ASTM A600 Grade Type T15 Cold Drawn
Equivalent material: DIN 1.3202, DIN S 12-1-4-5, DIN HS12-1-4-5, AFNOR Z160WKCV12-05-05-04, BS BT15, UNI HS12-1-5-5, UNE 12-1-5-5, AISI T15, SAE T15, JIS SKH10, EN 1.3202, GOST R13F4K5, GB/T T71245, GB/T W12Cr4V5Co5, UNS T12015
ASTM A600 Grade Type T15 Cold Drawn general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.72 - 8 g/cm³ |
Typical for Tool And Machining Steel |
ASTM A600 Grade Type T15 Cold Drawn thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1E-5 - 1.3E-5 1/K |
Typical for Tool And Machining Steel |
| Melting point |
- |
Melting point of 1370 - 1425 °C |
Typical for Tool And Machining Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 420 - 460 J/(kg·K) |
Typical for Tool And Machining Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 17 - 42 W/(m·K) |
Typical for Tool And Machining Steel |
ASTM A600 Grade Type T15 Cold Drawn chemical
| Property |
Value |
| Carbon |
Carbon of 1.5 - 1.6 % |
| Chromium |
Chromium of 3.75 - 5 % |
| Cobalt |
Cobalt of 4.75 - 5.25 % |
| Manganese |
Manganese of 0.15 - 0.4 % |
| Molybdenum |
Molybdenum of 1 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 0.15 - 0.4 % |
| Sulfur |
Sulfur of 0.03 % |
| Tungsten |
Tungsten of 11.75 - 13 % |
| Vanadium |
Vanadium of 4.5 - 5.25 % |
ASTM A600 Grade Type T15 Cold Drawn mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 203 - 211 GPa |
Typical for Tool And Machining Steel |
| Hardness, Brinell |
23.0 °C |
Hardness, Brinell of 293 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Tool And Machining Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 79 GPa |
Typical for Tool And Machining Steel |
Our stringent quality control measures guarantee the highest standards of steel.
-- Our promise
Similar or equivalent steel materials
Get a quote