EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT)
EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT) introduction
Material GX4CrNi13-4 is used at room temperature and incrased temperatures
Equivalent material: ISO G-X4CrNi13-4, ASTM CA6NM, ASTM CA6NMTypeA, UNS J91540, ASTM A352 Grade CA6NM, ASTM A356 Grade CA6NM, ASTM A487 Grade CA6NM Type A, DIN G-X5CrNi13-4, DIN 1.4317, DIN GX4CrNi13-4, JIS SCS6, EN 1.4317, ASTM E3N
EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.7 g/cm³ |
EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.1E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.2E-5 1/K |
- |
| Melting point |
- |
Melting point of 1370 - 1530 °C |
Typical for Martensitic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 460 J/(kg·K) |
- |
| Thermal conductivity |
50.0 °C |
Thermal conductivity of 26 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 27 W/(m·K) |
- |
EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.06 % |
| Chromium |
Chromium of 12 - 13.5 % |
| Copper |
Copper of 0.3 % |
| Manganese |
Manganese of 1 % |
| Molybdenum |
Molybdenum of 0.7 % |
| Nickel |
Nickel of 3.5 - 5 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.025 % |
| Tin |
Tin of 0.03 % |
| Vanadium |
Vanadium of 0.08 % |
EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT) electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 6E-7 Ω·m |
Typical for Martensitic Stainless Steel |
EN 10213 Grade GX4CrNi13-4 quenched and tempered (+QT) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 220 GPa |
Typical for Martensitic Stainless Steel |
| Elongation |
20.0 °C |
Elongation of 15 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Martensitic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Martensitic Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 760 - 960 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 550 MPa |
- |
| - |
100.0 °C |
Yield strength Rp0.2 of 515 MPa |
- |
| - |
200.0 °C |
Yield strength Rp0.2 of 485 MPa |
- |
| - |
300.0 °C |
Yield strength Rp0.2 of 455 MPa |
- |
| - |
350.0 °C |
Yield strength Rp0.2 of 440 MPa |
- |
Create sustainable legacies with our eco-friendly steel materials and practices.
-- Our promise
Similar or equivalent steel materials
Get a quote