DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure
  • Home
  • Material
  • DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure introduction

The steel 20 Cr 4 is used for high wear loaded parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, cylinder).
The lowest application amounts to -25 °C, the best application up to 25 mm nominal size.

Equivalent material: GB 20Cr, ISO 20Cr4, DIN 1.7027, JIS SCr420M, JIS SCr420TK, JIS SCr420HRCH, JIS SCr420RCH, JIS SCr420WCH, JIS SCr22H, JIS SCr420H, JIS SCr420, JIS 20Cr4, EN 20Cr4, EN 1.7027

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure general

Property Temperature Value
Density 20.0 °C Density of 7.83 g/cm³

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure thermal

Property Temperature Value Comment
Coefficient of thermal expansion -100.0 °C Coefficient of thermal expansion of 1.05E-5 1/K -
- 20.0 °C Coefficient of thermal expansion of 1.15E-5 1/K -
- 100.0 °C Coefficient of thermal expansion of 1.21E-5 1/K -
- 200.0 °C Coefficient of thermal expansion of 1.27E-5 1/K -
- 300.0 °C Coefficient of thermal expansion of 1.32E-5 1/K -
- 400.0 °C Coefficient of thermal expansion of 1.36E-5 1/K -
- 500.0 °C Coefficient of thermal expansion of 1.4E-5 1/K -
- 600.0 °C Coefficient of thermal expansion of 1.44E-5 1/K -
Max service temperature, long - Max service temperature, long of -25 - 0 °C -
Melting point - Melting point of 1382 - 1529 °C Typical for Chromium Steel
Specific heat capacity -100.0 °C Specific heat capacity of 423 J/(kg·K) -
- 20.0 °C Specific heat capacity of 461 J/(kg·K) -
- 100.0 °C Specific heat capacity of 479 J/(kg·K) -
- 200.0 °C Specific heat capacity of 499 J/(kg·K) -
- 300.0 °C Specific heat capacity of 517 J/(kg·K) -
- 400.0 °C Specific heat capacity of 536 J/(kg·K) -
- 500.0 °C Specific heat capacity of 558 J/(kg·K) -
- 600.0 °C Specific heat capacity of 587 J/(kg·K) -
Thermal conductivity 20.0 °C Thermal conductivity of 45.1 W/(m·K) -
- 100.0 °C Thermal conductivity of 45.1 W/(m·K) -
- 200.0 °C Thermal conductivity of 44.1 W/(m·K) -
- 300.0 °C Thermal conductivity of 41.9 W/(m·K) -
- 400.0 °C Thermal conductivity of 39.4 W/(m·K) -
- 500.0 °C Thermal conductivity of 36.9 W/(m·K) -
- 600.0 °C Thermal conductivity of 34.4 W/(m·K) -
Thermal diffusivity 20.0 °C Thermal diffusivity of 12.5 mm²/s -
- 100.0 °C Thermal diffusivity of 11.6 mm²/s -
- 200.0 °C Thermal diffusivity of 10.6 mm²/s -
- 300.0 °C Thermal diffusivity of 9.5 mm²/s -
- 400.0 °C Thermal diffusivity of 8.4 mm²/s -
- 500.0 °C Thermal diffusivity of 7.1 mm²/s -
- 600.0 °C Thermal diffusivity of 5.8 mm²/s -

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure chemical

Property Value
Carbon Carbon of 0.17 - 0.23 %
Chromium Chromium of 0.9 - 1.2 %
Manganese Manganese of 0.6 - 0.9 %
Phosphorus Phosphorus of 0.04 %
Silicon Silicon of 0.4 %
Sulfur Sulfur of 0.035 %

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure electrical

Property Temperature Value
Electrical resistivity 20.0 °C Electrical resistivity of 2.31E-7 Ω·m
- 100.0 °C Electrical resistivity of 2.84E-7 Ω·m
- 200.0 °C Electrical resistivity of 3.58E-7 Ω·m
- 300.0 °C Electrical resistivity of 4.48E-7 Ω·m
- 400.0 °C Electrical resistivity of 5.52E-7 Ω·m
- 500.0 °C Electrical resistivity of 6.71E-7 Ω·m
- 600.0 °C Electrical resistivity of 8.06E-7 Ω·m

DIN 1652-3 Grade 20Cr4 cold-drawn or peeled and treated to ferrite-pearlite structure mechanical

Property Temperature Value
Elastic modulus -100.0 °C Elastic modulus of 217 GPa
- 20.0 °C Elastic modulus of 212 GPa
- 100.0 °C Elastic modulus of 207 GPa
- 200.0 °C Elastic modulus of 199 GPa
- 300.0 °C Elastic modulus of 192 GPa
- 400.0 °C Elastic modulus of 184 GPa
- 500.0 °C Elastic modulus of 175 GPa
- 600.0 °C Elastic modulus of 164 GPa
Hardness, Brinell 20.0 °C Hardness, Brinell of 145 - 192 [-]
Poisson's ratio 20.0 °C Poisson's ratio of 0.28 [-]

Join our long list of satisfied customers who trust our legacy of delivering quality steel.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories