten |
Tungsten of 11.5 - 13.5 % |
| Vanadium |
Vanadium of 4.2 - 5.2 % |
JIS G4403 Grade SKH10 mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 203 - 211 GPa |
Typical for Tool And Machining Steel |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Tool And Machining Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 79 GPa |
Typical for Tool And Machining Steel |
Increase productivity and maximize results with our efficient steel solutions.
-- Our promise
Similar or equivalent steel materials
Get a quote