SEW 410 Grade G-X2CrNiN18-9 quenched (+Q)
SEW 410 Grade G-X2CrNiN18-9 quenched (+Q) introduction
G-X 2 CrNiN 18 9, for cast parts with increased resistance against intercristalline corrosion, without after-treatment after the welding procedure
Equivalent material: ISO C46, DIN 1.4307, AFNOR Z3CN19-09, BS 304S11, SS 2352, AISI 304L, SAE 304L, JIS SUS304L, EN X2CrNi18-9, EN 1.4307, GOST 03Ch18N11, GB 00Cr19Ni10, ASTM TP304L, UNS S30403, IS X02Cr18Ni11
SEW 410 Grade G-X2CrNiN18-9 quenched (+Q) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.9 g/cm³ |
SEW 410 Grade G-X2CrNiN18-9 quenched (+Q) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.6E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.7E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.7E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.8E-5 1/K |
- |
| Melting point |
- |
Melting point of 1230 - 1480 °C |
Typical for Austenitic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 500 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 15 W/(m·K) |
- |
SEW 410 Grade G-X2CrNiN18-9 quenched (+Q) chemical
| Property |
Value |
| Carbon |
Carbon of 0.03 % |
| Chromium |
Chromium of 17 - 20 % |
| Manganese |
Manganese of 1.5 % |
| Nickel |
Nickel of 8 - 12 % |
| Nitrogen |
Nitrogen of 0.1 - 0.2 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1.5 % |
| Sulfur |
Sulfur of 0.02 % |
SEW 410 Grade G-X2CrNiN18-9 quenched (+Q) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.3E-7 Ω·m |
SEW 410 Grade G-X2CrNiN18-9 quenched (+Q) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 195 GPa |
Typical for Austenitic Stainless Steel |
| Elongation |
20.0 °C |
Elongation of 30 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Austenitic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Austenitic Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 440 - 640 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 205 MPa |
- |
| - |
100.0 °C |
Yield strength Rp0.2 of 135 MPa |
- |
| - |
200.0 °C |
Yield strength Rp0.2 of 105 MPa |
- |
| - |
300.0 °C |
Yield strength Rp0.2 of 87 MPa |
- |
| - |
350.0 °C |
Yield strength Rp0.2 of 80 MPa |
- |
| Yield strength Rp1.0 |
20.0 °C |
Yield strength Rp1.0 of 230 MPa |
- |
Embrace sustainable practices with our eco-friendly steel solutions for a greener future.
-- Our promise
Similar or equivalent steel materials
Get a quote