EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT)
EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT) introduction
The austenitic steel X6CrNiCuS18-9-2 is used in solution annealed condition in the form of rods, wire rod and profiles. It is not resistant to intercrystalline corrosion.
Equivalent material: ISO X6CrNiCuS18-9-2, ISO AP27I, ISO 4570-303-31-I, ASTM A959UNSS30331, DIN 1.4570, AISI 303Cu+, SAE 303Cu+, JIS SUS303Cu, EN 1.4570, UNS S30331
EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.9 g/cm³ |
EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.7E-5 - 1.9E-5 1/K |
Typical for Austenitic Stainless Steel |
| Melting point |
- |
Melting point of 1230 - 1480 °C |
Typical for Austenitic Stainless Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 440 J/(kg·K) |
Typical for Austenitic Stainless Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 11 - 21 W/(m·K) |
Typical for Austenitic Stainless Steel |
EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.08 % |
| Chromium |
Chromium of 17 - 19 % |
| Copper |
Copper of 1.4 - 1.8 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 0.6 % |
| Nickel |
Nickel of 8 - 10 % |
| Nitrogen |
Nitrogen of 0.11 % |
| Phosphorus |
Phosphorus of 0.05 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.15 - 0.35 % |
EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT) electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 8.5E-7 Ω·m |
Typical for Austenitic Stainless Steel |
EN 10088-1 Grade X6CrNiCuS18-9-2 solution annealed (+AT) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 194 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 186 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 179 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 172 GPa |
- |
| - |
500.0 °C |
Elastic modulus of 165 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 15 - 35 % |
- |
| Hardness, Brinell |
20.0 °C |
Hardness, Brinell of 215 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Austenitic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Austenitic Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 500 - 1100 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 185 - 400 MPa |
- |
| Yield strength Rp1.0 |
20.0 °C |
Yield strength Rp1.0 of 220 MPa |
- |
Trust our expertise to deliver precision-engineered steel solutions that meet the highest industry standards.
-- Our promise
Similar or equivalent steel materials
Get a quote