EN 10250-4 Grade X30Cr13 soft annealed (+A)
EN 10250-4 Grade X30Cr13 soft annealed (+A) introduction
Make X30Cr13 is comparable to X 30 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for the production of cutting tools (knife blades, scissors, cutting surgical instruments), bearing balls, wear resistant construction parts for control and pump components, springs, piston rods, screws. Application in tempered condition with honed or polished surface, resistant to water and steam. The corrosion resistance is insufficient in annealed or high annealed condition.
Equivalent material: GB 30Cr13, GB S42030, IS X30Cr13, JIS SUS420J2FB, GOST 30Ch13, GOST 30Х13, ASTM A473Type420, SAE 420, SAE Type420, UNS S42000, DIN 1.4028, DIN X30Cr13, AFNOR Z33C13, BS 420S45, AISI 420F, SAE 420F, JIS SUS420J2, JIS SUS420J2TKA, EN 1.4028, ISO 30Cr13, GB 3Cr13, ASTM 420F
EN 10250-4 Grade X30Cr13 soft annealed (+A) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.7 - 7.71 g/cm³ |
EN 10250-4 Grade X30Cr13 soft annealed (+A) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
20.0 °C |
Coefficient of thermal expansion of 1.02E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.09E-5 - 1.1E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.13E-5 - 1.15E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.16E-5 - 1.2E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.2E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.22E-5 1/K |
- |
| Melting point |
- |
Melting point of 1370 - 1530 °C |
Typical for Martensitic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 439 - 460 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 474 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 498 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 517 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 538 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 564 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 598 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 24.6 - 30 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 24.7 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 25 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 25.5 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 25.8 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 26 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 7.3 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 6.4 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 6.1 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 5.8 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 5.4 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.8 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.1 mm²/s |
- |
EN 10250-4 Grade X30Cr13 soft annealed (+A) chemical
| Property |
Value |
| Carbon |
Carbon of 0.26 - 0.35 % |
| Chromium |
Chromium of 12 - 14 % |
| Manganese |
Manganese of 1.5 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.03 % |
EN 10250-4 Grade X30Cr13 soft annealed (+A) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 5.87E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 6.55E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 7.38E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 8.19E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 8.96E-7 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 9.7E-7 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.04E-6 Ω·m |
EN 10250-4 Grade X30Cr13 soft annealed (+A) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 215 - 222 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 212 - 216 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 205 - 209 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 200 - 201 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 190 - 192 GPa |
- |
| - |
500.0 °C |
Elastic modulus of 183 GPa |
- |
| - |
600.0 °C |
Elastic modulus of 174 GPa |
- |
| Hardness, Brinell |
20.0 °C |
Hardness, Brinell of 245 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Martensitic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Martensitic Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 800 MPa |
- |
Collaborate with us to bring your vision to life using our premium-grade steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote