DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q)
DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q) introduction
X 2 CrNiMoN 17 13 3 is a fully austenitic steel that is well suited for cold-forming and can undergo high-gloss polishing. Due to the added nitrogen alloy it possesses a higher strength and the molybdenium additive causes increased resistance especially to non-oxidizing acids and substances containing halogen. Higher resistance to selective attacks and an extraordinary endurance limit performance even under chemical stress. Good low temperature toughness which makes the steel suitable for temperatures to -270 degrees C the refrigeration industry. It is used for stainless steel screws, nuts and molded parts.
Equivalent material: GB 00Cr17Ni13Mo2N, AFNOR Z2CND17-13Az, BS 316S29, UNI X2CrNiMo17-13, JIS SUS316LN, SS 2375, ASTM 316LN, DIN 1.4429, AFNOR Z7CND18-12-03, BS 316S63, UNI X2CrNiMoN1713, AISI 316LN, SAE 316LN, JIS SUSF316LN, EN X2CrNiMoN17-13-3, EN 1.4429, ASTM S31654, UNS S31654
DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 8.01 g/cm³ |
DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | -100.0 °C | Coefficient of thermal expansion of 1.49E-5 1/K | - |
| - | 20.0 °C | Coefficient of thermal expansion of 1.61E-5 1/K | - |
| - | 100.0 °C | Coefficient of thermal expansion of 1.65E-5 - 1.67E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.72E-5 - 1.75E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.75E-5 - 1.77E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.81E-5 - 1.85E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.84E-5 - 1.85E-5 1/K | - |
| - | 600.0 °C | Coefficient of thermal expansion of 1.88E-5 1/K | - |
| - | 700.0 °C | Coefficient of thermal expansion of 1.91E-5 1/K | - |
| - | 800.0 °C | Coefficient of thermal expansion of 1.94E-5 1/K | - |
| - | 900.0 °C | Coefficient of thermal expansion of 1.97E-5 1/K | - |
| - | 1000.0 °C | Coefficient of thermal expansion of 2E-5 1/K | - |
| Max service temperature, long | - | Max service temperature, long of -270 - 0 °C | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | -100.0 °C | Specific heat capacity of 440 J/(kg·K) | - |
| - | 20.0 °C | Specific heat capacity of 472 J/(kg·K) | - |
| - | 100.0 °C | Specific heat capacity of 487 J/(kg·K) | - |
| - | 200.0 °C | Specific heat capacity of 503 J/(kg·K) | - |
| - | 300.0 °C | Specific heat capacity of 512 J/(kg·K) | - |
| - | 400.0 °C | Specific heat capacity of 520 J/(kg·K) | - |
| - | 500.0 °C | Specific heat capacity of 530 J/(kg·K) | - |
| - | 600.0 °C | Specific heat capacity of 541 J/(kg·K) | - |
| - | 700.0 °C | Specific heat capacity of 551 J/(kg·K) | - |
| - | 800.0 °C | Specific heat capacity of 559 J/(kg·K) | - |
| - | 900.0 °C | Specific heat capacity of 565 J/(kg·K) | - |
| - | 1000.0 °C | Specific heat capacity of 571 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 13.5 W/(m·K) | - |
| - | 100.0 °C | Thermal conductivity of 14.9 W/(m·K) | - |
| - | 200.0 °C | Thermal conductivity of 16.7 W/(m·K) | - |
| - | 300.0 °C | Thermal conductivity of 18.3 W/(m·K) | - |
| - | 400.0 °C | Thermal conductivity of 19.8 W/(m·K) | - |
| - | 500.0 °C | Thermal conductivity of 21.3 W/(m·K) | - |
| - | 600.0 °C | Thermal conductivity of 22.7 W/(m·K) | - |
| - | 700.0 °C | Thermal conductivity of 24.2 W/(m·K) | - |
| - | 800.0 °C | Thermal conductivity of 25.6 W/(m·K) | - |
| Thermal diffusivity | 20.0 °C | Thermal diffusivity of 3.6 mm²/s | - |
| - | 100.0 °C | Thermal diffusivity of 3.7 mm²/s | - |
| - | 200.0 °C | Thermal diffusivity of 4 mm²/s | - |
| - | 300.0 °C | Thermal diffusivity of 4.4 mm²/s | - |
| - | 400.0 °C | Thermal diffusivity of 4.6 mm²/s | - |
| - | 500.0 °C | Thermal diffusivity of 4.7 mm²/s | - |
| - | 600.0 °C | Thermal diffusivity of 4.9 mm²/s | - |
| - | 700.0 °C | Thermal diffusivity of 5.2 mm²/s | - |
| - | 800.0 °C | Thermal diffusivity of 5.5 mm²/s | - |
DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.03 % |
| Chromium | Chromium of 16.5 - 18.5 % |
| Manganese | Manganese of 2 % |
| Molybdenum | Molybdenum of 2.5 - 3 % |
| Nickel | Nickel of 12 - 14.5 % |
| Phosphorus | Phosphorus of 0.05 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.025 % |
DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | 20.0 °C | Electrical resistivity of 7.75E-7 Ω·m |
| - | 100.0 °C | Electrical resistivity of 8.42E-7 Ω·m |
| - | 200.0 °C | Electrical resistivity of 9.04E-7 Ω·m |
| - | 300.0 °C | Electrical resistivity of 9.62E-7 Ω·m |
| - | 400.0 °C | Electrical resistivity of 1.01E-6 Ω·m |
| - | 500.0 °C | Electrical resistivity of 1.06E-6 Ω·m |
| - | 600.0 °C | Electrical resistivity of 1.1E-6 Ω·m |
| - | 700.0 °C | Electrical resistivity of 1.13E-6 Ω·m |
| - | 800.0 °C | Electrical resistivity of 1.16E-6 Ω·m |
DIN 1654-5 Grade X2CrNiMoN17-13-3 quenched (+Q) mechanical
| Property | Temperature | Value |
|---|---|---|
| Elastic modulus | -100.0 °C | Elastic modulus of 206 GPa |
| - | 20.0 °C | Elastic modulus of 196 - 197.57 GPa |
| - | 100.0 °C | Elastic modulus of 190 - 194 GPa |
| - | 200.0 °C | Elastic modulus of 182 - 186 GPa |
| - | 300.0 °C | Elastic modulus of 174 - 179 GPa |
| - | 400.0 °C | Elastic modulus of 166 - 172 GPa |
| - | 500.0 °C | Elastic modulus of 158 - 165 GPa |
| - | 600.0 °C | Elastic modulus of 150 GPa |
| - | 700.0 °C | Elastic modulus of 142 GPa |
| - | 800.0 °C | Elastic modulus of 134 GPa |
| Elongation | 20.0 °C | Elongation of 40 % |
| Poisson's ratio | 20.0 °C | Poisson's ratio of 0.28 [-] |
| Reduction of area | 20.0 °C | Reduction of area of 55 % |
| Shear modulus | 20.0 °C | Shear modulus of 77.3 GPa |
| Tensile strength | 20.0 °C | Tensile strength of 580 - 800 MPa |
| Yield strength | 20.0 °C | Yield strength of 295 MPa |
| Yield strength Rp0.2 | 50.0 °C | Yield strength Rp0.2 of 265 MPa |
| - | 100.0 °C | Yield strength Rp0.2 of 225 MPa |
| - | 150.0 °C | Yield strength Rp0.2 of 197 MPa |
| - | 200.0 °C | Yield strength Rp0.2 of 178 MPa |
| - | 250.0 °C | Yield strength Rp0.2 of 165 MPa |
| - | 300.0 °C | Yield strength Rp0.2 of 155 MPa |
| Yield strength Rp1.0 | 50.0 °C | Yield strength Rp1.0 of 300 MPa |
| - | 100.0 °C | Yield strength Rp1.0 of 260 MPa |
| - | 150.0 °C | Yield strength Rp1.0 of 227 MPa |
| - | 200.0 °C | Yield strength Rp1.0 of 208 MPa |
| - | 250.0 °C | Yield strength Rp1.0 of 195 MPa |
| - | 300.0 °C | Yield strength Rp1.0 of 185 MPa |
Simplify your procurement process with our comprehensive range of steel products.
-- Our promise
Similar or equivalent steel materials
- EN 10088-1 Grade X2CrNiMoN17-13-3 solution annealed (+AT)
- DIN 17440 Grade X2CrNiMoN17-13-3 solution heat-treated and quenched
- EN 10088-1 Grade X2CrNiMoN17-11-2 solution annealed (+AT)
- DIN 17440 Grade X2CrNiMoN17-13-3 quenched (+Q)
- EN 10028-7 Grade X2CrNiMoN17-13-3 solution annealed (+AT)
- EN 10272 Grade X2CrNiMoN17-11-2 solution annealed (+AT)
- EN 10272 Grade X2CrNiMoN17-13-3 solution annealed (+AT)
- EN 10028-7 Grade X2CrNiMoN17-11-2 solution annealed (+AT)
- DIN 17440 Grade X2CrNiMoN17-11-2 quenched (+Q)
- EN 10216-5 Grade X2CrNiMoN17-13-3 solution annealed (+AT)
Get a quote