JIS G4311 Grade SUH4 annealed
Equivalent material: GB/T 8Cr20Si2Ni, BS 443S65, UNI X80CrSiNi20, UNE X80CrSiNi20-02, UNE F.320.B, AISI Silchrome XB, SAE HNV-6, DIN 1.4747, DIN X80CrNiSi20, AFNOR Z80CSN20-02, UNE F.320B, AISI HNV-6, EN 1.4747, UNS S65006
JIS G4311 Grade SUH4 annealed general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.6 - 7.7 g/cm³ |
Typical for Martensitic Stainless Steel |
JIS G4311 Grade SUH4 annealed thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1E-5 - 1.5E-5 1/K |
Typical for Martensitic Stainless Steel |
| Melting point |
- |
Melting point of 1370 - 1530 °C |
Typical for Martensitic Stainless Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 460 J/(kg·K) |
Typical for Martensitic Stainless Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 14 - 31 W/(m·K) |
Typical for Martensitic Stainless Steel |
JIS G4311 Grade SUH4 annealed electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 6E-7 Ω·m |
Typical for Martensitic Stainless Steel |
JIS G4311 Grade SUH4 annealed mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 220 GPa |
Typical for Martensitic Stainless Steel |
| Hardness, Brinell |
23.0 °C |
Hardness, Brinell of 321 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Martensitic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Martensitic Stainless Steel |
We set new standards in steel manufacturing, pushing boundaries to deliver exceptional quality.
-- Our promise
Similar or equivalent steel materials
Get a quote