DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched
  • Home
  • Material
  • DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched introduction

The steel X 6 CrNiTi 18 10 is well suited for cold-forming, however, one must be aware of the increased cold strain hardening compared to carbon steels. Cold-forming is not as good as with steel X 5 CrNi 18 12. The steel is used in chemical eqiupment construction, the fat- and soap industries for stainless steel screws, nuts and cold-extruded parts. It is used for corrosive damage from water, atmosphere and oxidizing acids of higher concentration and higher temperatures. Temperature of use: up to 550 degrees C (avoid the influence of substances causing intergranular corrosion).

Equivalent material: GB 0Cr18Ni11Ti, CSN 17247, AFNOR Z6CNT18-10, BS 321S12, GOST 12Ch18N10T, ISO D26, UNI X6CrNiTi18-11, JIS SUS321, PN 0H18N10T, SS 2337, UNE F.3523-X6CrNiTi18-11, ASTM 321, DIN 1.4541, DIN X10CrNiMoTi18-10, BS 321S51, UNI X6CrNiTi1811, UNE F.3553, UNE F.3523, AISI 321, SAE 321, JIS SUS321TPY, JIS SUS321TP, JIS SUS321TF, JIS SUS321TB, EN X6CrNiTi18-10, EN 1.4541, GOST 06Ch18N10T, GOST 08X18H10T, GOST 12X18H10T, UNS S32100, IS X04Cr18Ni10Ti

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched general

Property Temperature Value
Density 20.0 °C Density of 7.93 g/cm³

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched thermal

Property Temperature Value Comment
Coefficient of thermal expansion -100.0 °C Coefficient of thermal expansion of 1.49E-5 1/K -
- 20.0 °C Coefficient of thermal expansion of 1.61E-5 1/K -
- 100.0 °C Coefficient of thermal expansion of 1.6E-5 - 1.67E-5 1/K -
- 200.0 °C Coefficient of thermal expansion of 1.7E-5 - 1.75E-5 1/K -
- 300.0 °C Coefficient of thermal expansion of 1.7E-5 - 1.77E-5 1/K -
- 400.0 °C Coefficient of thermal expansion of 1.8E-5 - 1.85E-5 1/K -
- 500.0 °C Coefficient of thermal expansion of 1.8E-5 - 1.85E-5 1/K -
- 600.0 °C Coefficient of thermal expansion of 1.88E-5 1/K -
- 700.0 °C Coefficient of thermal expansion of 1.91E-5 1/K -
- 800.0 °C Coefficient of thermal expansion of 1.94E-5 1/K -
- 900.0 °C Coefficient of thermal expansion of 1.97E-5 1/K -
- 1000.0 °C Coefficient of thermal expansion of 2E-5 1/K -
Max service temperature, long - Max service temperature, long of 0 - 550 °C -
Melting point - Melting point of 1230 - 1480 °C Typical for Austenitic Stainless Steel
Specific heat capacity -100.0 °C Specific heat capacity of 440 J/(kg·K) -
- 20.0 °C Specific heat capacity of 472 J/(kg·K) -
- 100.0 °C Specific heat capacity of 487 J/(kg·K) -
- 200.0 °C Specific heat capacity of 503 J/(kg·K) -
- 300.0 °C Specific heat capacity of 512 J/(kg·K) -
- 400.0 °C Specific heat capacity of 520 J/(kg·K) -
- 500.0 °C Specific heat capacity of 530 J/(kg·K) -
- 600.0 °C Specific heat capacity of 541 J/(kg·K) -
- 700.0 °C Specific heat capacity of 551 J/(kg·K) -
- 800.0 °C Specific heat capacity of 559 J/(kg·K) -
- 900.0 °C Specific heat capacity of 565 J/(kg·K) -
- 1000.0 °C Specific heat capacity of 571 J/(kg·K) -
Thermal conductivity 20.0 °C Thermal conductivity of 14.3 W/(m·K) -
- 100.0 °C Thermal conductivity of 15.8 W/(m·K) -
- 200.0 °C Thermal conductivity of 17.5 W/(m·K) -
- 300.0 °C Thermal conductivity of 19 W/(m·K) -
- 400.0 °C Thermal conductivity of 20.5 W/(m·K) -
- 500.0 °C Thermal conductivity of 21.9 W/(m·K) -
- 600.0 °C Thermal conductivity of 23.3 W/(m·K) -
- 700.0 °C Thermal conductivity of 24.6 W/(m·K) -
- 800.0 °C Thermal conductivity of 26 W/(m·K) -
- 900.0 °C Thermal conductivity of 27.4 W/(m·K) -
- 1000.0 °C Thermal conductivity of 28.8 W/(m·K) -
Thermal diffusivity 20.0 °C Thermal diffusivity of 3.8 mm²/s -
- 100.0 °C Thermal diffusivity of 4 mm²/s -
- 200.0 °C Thermal diffusivity of 4.2 mm²/s -
- 300.0 °C Thermal diffusivity of 4.6 mm²/s -
- 400.0 °C Thermal diffusivity of 4.8 mm²/s -
- 500.0 °C Thermal diffusivity of 4.9 mm²/s -
- 600.0 °C Thermal diffusivity of 5 mm²/s -
- 700.0 °C Thermal diffusivity of 5.3 mm²/s -
- 800.0 °C Thermal diffusivity of 5.6 mm²/s -
- 900.0 °C Thermal diffusivity of 5.9 mm²/s -
- 1000.0 °C Thermal diffusivity of 6 mm²/s -

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched chemical

Property Value
Carbon Carbon of 0.08 %
Chromium Chromium of 17 - 19 %
Manganese Manganese of 2 %
Nickel Nickel of 9 - 12 %
Phosphorus Phosphorus of 0.05 %
Silicon Silicon of 1 %
Sulfur Sulfur of 0.03 %

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched electrical

Property Temperature Value
Electrical resistivity 20.0 °C Electrical resistivity of 7.1E-7 Ω·m
- 100.0 °C Electrical resistivity of 7.76E-7 Ω·m
- 200.0 °C Electrical resistivity of 8.49E-7 Ω·m
- 300.0 °C Electrical resistivity of 9.14E-7 Ω·m
- 400.0 °C Electrical resistivity of 9.71E-7 Ω·m
- 500.0 °C Electrical resistivity of 1.02E-6 Ω·m
- 600.0 °C Electrical resistivity of 1.07E-6 Ω·m
- 700.0 °C Electrical resistivity of 1.1E-6 Ω·m
- 800.0 °C Electrical resistivity of 1.14E-6 Ω·m
- 900.0 °C Electrical resistivity of 1.17E-6 Ω·m
- 1000.0 °C Electrical resistivity of 1.19E-6 Ω·m

DIN 1654-5 Grade X6CrNiTi18-10 cold drawn and quenched mechanical

Property Temperature Value
Elastic modulus -100.0 °C Elastic modulus of 206 GPa
- 20.0 °C Elastic modulus of 196 - 199.26 GPa
- 95.0 °C Elastic modulus of 193.05 GPa
- 100.0 °C Elastic modulus of 190 - 194 GPa
- 150.0 °C Elastic modulus of 188.23 GPa
- 200.0 °C Elastic modulus of 182 - 186 GPa
- 205.0 °C Elastic modulus of 182.71 GPa
- 260.0 °C Elastic modulus of 177.88 GPa
- 300.0 °C Elastic modulus of 174 - 179 GPa
- 315.0 °C Elastic modulus of 174.44 GPa
- 370.0 °C Elastic modulus of 168.92 GPa
- 400.0 °C Elastic modulus of 166 - 172 GPa
- 425.0 °C Elastic modulus of 164.1 GPa
- 485.0 °C Elastic modulus of 159.96 GPa
- 500.0 °C Elastic modulus of 158 - 165 GPa
- 540.0 °C Elastic modulus of 155.13 GPa
- 595.0 °C Elastic modulus of 151 GPa
- 600.0 °C Elastic modulus of 150 GPa
- 650.0 °C Elastic modulus of 146.17 GPa
- 700.0 °C Elastic modulus of 142 GPa
- 705.0 °C Elastic modulus of 140.65 GPa
- 760.0 °C Elastic modulus of 135.83 GPa
- 800.0 °C Elastic modulus of 134 GPa
- 815.0 °C Elastic modulus of 131.69 GPa
- 900.0 °C Elastic modulus of 127 GPa
- 1000.0 °C Elastic modulus of 120 GPa
Poisson's ratio 20.0 °C Poisson's ratio of 0.29 [-]
- 95.0 °C Poisson's ratio of 0.3 [-]
- 150.0 °C Poisson's ratio of 0.29 [-]
- 205.0 °C Poisson's ratio of 0.29 [-]
- 260.0 °C Poisson's ratio of 0.3 [-]
- 315.0 °C Poisson's ratio of 0.3 [-]
- 370.0 °C Poisson's ratio of 0.3 [-]
- 425.0 °C Poisson's ratio of 0.31 [-]
- 485.0 °C Poisson's ratio of 0.32 [-]
- 540.0 °C Poisson's ratio of 0.32 [-]
- 595.0 °C Poisson's ratio of 0.34 [-]
- 650.0 °C Poisson's ratio of 0.34 [-]
- 705.0 °C Poisson's ratio of 0.33 [-]
- 760.0 °C Poisson's ratio of 0.33 [-]
- 815.0 °C Poisson's ratio of 0.35 [-]
Reduction of area 20.0 °C Reduction of area of 55 %
Shear modulus 20.0 °C Shear modulus of 77.22 GPa
- 95.0 °C Shear modulus of 74.46 GPa
- 150.0 °C Shear modulus of 73.08 GPa
- 205.0 °C Shear modulus of 71.02 GPa
- 260.0 °C Shear modulus of 68.26 GPa
- 315.0 °C Shear modulus of 66.88 GPa
- 370.0 °C Shear modulus of 64.81 GPa
- 425.0 °C Shear modulus of 62.74 GPa
- 485.0 °C Shear modulus of 60.67 GPa
- 540.0 °C Shear modulus of 58.61 GPa
- 595.0 °C Shear modulus of 56.54 GPa
- 650.0 °C Shear modulus of 54.47 GPa
- 705.0 °C Shear modulus of 53.09 GPa
- 760.0 °C Shear modulus of 51.02 GPa
- 815.0 °C Shear modulus of 48.95 GPa
Tensile strength 20.0 °C Tensile strength of 680 MPa

We're committed to delivering superior quality and raising the bar in the steel industry.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories