EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT)
EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT) introduction
The austenitic steel X2CrNiMo17-12-3 is applicated in solution annealed condition as cold rolled strip an hot rolled strip and sheet, wire rod and profiles. It shows resistance to intercrystalline corrosion even in sensitized condition.
Equivalent material: IS X02Cr17Ni12Mo2, IS 316L, JIS SUS316L, KS STS316L, ASTM A240Type316L, AISI 316L, ASME SA-240Type316L, SAE 316L, UNS S31603, ASTM 316L, GB 022Cr17Ni12Mo2, GB S31603, ISO X2CrNiMo17-12-3, ISO 4432-316-03-I, DIN 1.4432, AFNOR Z3CND17-12-03, BS 316S13, JIS SUS316LFB, JIS SUSF316L, EN 1.4432, GOST 06Ch17N13M3-WD
EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 8 g/cm³ |
EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | 100.0 °C | Coefficient of thermal expansion of 1.6E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.65E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.7E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.75E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.8E-5 1/K | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | 20.0 °C | Specific heat capacity of 500 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 15 W/(m·K) | - |
EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.03 % |
| Chromium | Chromium of 16.5 - 18.5 % |
| Manganese | Manganese of 2 % |
| Molybdenum | Molybdenum of 2.5 - 3 % |
| Nickel | Nickel of 10.5 - 13 % |
| Nitrogen | Nitrogen of 0.1 - 0.11 % |
| Phosphorus | Phosphorus of 0.05 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.015 % |
EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | 20.0 °C | Electrical resistivity of 7.5E-7 Ω·m |
EN 10028-7 Grade X2CrNiMo17-12-3 solution annealed (+AT) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 20.0 °C | Elastic modulus of 200 GPa | - |
| - | 100.0 °C | Elastic modulus of 194 GPa | - |
| - | 200.0 °C | Elastic modulus of 186 GPa | - |
| - | 300.0 °C | Elastic modulus of 179 GPa | - |
| - | 400.0 °C | Elastic modulus of 172 GPa | - |
| - | 500.0 °C | Elastic modulus of 165 GPa | - |
| Elongation A80, transverse | 20.0 °C | Elongation A80, transverse of 40 - 45 % | - |
| Elongation, transverse | 20.0 °C | Elongation, transverse of 40 - 45 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Austenitic Stainless Steel |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Austenitic Stainless Steel |
| Tensile strength | 20.0 °C | Tensile strength of 520 - 700 MPa | - |
| - | 50.0 °C | Tensile strength of 486 MPa | - |
| - | 100.0 °C | Tensile strength of 430 MPa | - |
| - | 150.0 °C | Tensile strength of 410 MPa | - |
| - | 200.0 °C | Tensile strength of 390 MPa | - |
| - | 250.0 °C | Tensile strength of 385 MPa | - |
| - | 300.0 °C | Tensile strength of 380 MPa | - |
| - | 350.0 °C | Tensile strength of 380 MPa | - |
| - | 400.0 °C | Tensile strength of 380 MPa | - |
| - | 500.0 °C | Tensile strength of 360 MPa | - |
| Tensile strength, transverse | 20.0 °C | Tensile strength, transverse of 520 - 700 MPa | - |
| Yield strength Rp0.2 | 50.0 °C | Yield strength Rp0.2 of 200 MPa | - |
| - | 100.0 °C | Yield strength Rp0.2 of 166 MPa | - |
| - | 150.0 °C | Yield strength Rp0.2 of 152 MPa | - |
| - | 200.0 °C | Yield strength Rp0.2 of 137 MPa | - |
| - | 250.0 °C | Yield strength Rp0.2 of 127 MPa | - |
| - | 300.0 °C | Yield strength Rp0.2 of 118 MPa | - |
| - | 350.0 °C | Yield strength Rp0.2 of 113 MPa | - |
| - | 400.0 °C | Yield strength Rp0.2 of 108 MPa | - |
| - | 450.0 °C | Yield strength Rp0.2 of 103 MPa | - |
| - | 500.0 °C | Yield strength Rp0.2 of 100 MPa | - |
| - | 550.0 °C | Yield strength Rp0.2 of 98 MPa | - |
| Yield strength Rp0.2, transverse | 20.0 °C | Yield strength Rp0.2, transverse of 220 - 240 MPa | - |
| Yield strength Rp1.0 | 50.0 °C | Yield strength Rp1.0 of 237 MPa | - |
| - | 100.0 °C | Yield strength Rp1.0 of 199 MPa | - |
| - | 150.0 °C | Yield strength Rp1.0 of 181 MPa | - |
| - | 200.0 °C | Yield strength Rp1.0 of 167 MPa | - |
| - | 250.0 °C | Yield strength Rp1.0 of 157 MPa | - |
| - | 300.0 °C | Yield strength Rp1.0 of 145 MPa | - |
| - | 350.0 °C | Yield strength Rp1.0 of 139 MPa | - |
| - | 400.0 °C | Yield strength Rp1.0 of 135 MPa | - |
| - | 450.0 °C | Yield strength Rp1.0 of 130 MPa | - |
| - | 500.0 °C | Yield strength Rp1.0 of 128 MPa | - |
| - | 550.0 °C | Yield strength Rp1.0 of 127 MPa | - |
| Yield strength Rp1.0, transverse | 20.0 °C | Yield strength Rp1.0, transverse of 260 - 270 MPa | - |
Choose our top-grade steel products for unparalleled strength and unwavering quality.
-- Our promise
Similar or equivalent steel materials
- EN 10028-7 Grade X2CrNiMo17-12-2 solution annealed (+AT)
- EN 10272 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10088-1 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10088-1 Grade X2CrNiMo17-12-3 solution annealed (+AT)
- EN 10272 Grade X2CrNiMo17-12-3 solution annealed (+AT)
- EN 10028-7 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10250-4 Grade X2CrNiMo17-12-2 solution annealed (+AT)
- EN 10250-4 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10222-5 Grade X2CrNiMo18-14-3 solution annealed (+AT)
- EN 10222-5 Grade X2CrNiMo17-12-3 solution annealed (+AT)
Get a quote