EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT)
EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT) introduction
The heat resistant steel X6CrNiMo17-13-2 (1.4918) is used for pressurised seamless tubes.
Equivalent material: GB 07Cr17Ni12Mo2, GB S31609, JIS 07Cr19Ni9Mo2, IS 07Cr19Ni9Mo2, DIN 1.4918, EN 1.4918
EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 8 g/cm³ |
EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | 100.0 °C | Coefficient of thermal expansion of 1.6E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.65E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.7E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.75E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.8E-5 1/K | - |
| - | 600.0 °C | Coefficient of thermal expansion of 1.85E-5 1/K | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | 20.0 °C | Specific heat capacity of 500 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 15 W/(m·K) | - |
EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.04 - 0.08 % |
| Chromium | Chromium of 16 - 18 % |
| Manganese | Manganese of 2 % |
| Molybdenum | Molybdenum of 2 - 2.5 % |
| Nickel | Nickel of 12 - 14 % |
| Nitrogen | Nitrogen of 0.11 % |
| Phosphorus | Phosphorus of 0.04 % |
| Silicon | Silicon of 0.75 % |
| Sulfur | Sulfur of 0.015 % |
EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | 20.0 °C | Electrical resistivity of 7.5E-7 Ω·m |
EN 10216-5 Grade X6CrNiMo17-13-2 solution annealed (+AT) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 20.0 °C | Elastic modulus of 200 GPa | - |
| - | 100.0 °C | Elastic modulus of 194 GPa | - |
| - | 200.0 °C | Elastic modulus of 186 GPa | - |
| - | 300.0 °C | Elastic modulus of 179 GPa | - |
| - | 400.0 °C | Elastic modulus of 172 GPa | - |
| - | 500.0 °C | Elastic modulus of 165 GPa | - |
| - | 600.0 °C | Elastic modulus of 155 GPa | - |
| Elongation | 20.0 °C | Elongation of 35 % | - |
| Elongation, transverse | 20.0 °C | Elongation, transverse of 30 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Austenitic Stainless Steel |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Austenitic Stainless Steel |
| Yield strength Rp0.2 | 20.0 °C | Yield strength Rp0.2 of 205 MPa | - |
| - | 50.0 °C | Yield strength Rp0.2 of 184 MPa | - |
| - | 100.0 °C | Yield strength Rp0.2 of 177 MPa | - |
| - | 150.0 °C | Yield strength Rp0.2 of 162 MPa | - |
| - | 200.0 °C | Yield strength Rp0.2 of 147 MPa | - |
| - | 250.0 °C | Yield strength Rp0.2 of 137 MPa | - |
| - | 300.0 °C | Yield strength Rp0.2 of 127 MPa | - |
| - | 350.0 °C | Yield strength Rp0.2 of 122 MPa | - |
| - | 400.0 °C | Yield strength Rp0.2 of 118 MPa | - |
| - | 450.0 °C | Yield strength Rp0.2 of 113 MPa | - |
| - | 500.0 °C | Yield strength Rp0.2 of 108 MPa | - |
| - | 550.0 °C | Yield strength Rp0.2 of 103 MPa | - |
| Yield strength Rp0.2, transverse | 20.0 °C | Yield strength Rp0.2, transverse of 205 MPa | - |
| Yield strength Rp1.0 | 20.0 °C | Yield strength Rp1.0 of 245 MPa | - |
| - | 50.0 °C | Yield strength Rp1.0 of 228 MPa | - |
| - | 100.0 °C | Yield strength Rp1.0 of 211 MPa | - |
| - | 150.0 °C | Yield strength Rp1.0 of 194 MPa | - |
| - | 200.0 °C | Yield strength Rp1.0 of 177 MPa | - |
| - | 250.0 °C | Yield strength Rp1.0 of 167 MPa | - |
| - | 300.0 °C | Yield strength Rp1.0 of 157 MPa | - |
| - | 350.0 °C | Yield strength Rp1.0 of 152 MPa | - |
| - | 400.0 °C | Yield strength Rp1.0 of 147 MPa | - |
| - | 450.0 °C | Yield strength Rp1.0 of 142 MPa | - |
| - | 500.0 °C | Yield strength Rp1.0 of 137 MPa | - |
| - | 550.0 °C | Yield strength Rp1.0 of 132 MPa | - |
| Yield strength Rp1.0, transverse | 20.0 °C | Yield strength Rp1.0, transverse of 245 MPa | - |
From automotive to aerospace, our steel materials adapt to diverse industries.
-- Our promise
Similar or equivalent steel materials
- EN 10216-5 Grade X2CrNiMo17-12-2 solution annealed (+AT)
- EN 10216-5 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10216-5 Grade X5CrNiMo17-12-2 solution annealed (+AT)
- EN 10217-7 Grade X2CrNiMo17-12-2 solution annealed (+AT)
- EN 10217-7 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10217-7 Grade X5CrNiMo17-12-2 solution annealed (+AT)
- Sandvik 8R61
Get a quote