UGICHROM® 4542
UGICHROM® 4542 introduction
UGICHROM® is the result of combining the high efficiency of micro-fissuring chromium plating with the technology of the most advanced stainless steel bars. The UGICHROM® product range is recommended for hydraulic and pneumatic mechanisms.
General properties - choice for performance:
Low friction coefficient.
High resistance to wear.
Increased corrosion resistance.
Micro-fissuring chromium plating guarantees excellent performance under extreme conditions of service.
Improved machinability (up to +20% of productivity).
High mechanical properties.
Accurate geometrical and dimensional properties..
Equivalent material: EN 1.4542, EN X5CrNiCuNb16-4, DIN 1.4542, DIN X5CrNiCuNb16-4, AISI 630
UGICHROM® 4542 general
| Property |
Value |
| Density |
Density of 7.75 g/cm³ |
UGICHROM® 4542 chemical
| Property |
Value |
Comment |
| Carbon |
Carbon of 0.06 |
max. |
| Chromium |
Chromium of 15.0 - 16.5 % |
- |
| Copper |
Copper of 3.0 - 4.0 % |
- |
| Manganese |
Manganese of 1.0 |
max. |
| Molybdenum |
Molybdenum of 0.5 |
max. |
| Nickel |
Nickel of 4.0 - 5.0 % |
- |
| Niobium |
Niobium of 0.45 |
max., min: 5xC |
| Phosphorus |
Phosphorus of 0.03 |
max. |
| Silicon |
Silicon of 0.6000000000000001 |
max. |
| Sulfur |
Sulfur of 0.03 |
max. |
UGICHROM® 4542 electrical
| Property |
- |
- |
| Application areas |
| Corrosion properties |
| Other |
CHARACTERISTICS |
Standard product |
Special product |
| Diameter tolerance |
ISO f7 |
On request |
| Bar length dia. 12 to 19 mm |
2900 mm +200/-0 |
On request |
| Bar length dia. 20 to 125 mm |
6000 mm +/- 500 mm |
On request |
| Roundness |
<1/2 f7 ISO |
- |
| Straightness (to EN 10278) |
<0.5 mm/ml |
Up to 0.2 mm for dia. >30 mm |
| Roughness |
Ra < 0.2 µm |
Up to Ra <0.08 µm |
| Chromium structure |
Microcracked |
- |
| Sizes |
Dia. 12 to 125 mm |
On request |
| Thickness of the chromium dia. 12 to 19.5 mm |
18 µm +/-3 |
Max. 50 µm |
| Thickness of the chromium dia. 20 to 115 mm |
25 µm +/-5 |
Max. 100 µm |
UGICHROM® 4542 mechanical
| Property |
Value |
| Elastic modulus |
Elastic modulus of 197 GPa |
| Tensile strength |
Tensile strength of 930.0 - 1100.0 MPa |
Drive progress and development with our high-performance steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote