EN 10025-5 Grade S355J0WP normalized or normalized formed (+N)
  • Home
  • Material
  • EN 10025-5 Grade S355J0WP normalized or normalized formed (+N)

EN 10025-5 Grade S355J0WP normalized or normalized formed (+N)

EN 10025-5 Grade S355J0WP normalized or normalized formed (+N) introduction

The weather resistant steel S355J0WP with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding.
The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated.
Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge.
With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible.
The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.
Because of the high amount of P special precautions have to take.

Equivalent material: GB Q355GNH, GB L53551, IS S355WPC, IS SMA490, IS SMA50AW, DIN 1.8962, EN 1.8962, DIN 9CrNiCuP3-2-4, DIN Acor 52 S, DIN 9 CrNiCu P 3 2 4, DIN S355J0WP, EN S355J2WP, BS WR50A, JIS SPA-H, JIS SPA-C

EN 10025-5 Grade S355J0WP normalized or normalized formed (+N) general

Property Value Comment
Density Density of 7.8 g/cm³ Typical for Steel

EN 10025-5 Grade S355J0WP normalized or normalized formed (+N) chemical

Property Value Condition Related Standards Shape
Carbon Carbon of 0.12 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Chromium Chromium of 0.3 - 1.25 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Copper Copper of 0.25 - 0.55 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Manganese Manganese of 1 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Nickel Nickel of 0.65 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Nitrogen Nitrogen of 0.009 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Phosphorus Phosphorus of 0.06 - 0.15 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Silicon Silicon of 0.75 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Sulfur Sulfur of 0.035 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire
- Sulfur of 0.04 % normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat

EN 10025-5 Grade S355J0WP normalized or normalized formed (+N) mechanical

Property Temperature Value Condition Related Standards Shape Comment
Elastic modulus - Elastic modulus of 190 - 210 GPa - - - Typical for Steel
Elongation - Elongation of 17.5 % - - - Predicted Value, A200
- - Elongation of 22.6 % - - - Predicted Value, A5
- - Elongation of 23.1 % - - - Predicted Value, A50
- 20 °C Elongation of 14 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 15 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 16 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 16 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 17 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 20 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 22 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
Poisson's ratio - Poisson's ratio of 0.3 [-] - - - Typical for Steel
Tensile strength 20 °C Tensile strength of 470 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 470 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 470 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 470 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 490 - 680 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
- 20 °C Tensile strength of 490 - 630 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
- 20 °C Tensile strength of 510 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 510 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 510 - 680 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Tensile strength of 510 - 630 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
Yield strength - Yield strength of 261.8 MPa - - - Predicted Value, RP1
- - Yield strength of 285.8 MPa - - - Predicted Value, RP1 Transverse
- - Yield strength of 370.2 MPa - - - Predicted Value, RP05
- - Yield strength of 392.1 MPa - - - Predicted Value, RP02
- - Yield strength of 400.2 MPa - - - Predicted Value, RP02 Transverse
- - Yield strength of 497.1 MPa - - - Predicted Value, RP002
- 20 °C Yield strength of 345 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 345 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 355 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 355 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -

Rely on our strong, dependable steel to support your most critical applications.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories