EN 10217-3 Grade TStE 355 normalized or normalized formed (+N)
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) introduction
The fine grain steel TStE 355 is used for special requirements according to DIN 17178 : 1986-5 for welded steel tubes and according to DIN 17179 : 1986-5 for seamless steel tubes. These steel tubes are used above all in pressure vessel construction, apparatus construction, pipe construction, as well as in general machine and equipment construction. The corresponding rules in the procedure manuals have to be complied with, for example Technische Regeln Druckbehälter (TRB) [Technical Rules for Pressure Vessels], Technische Regeln Dampfkessel (TRD) [Technical Rules for Steam Boilers], specifications sheets of the AG-Druckbehälter [Team for Pressure Vessels] (AD-specifications sheets), Technische Regeln brennbare Flüssigkeiten (TRbB) [Technical Rules for Flammable Liquids], Technische Regeln Druckgase (TRG) [Technical Rules for Pressure Gases], Technische Regeln Gashochdruckleitungen (TRGL) [Technical Rules for high-pressure Pipes for Gases].
Special requirements regarding further processing (for example zinc coating, chromium coating or enamelling) have to be negotiated at the time of ordering. For welded tubes, one can assume a 100% use of the allowed calculated stress of the welding seam.
TStE 355 can be used in temperature range from -50 up to 400 degrees C.
Equivalent material: AFNOR E355FP2, BS 225-490, GOST 10G2S1-8, JIS SLA338, ASTM Y52, DIN P355NL1, DIN 1.0546, DIN S355NL, AFNOR S355NL, AFNOR E355FP, BS S355NL, BS 50EE, EN S355NL, EN 1.0546, ISO S355NE, GB/T L03453, GB/T L03454, GB/T Q345FT, GB/T L13454, GB/T Q345q-D, UNS K02003, UNS K12000, UNS K12037, DIN 1.0566, DIN TStE355, DIN A350LF2, AFNOR P355NL1, AFNOR A510FP1, AFNOR A510FP, BS 225-490 A, BS P355NL1, UNI A510 FP, JIS SLA37, JIS SLA365, JIS STK50, JIS STK51, JIS STK490, JIS STK500, JIS E355E, EN P355NL1, EN 1.0566, ISO E355-E, ISO P355NL1, ISO PT490ML1, ISO PT490ML3, ISO PT490QL2, ISO E355E, GB/T L14204, GB/T Q420q-D, UNS K01600, UNS K02007, UNS K02010, UNS K02302, UNS K02700, UNS K02701, UNS K02803, UNS K03301, UNS K11803, UNS K12609
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.83 g/cm³ |
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
-100.0 °C |
Coefficient of thermal expansion of 1.08E-5 1/K |
- |
| - |
20.0 °C |
Coefficient of thermal expansion of 1.19E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.25E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.3E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.36E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.41E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.45E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.49E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Max service temperature, long |
- |
Max service temperature, long of -50 - 400 °C |
- |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
-100.0 °C |
Specific heat capacity of 423 J/(kg·K) |
- |
| - |
20.0 °C |
Specific heat capacity of 461 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 479 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 499 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 517 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 536 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 558 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 587 J/(kg·K) |
- |
| Thermal conductivity |
-100.0 °C |
Thermal conductivity of 37.6 W/(m·K) |
- |
| - |
20.0 °C |
Thermal conductivity of 42.2 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 43.2 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 42.9 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 41.2 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 39.1 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 36.6 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 34.1 W/(m·K) |
- |
| Thermal diffusivity |
-100.0 °C |
Thermal diffusivity of 12.9 mm²/s |
- |
| - |
20.0 °C |
Thermal diffusivity of 11.7 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 11.2 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 10.3 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 9.4 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 8.3 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 7.1 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 5.7 mm²/s |
- |
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) chemical
| Property |
Value |
| Aluminium |
Aluminium of 0.02 % |
| Carbon |
Carbon of 0.18 % |
| Chromium |
Chromium of 0.3 % |
| Copper |
Copper of 0.2 % |
| Manganese |
Manganese of 0.9 - 1.65 % |
| Molybdenum |
Molybdenum of 0.08 % |
| Nickel |
Nickel of 0.3 % |
| Nitrogen |
Nitrogen of 0.02 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 0.1 - 0.5 % |
| Sulfur |
Sulfur of 0.025 % |
| Vanadium |
Vanadium of 0.1 % |
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
-100.0 °C |
Electrical resistivity of 1.82E-7 Ω·m |
| - |
20.0 °C |
Electrical resistivity of 2.47E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 2.96E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 3.68E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 4.55E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 5.56E-7 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 6.75E-7 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 8.13E-7 Ω·m |
EN 10217-3 Grade TStE 355 normalized or normalized formed (+N) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
-100.0 °C |
Elastic modulus of 217 GPa |
- |
| - |
20.0 °C |
Elastic modulus of 212 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 207 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 199 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 192 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 184 GPa |
- |
| - |
500.0 °C |
Elastic modulus of 175 GPa |
- |
| - |
600.0 °C |
Elastic modulus of 164 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 22 % |
- |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 20 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 82 GPa |
Typical for Low Carbon Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 490 - 630 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 490 - 630 MPa |
- |
| Yield strength |
20.0 °C |
Yield strength of 345 - 355 MPa |
- |
| Yield strength, transverse |
20.0 °C |
Yield strength, transverse of 345 - 355 MPa |
- |
Choose our top-tier steel products to elevate the quality and strength of your structures and equipment.
-- Our promise
Similar or equivalent steel materials
Get a quote