EN 10088-1 Grade X2CrTi17 soft annealed (+A)
EN 10088-1 Grade X2CrTi17 soft annealed (+A) introduction
Material X2CrTi17 is comparable to X 1 CrTi 15 nach SEW 400 : 1991-02. This material is a stainless steel with an extremely low carbon content for special applications in household, automotive and electrical industry. It is resistant to intercrystalline corrosion both in delivery and welded condition.
Equivalent material: ISO X2CrTi17, GB 022Cr17Ti, GB 022Cr18Ti, GB 11863, ISO FP17A, ISO 4520-430-70-I, JIS SUS430LX, KS STS430LX, DIN X1CrTi15, DIN 1.4520, EN X1CrTi15, EN 1.4520
EN 10088-1 Grade X2CrTi17 soft annealed (+A) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.7 - 7.73 g/cm³ |
EN 10088-1 Grade X2CrTi17 soft annealed (+A) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
20.0 °C |
Coefficient of thermal expansion of 1.02E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.04E-5 - 1.05E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.08E-5 - 1.09E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.12E-5 - 1.13E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.16E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.19E-5 - 1.2E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.22E-5 1/K |
- |
| Melting point |
- |
Melting point of 1425 - 1530 °C |
Typical for Ferritic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 430 - 439 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 474 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 498 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 517 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 538 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 564 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 598 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 20 - 25.9 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 25.3 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 25.4 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 25.7 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 25.9 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 7.6 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 6.6 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 6.1 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 5.8 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 5.3 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.8 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.1 mm²/s |
- |
EN 10088-1 Grade X2CrTi17 soft annealed (+A) chemical
| Property |
Value |
| Carbon |
Carbon of 0.025 % |
| Chromium |
Chromium of 16 - 18 % |
| Manganese |
Manganese of 0.5 % |
| Nitrogen |
Nitrogen of 0.02 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.5 % |
| Sulfur |
Sulfur of 0.015 % |
| Titanium |
Titanium of 0.3 - 0.6 % |
EN 10088-1 Grade X2CrTi17 soft annealed (+A) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 5.59E-7 - 7E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 6.4E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 7.32E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 8.17E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 8.97E-7 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 9.74E-7 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.05E-6 Ω·m |
EN 10088-1 Grade X2CrTi17 soft annealed (+A) mechanical
| Property |
Temperature |
Value |
| Elastic modulus |
20.0 °C |
Elastic modulus of 217 - 220 GPa |
| - |
100.0 °C |
Elastic modulus of 215 GPa |
| - |
200.0 °C |
Elastic modulus of 188 - 210 GPa |
| - |
300.0 °C |
Elastic modulus of 164 - 205 GPa |
| - |
400.0 °C |
Elastic modulus of 195 GPa |
| Elongation |
20.0 °C |
Elongation of 8 - 24 % |
| Elongation A80 |
20.0 °C |
Elongation A80 of 24 % |
| Elongation A80, transverse |
20.0 °C |
Elongation A80, transverse of 24 % |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 24 % |
| Hardness, Brinell |
20.0 °C |
Hardness, Brinell of 200 [-] |
| Poisson's ratio |
20.0 °C |
Poisson's ratio of 0.29 [-] |
| Shear modulus |
20.0 °C |
Shear modulus of 84.82 GPa |
| Tensile strength |
20.0 °C |
Tensile strength of 380 - 750 MPa |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 380 - 530 MPa |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 180 - 320 MPa |
| - |
100.0 °C |
Yield strength Rp0.2 of 190 - 195 MPa |
| - |
150.0 °C |
Yield strength Rp0.2 of 180 MPa |
| - |
200.0 °C |
Yield strength Rp0.2 of 170 MPa |
| - |
250.0 °C |
Yield strength Rp0.2 of 160 MPa |
| - |
300.0 °C |
Yield strength Rp0.2 of 155 MPa |
| Yield strength Rp0.2, transverse |
20.0 °C |
Yield strength Rp0.2, transverse of 200 MPa |
Our stringent quality control measures ensure consistent and reliable steel products.
-- Our promise
Similar or equivalent steel materials
Get a quote