EN 10250-4 Grade X5CrNiCuNb16-4 precipitation hardened (+P)
EN 10250-4 Grade X5CrNiCuNb16-4 precipitation hardened (+P) introduction
The make X5CrNiCuNb16-4 is comparable to X 5 CrNiCuNb 17 4 acc. to steel-code 1995 resp. acc. to steel-iron list 1994. The precipitation hardening steel is applicated for high strength requirements and concurrent favorable corrosion resistance, e.g. for screws, spindles and rotor disks.
Equivalent material: GB 05Cr17Ni4Cu4Nb, GB S51740, JIS SUSF630, JIS SUS630FB, KS STSF630, ASTM A705Type630, SAE 630, UNS S17400, DIN X5CrNiCuNb17-4, DIN 1.4542, DIN X5CrNiCuNb16-4, AFNOR Z7CNU15-05, AFNOR Z7CNU17-04, BS X5CrNiCuNb16-4, AISI 630, AISI 17-4PH, AISI 630 (17-4PH), SAE 17-4PH, SAE 630 (17-4PH), JIS SUS630, JIS SCS24, EN 1.4542, ISO X5CrNiCuNb16-4, ISO PP20I, ISO 4542-174-00-I, ASTM 17-4PH, ASTM 630, ASTM CB7Cu-1, ASTM S17400, ASTM Grade F Class 1
EN 10250-4 Grade X5CrNiCuNb16-4 precipitation hardened (+P) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.8 g/cm³ |
EN 10250-4 Grade X5CrNiCuNb16-4 precipitation hardened (+P) thermal
| Property |
Temperature |
Value |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.09E-5 1/K |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.11E-5 1/K |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 500 J/(kg·K) |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 16 W/(m·K) |
EN 10250-4 Grade X5CrNiCuNb16-4 precipitation hardened (+P) chemical
| Property |
Value |
| Carbon |
Carbon of 0.07 % |
| Chromium |
Chromium of 15 - 17 % |
| Copper |
Copper of 3 - 5 % |
| Manganese |
Manganese of 1.5 % |
| Molybdenum |
Molybdenum of 0.6 % |
| Nickel |
Nickel of 3 - 5 % |
| Niobium |
Niobium of 0.45 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.7 % |
| Sulfur |
Sulfur of 0.03 % |
EN 10250-4 Grade X5CrNiCuNb16-4 precipitation hardened (+P) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 195 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 185 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 175 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 170 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 8 - 15 % |
- |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 6 - 12 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 930 - 1300 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 930 - 1300 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 720 - 1150 MPa |
- |
Our durable steel materials withstand the test of time and challenging environments.
-- Our promise
Similar or equivalent steel materials
Get a quote