DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC)
DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC) introduction
The steel X10Cr13 is well suited for cold-forming in the annealed condition. The strain hardening inclination is significantly lower than that of stainless austenitic steels and is about equal to that of a carbon steel. It is used for construction parts operating in water and steam, and for mild media in the food industry, predominantly in the tempered condition (screws and molded parts). Temperature of use: up to 550 degrees C.
Equivalent material: GB 1Cr12, CSN 17021, AFNOR Z12C13, BS 410S21, GOST 12Ch13, ISO D10, UNI X12Cr13, JIS SUS410, PN 1H13, SS 2302, UNE F.3401-X12Cr13, ASTM 410, DIN X12Cr13, DIN 1.4006, DIN GX10Cr13, AFNOR Z10C13, AFNOR Z13C13, AFNOR Z6C13, UNE F.3401, AISI 410, SAE 410, JIS SUS410TKA, JIS SUS410TKC, EN X12Cr13, EN 1.4006, ISO X10Cr13, ISO C1, ASTM MT410, ASTM TP410, ASTM Grade CPCA15, UNS S41000
DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.73 g/cm³ |
DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
20.0 °C |
Coefficient of thermal expansion of 1.02E-5 1/K |
- |
| - |
100.0 °C |
Coefficient of thermal expansion of 1.05E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.09E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.13E-5 1/K |
- |
| - |
400.0 °C |
Coefficient of thermal expansion of 1.16E-5 1/K |
- |
| - |
500.0 °C |
Coefficient of thermal expansion of 1.2E-5 1/K |
- |
| - |
600.0 °C |
Coefficient of thermal expansion of 1.22E-5 1/K |
- |
| Max service temperature, long |
- |
Max service temperature, long of 0 - 550 °C |
- |
| Melting point |
- |
Melting point of 1370 - 1530 °C |
Typical for Martensitic Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 439 J/(kg·K) |
- |
| - |
100.0 °C |
Specific heat capacity of 474 J/(kg·K) |
- |
| - |
200.0 °C |
Specific heat capacity of 498 J/(kg·K) |
- |
| - |
300.0 °C |
Specific heat capacity of 517 J/(kg·K) |
- |
| - |
400.0 °C |
Specific heat capacity of 538 J/(kg·K) |
- |
| - |
500.0 °C |
Specific heat capacity of 564 J/(kg·K) |
- |
| - |
600.0 °C |
Specific heat capacity of 598 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 25.9 W/(m·K) |
- |
| - |
100.0 °C |
Thermal conductivity of 25.3 W/(m·K) |
- |
| - |
200.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| - |
300.0 °C |
Thermal conductivity of 25.2 W/(m·K) |
- |
| - |
400.0 °C |
Thermal conductivity of 25.4 W/(m·K) |
- |
| - |
500.0 °C |
Thermal conductivity of 25.7 W/(m·K) |
- |
| - |
600.0 °C |
Thermal conductivity of 25.9 W/(m·K) |
- |
| Thermal diffusivity |
20.0 °C |
Thermal diffusivity of 7.6 mm²/s |
- |
| - |
100.0 °C |
Thermal diffusivity of 6.6 mm²/s |
- |
| - |
200.0 °C |
Thermal diffusivity of 6.1 mm²/s |
- |
| - |
300.0 °C |
Thermal diffusivity of 5.8 mm²/s |
- |
| - |
400.0 °C |
Thermal diffusivity of 5.3 mm²/s |
- |
| - |
500.0 °C |
Thermal diffusivity of 4.8 mm²/s |
- |
| - |
600.0 °C |
Thermal diffusivity of 4.1 mm²/s |
- |
DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC) chemical
| Property |
Value |
| Carbon |
Carbon of 0.08 - 0.12 % |
| Chromium |
Chromium of 12 - 14 % |
| Phosphorus |
Phosphorus of 0.05 % |
| Silicon |
Silicon of 1 % |
| Sulfur |
Sulfur of 0.03 % |
DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 5.59E-7 Ω·m |
| - |
100.0 °C |
Electrical resistivity of 6.4E-7 Ω·m |
| - |
200.0 °C |
Electrical resistivity of 7.32E-7 Ω·m |
| - |
300.0 °C |
Electrical resistivity of 8.17E-7 Ω·m |
| - |
400.0 °C |
Electrical resistivity of 8.97E-7 Ω·m |
| - |
500.0 °C |
Electrical resistivity of 9.74E-7 Ω·m |
| - |
600.0 °C |
Electrical resistivity of 1.05E-6 Ω·m |
DIN 1654-5 Grade X10Cr13 annealed to achieve spheroidized carbides (+AC) mechanical
| Property |
Temperature |
Value |
| Elastic modulus |
20.0 °C |
Elastic modulus of 217 - 217.99 GPa |
| - |
100.0 °C |
Elastic modulus of 213.2 - 215 GPa |
| - |
200.0 °C |
Elastic modulus of 188 - 205.94 GPa |
| - |
300.0 °C |
Elastic modulus of 164 - 198.53 GPa |
| - |
400.0 °C |
Elastic modulus of 188.79 GPa |
| Poisson's ratio |
20.0 °C |
Poisson's ratio of 0.29 [-] |
| - |
100.0 °C |
Poisson's ratio of 0.29 [-] |
| - |
200.0 °C |
Poisson's ratio of 0.29 [-] |
| - |
300.0 °C |
Poisson's ratio of 0.31 [-] |
| - |
400.0 °C |
Poisson's ratio of 0.31 [-] |
| Reduction of area |
20.0 °C |
Reduction of area of 60 % |
| Shear modulus |
20.0 °C |
Shear modulus of 84.82 GPa |
| - |
100.0 °C |
Shear modulus of 82.5 GPa |
| - |
200.0 °C |
Shear modulus of 79.57 GPa |
| - |
300.0 °C |
Shear modulus of 75.86 GPa |
| - |
400.0 °C |
Shear modulus of 72 GPa |
| Tensile strength |
20.0 °C |
Tensile strength of 600 MPa |
Collaborate with us to explore innovative possibilities using our cutting-edge steel technologies.
-- Our promise
Similar or equivalent steel materials
Get a quote