EN 10025-5 Grade S235J0W normalized or normalized formed (+N)
  • Home
  • Material
  • EN 10025-5 Grade S235J0W normalized or normalized formed (+N)

EN 10025-5 Grade S235J0W normalized or normalized formed (+N)

EN 10025-5 Grade S235J0W normalized or normalized formed (+N) introduction

The weather resistant steel S235JOW with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 235 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding.
The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated.
Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge.
With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible.
The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Equivalent material: GB Q235NH, GB L52350, IS S235WC, DIN 1.8958, EN 1.8958, DIN S235J0W, AFNOR E24W-3, BS WR40B

EN 10025-5 Grade S235J0W normalized or normalized formed (+N) general

Property Value Comment
Density Density of 7.8 g/cm³ Typical for Steel

EN 10025-5 Grade S235J0W normalized or normalized formed (+N) chemical

Property Value Condition Related Standards Shape
Carbon Carbon of 0.13 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Chromium Chromium of 0.4 - 0.8 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Copper Copper of 0.25 - 0.55 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Manganese Manganese of 0.2 - 0.8 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Nickel Nickel of 0.65 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Nitrogen Nitrogen of 0.009 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Phosphorus Phosphorus of 0.035 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire
- Phosphorus of 0.04 % normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat
Silicon Silicon of 0.4 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar
Sulfur Sulfur of 0.035 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire
- Sulfur of 0.04 % normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat

EN 10025-5 Grade S235J0W normalized or normalized formed (+N) mechanical

Property Temperature Value Condition Related Standards Shape Comment
Elastic modulus - Elastic modulus of 190 - 210 GPa - - - Typical for Steel
Elongation - Elongation of 18.4 % - - - Predicted Value, A200
- - Elongation of 21.7 % - - - Predicted Value, A5
- - Elongation of 24.6 % - - - Predicted Value, A50
- 20 °C Elongation of 17 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 18 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 19 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80 Transverse
- 20 °C Elongation of 19 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 20 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 21 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar A80
- 20 °C Elongation of 22 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 22 % normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Elongation of 23 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 24 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar Transverse
- 20 °C Elongation of 24 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Elongation of 25 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Elongation of 26 % normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
Poisson's ratio - Poisson's ratio of 0.3 [-] - - - Typical for Steel
Tensile strength 20 °C Tensile strength of 340 - 510 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
- 20 °C Tensile strength of 340 - 470 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
- 20 °C Tensile strength of 350 - 510 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 350 - 500 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 350 - 510 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 350 - 500 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 360 - 510 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 360 - 500 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Tensile strength of 360 - 510 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Tensile strength of 360 - 500 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Tensile strength of 360 - 470 MPa normalized or normalized formed (+N) EN 10155, EN 10025-1, EN 10025-5 Bar, Sheet, Strip, Flat -
Yield strength - Yield strength of 258.2 MPa - - - Predicted Value, RP1
- - Yield strength of 285.5 MPa - - - Predicted Value, RP1 Transverse
- - Yield strength of 295.7 MPa - - - Predicted Value, RP05
- - Yield strength of 326.8 MPa - - - Predicted Value, RP02
- - Yield strength of 357.6 MPa - - - Predicted Value, RP02 Transverse
- - Yield strength of 472.4 MPa - - - Predicted Value, RP002
- 20 °C Yield strength of 195 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 195 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire -
- 20 °C Yield strength of 215 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 215 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 225 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 225 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -
- 20 °C Yield strength of 235 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155 Strip, Sheet, Flat, Rod, Wire Transverse
- 20 °C Yield strength of 235 MPa normalized or normalized formed (+N) EN 10025-5, EN 10155, EN 10025-1 Strip, Sheet, Flat, Rod, Wire, Bar -

Partner with us to build a solid foundation for success, backed by our expertise in supplying high-quality steel materials.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories