DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000)
DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000) introduction
The steel is used for rail vehicle engineering acc. to the selected standard DIN 5512-3.
The corresponding properties of EN 10088 shall be taken.
Application examples: skin panels, profiles
Remarks: Compared to 1.4301 the steel offers better evenness and toughness at the same strength. Resistant to intercrystalline corrosion in the delivery and the welded condition.
Equivalent material: DIN 1.4318, JIS SUS301L, EN X2CrNiN18-7, EN 1.4318, ASTM 301LN, UNS S30153
DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 7.9 - 7.92 g/cm³ |
DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | -100.0 °C | Coefficient of thermal expansion of 1.49E-5 1/K | - |
| - | 20.0 °C | Coefficient of thermal expansion of 1.61E-5 1/K | - |
| - | 100.0 °C | Coefficient of thermal expansion of 1.6E-5 - 1.67E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.65E-5 - 1.72E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.7E-5 - 1.77E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.16E-5 - 1.81E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.8E-5 - 1.84E-5 1/K | - |
| - | 600.0 °C | Coefficient of thermal expansion of 1.88E-5 1/K | - |
| - | 700.0 °C | Coefficient of thermal expansion of 1.91E-5 1/K | - |
| - | 800.0 °C | Coefficient of thermal expansion of 1.94E-5 1/K | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | -100.0 °C | Specific heat capacity of 440 J/(kg·K) | - |
| - | 20.0 °C | Specific heat capacity of 472 - 500 J/(kg·K) | - |
| - | 100.0 °C | Specific heat capacity of 487 J/(kg·K) | - |
| - | 200.0 °C | Specific heat capacity of 503 J/(kg·K) | - |
| - | 300.0 °C | Specific heat capacity of 512 J/(kg·K) | - |
| - | 400.0 °C | Specific heat capacity of 520 J/(kg·K) | - |
| - | 500.0 °C | Specific heat capacity of 530 J/(kg·K) | - |
| - | 600.0 °C | Specific heat capacity of 541 J/(kg·K) | - |
| - | 700.0 °C | Specific heat capacity of 551 J/(kg·K) | - |
| - | 800.0 °C | Specific heat capacity of 559 J/(kg·K) | - |
| Thermal conductivity | -100.0 °C | Thermal conductivity of 11.7 W/(m·K) | - |
| - | 20.0 °C | Thermal conductivity of 14.5 - 15 W/(m·K) | - |
| - | 100.0 °C | Thermal conductivity of 16 W/(m·K) | - |
| - | 200.0 °C | Thermal conductivity of 17.6 W/(m·K) | - |
| - | 300.0 °C | Thermal conductivity of 19.1 W/(m·K) | - |
| - | 400.0 °C | Thermal conductivity of 20.4 W/(m·K) | - |
| - | 500.0 °C | Thermal conductivity of 21.9 W/(m·K) | - |
| - | 600.0 °C | Thermal conductivity of 23.3 W/(m·K) | - |
| - | 700.0 °C | Thermal conductivity of 24.7 W/(m·K) | - |
| - | 800.0 °C | Thermal conductivity of 26.1 W/(m·K) | - |
| Thermal diffusivity | -100.0 °C | Thermal diffusivity of 3.7 mm²/s | - |
| - | 20.0 °C | Thermal diffusivity of 3.9 mm²/s | - |
| - | 100.0 °C | Thermal diffusivity of 4.3 mm²/s | - |
| - | 200.0 °C | Thermal diffusivity of 4.3 mm²/s | - |
| - | 300.0 °C | Thermal diffusivity of 4.6 mm²/s | - |
| - | 400.0 °C | Thermal diffusivity of 4.7 mm²/s | - |
| - | 500.0 °C | Thermal diffusivity of 4.9 mm²/s | - |
| - | 600.0 °C | Thermal diffusivity of 5 mm²/s | - |
| - | 700.0 °C | Thermal diffusivity of 5.3 mm²/s | - |
| - | 800.0 °C | Thermal diffusivity of 5.7 mm²/s | - |
DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.03 % |
| Chromium | Chromium of 16.5 - 18.5 % |
| Manganese | Manganese of 2 % |
| Nickel | Nickel of 6 - 8 % |
| Nitrogen | Nitrogen of 0.1 - 0.2 % |
| Phosphorus | Phosphorus of 0.05 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.015 % |
DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | -100.0 °C | Electrical resistivity of 5.86E-7 Ω·m |
| - | 20.0 °C | Electrical resistivity of 6.92E-7 - 7.3E-7 Ω·m |
| - | 100.0 °C | Electrical resistivity of 7.58E-7 Ω·m |
| - | 200.0 °C | Electrical resistivity of 8.36E-7 Ω·m |
| - | 300.0 °C | Electrical resistivity of 9.07E-7 Ω·m |
| - | 400.0 °C | Electrical resistivity of 9.73E-7 Ω·m |
| - | 500.0 °C | Electrical resistivity of 1.02E-6 Ω·m |
| - | 600.0 °C | Electrical resistivity of 1.06E-6 Ω·m |
| - | 700.0 °C | Electrical resistivity of 1.1E-6 Ω·m |
| - | 800.0 °C | Electrical resistivity of 1.13E-6 Ω·m |
DIN 5512-3 Grade X2CrNiN18-7 strain-hardened (+C1000) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | -100.0 °C | Elastic modulus of 206 GPa | - |
| - | 20.0 °C | Elastic modulus of 196 - 200 GPa | - |
| - | 100.0 °C | Elastic modulus of 190 - 194 GPa | - |
| - | 200.0 °C | Elastic modulus of 182 - 186 GPa | - |
| - | 300.0 °C | Elastic modulus of 174 - 179 GPa | - |
| - | 400.0 °C | Elastic modulus of 166 - 172 GPa | - |
| - | 500.0 °C | Elastic modulus of 158 - 165 GPa | - |
| - | 600.0 °C | Elastic modulus of 150 GPa | - |
| - | 700.0 °C | Elastic modulus of 142 GPa | - |
| - | 800.0 °C | Elastic modulus of 134 GPa | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Austenitic Stainless Steel |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Austenitic Stainless Steel |
| Tensile strength | 20.0 °C | Tensile strength of 1000 - 1150 MPa | - |
Our skilled craftsmen ensure meticulous attention to detail for superior steel products.
-- Our promise
Similar or equivalent steel materials
- EN 10028-7 Grade X2CrNiN18-7 solution annealed (+AT)
- SEW 400 Grade X2CrNiN18-7 quenched (+Q)
- EN 10216-5 Grade X2CrNiMoSi18-5-3 solution annealed (+AT)
- JIS G4304 Grade SUS301L solution treated
- JIS G4305 Grade SUS301L solution treated
- EN 10088-1 Grade X2CrNiN18-7 strain-hardened (+C1000)
- ASTM A240 Grade 301LN Heat-Treated
- JIS G4305 Grade SUS301L thermal refining rolled
- AISI 301LN 1/8-Hard
- AISI 301LN 1/16-Hard
Get a quote