DIN 1652-3 Grade 22CrMoS3-5 cold drawn

DIN 1652-3 Grade 22CrMoS3-5 cold drawn

DIN 1652-3 Grade 22CrMoS3-5 cold drawn introduction

The steel 22 CrMoS 3 5 is used for wear loaded parts in the vehicle and mechanical engineering with medium core strength, better machinability, high toughness and high fatigue strength (e.g. gears, shafts, axles).
The lowest application amounts to -60 °C, the best application up to 60 mm nominal size.

Equivalent material: DIN 1.7333, EN 22CrMoS3-5, EN 1.7333, ASTM G41210, UNS G41210

DIN 1652-3 Grade 22CrMoS3-5 cold drawn general

Property Temperature Value
Density 20.0 °C Density of 7.83 g/cm³

DIN 1652-3 Grade 22CrMoS3-5 cold drawn thermal

Property Temperature Value Comment
Coefficient of thermal expansion -100.0 °C Coefficient of thermal expansion of 1.05E-5 1/K -
- 20.0 °C Coefficient of thermal expansion of 1.15E-5 1/K -
- 100.0 °C Coefficient of thermal expansion of 1.21E-5 1/K -
- 200.0 °C Coefficient of thermal expansion of 1.27E-5 1/K -
- 300.0 °C Coefficient of thermal expansion of 1.32E-5 1/K -
- 400.0 °C Coefficient of thermal expansion of 1.36E-5 1/K -
- 500.0 °C Coefficient of thermal expansion of 1.4E-5 1/K -
- 600.0 °C Coefficient of thermal expansion of 1.44E-5 1/K -
Max service temperature, long - Max service temperature, long of -60 - 0 °C -
Melting point - Melting point of 1382 - 1529 °C Typical for Chromium Molybdenum Steel
Specific heat capacity -100.0 °C Specific heat capacity of 423 J/(kg·K) -
- 20.0 °C Specific heat capacity of 461 J/(kg·K) -
- 100.0 °C Specific heat capacity of 479 J/(kg·K) -
- 200.0 °C Specific heat capacity of 499 J/(kg·K) -
- 300.0 °C Specific heat capacity of 517 J/(kg·K) -
- 400.0 °C Specific heat capacity of 536 J/(kg·K) -
- 500.0 °C Specific heat capacity of 558 J/(kg·K) -
- 600.0 °C Specific heat capacity of 587 J/(kg·K) -
Thermal conductivity 20.0 °C Thermal conductivity of 41 W/(m·K) -
- 100.0 °C Thermal conductivity of 42.7 W/(m·K) -
- 200.0 °C Thermal conductivity of 42.8 W/(m·K) -
- 300.0 °C Thermal conductivity of 41.6 W/(m·K) -
- 400.0 °C Thermal conductivity of 39.9 W/(m·K) -
- 500.0 °C Thermal conductivity of 37.8 W/(m·K) -
- 600.0 °C Thermal conductivity of 35.6 W/(m·K) -
Thermal diffusivity 20.0 °C Thermal diffusivity of 11.4 mm²/s -
- 100.0 °C Thermal diffusivity of 11 mm²/s -
- 200.0 °C Thermal diffusivity of 10.3 mm²/s -
- 300.0 °C Thermal diffusivity of 9.5 mm²/s -
- 400.0 °C Thermal diffusivity of 8.5 mm²/s -
- 500.0 °C Thermal diffusivity of 7.3 mm²/s -
- 600.0 °C Thermal diffusivity of 6 mm²/s -

DIN 1652-3 Grade 22CrMoS3-5 cold drawn chemical

Property Value
Carbon Carbon of 0.19 - 0.24 %
Chromium Chromium of 0.7 - 1 %
Manganese Manganese of 0.7 - 1 %
Molybdenum Molybdenum of 0.4 - 0.5 %
Phosphorus Phosphorus of 0.04 %
Silicon Silicon of 0.4 %
Sulfur Sulfur of 0.02 - 0.035 %

DIN 1652-3 Grade 22CrMoS3-5 cold drawn electrical

Property Temperature Value
Electrical resistivity 20.0 °C Electrical resistivity of 2.54E-7 Ω·m
- 100.0 °C Electrical resistivity of 3E-7 Ω·m
- 200.0 °C Electrical resistivity of 3.69E-7 Ω·m
- 300.0 °C Electrical resistivity of 4.51E-7 Ω·m
- 400.0 °C Electrical resistivity of 5.45E-7 Ω·m
- 500.0 °C Electrical resistivity of 6.54E-7 Ω·m
- 600.0 °C Electrical resistivity of 7.78E-7 Ω·m

DIN 1652-3 Grade 22CrMoS3-5 cold drawn mechanical

Property Temperature Value Comment
Elastic modulus -100.0 °C Elastic modulus of 217 GPa -
- 20.0 °C Elastic modulus of 212 GPa -
- 100.0 °C Elastic modulus of 207 GPa -
- 200.0 °C Elastic modulus of 199 GPa -
- 300.0 °C Elastic modulus of 192 GPa -
- 400.0 °C Elastic modulus of 184 GPa -
- 500.0 °C Elastic modulus of 175 GPa -
- 600.0 °C Elastic modulus of 164 GPa -
Poisson's ratio 23.0 °C Poisson's ratio of 0.29 [-] Typical for Chromium Molybdenum Steel
Tensile strength 20.0 °C Tensile strength of 780 - 850 MPa -

Trust our exceptional steel products to inspire confidence in your projects.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories