DIN 17223-1 Grade 1.0500 patented cold drawn
DIN 17223-1 Grade 1.0500 patented cold drawn introduction
The patented cold drawn steel wire type A made of unalloyed steel is used for coil springs (tension springs, compression springs, torsion springs), spring rings and other springs for low static load or rare dynamic load.
Equivalent material: DIN SL, JIS SWO-A, EN 1.0500
DIN 17223-1 Grade 1.0500 patented cold drawn general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for High Carbon Steel |
DIN 17223-1 Grade 1.0500 patented cold drawn thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.32E-5 1/K |
Typical for High Carbon Steel |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
- |
Melting point of 1289 - 1478 °C |
Typical for High Carbon Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 486 J/(kg·K) |
Typical for High Carbon Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 36 W/(m·K) |
Typical for High Carbon Steel |
DIN 17223-1 Grade 1.0500 patented cold drawn chemical
| Property |
Value |
| Carbon |
Carbon of 0.4 - 0.85 % |
| Copper |
Copper of 0.2 % |
| Manganese |
Manganese of 0.3 - 1 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.35 % |
| Sulfur |
Sulfur of 0.04 % |
DIN 17223-1 Grade 1.0500 patented cold drawn electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m |
Typical for Carbon Steel |
DIN 17223-1 Grade 1.0500 patented cold drawn mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 206 GPa |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for High Carbon Steel |
| Reduction of area |
20.0 °C |
Reduction of area of 30 - 40 % |
- |
| Shear modulus |
20.0 °C |
Shear modulus of 81.5 GPa |
- |
| Tensile strength |
20.0 °C |
Tensile strength of 1060 - 1970 MPa |
- |
Optimize your operations and streamline productivity with our efficient steel solutions.
-- Our promise
Similar or equivalent steel materials
Get a quote