EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A)
EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A) introduction
The ferritic steel X2CrMoTi17-1 (special grade, annealed) is well formable. It is used for household appliances and pipes.
Equivalent material: GB 019Cr18MoTi, GB S11862, ISO 4513-436-00-J, ISO FM19A, JIS SUS436L, KS STS436L, ASTM A240Type436, ASTM A480Type436, AISI Type436, AISI 436, ASTM A959UNSS43600, SAE 51436, DIN 1.4513, AISI S43600, SAE 436, SAE S43600, JIS SUS436LTP, JIS SUS436LTB, EN 1.4513, ASTM 436, UNS S43600
EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.7 g/cm³ |
EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.1E-5 1/K |
- |
| Melting point |
- |
Melting point of 1425 - 1530 °C |
Typical for Ferritic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 460 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 25 W/(m·K) |
- |
EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A) chemical
| Property |
Value |
| Carbon |
Carbon of 0.025 % |
| Chromium |
Chromium of 16 - 18 % |
| Manganese |
Manganese of 1 % |
| Molybdenum |
Molybdenum of 0.8 - 1.4 % |
| Nitrogen |
Nitrogen of 0.02 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.015 % |
| Titanium |
Titanium of 0.3 - 0.6 % |
EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7E-7 Ω·m |
EN 10088-1 Grade X2CrMoTi17-1 soft annealed (+A) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 220 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 215 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 210 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 205 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 195 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 23 % |
- |
| Elongation A80 |
20.0 °C |
Elongation A80 of 23 % |
- |
| Elongation A80, transverse |
20.0 °C |
Elongation A80, transverse of 23 % |
- |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 23 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Ferritic Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Ferritic Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 400 - 550 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 400 - 550 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 200 MPa |
- |
| Yield strength Rp0.2, transverse |
20.0 °C |
Yield strength Rp0.2, transverse of 220 MPa |
- |
We set new standards in steel manufacturing, pushing boundaries to deliver exceptional quality.
-- Our promise
Similar or equivalent steel materials
Get a quote