Amstrong® 500MC Laser
Amstrong® 500MC Laser introduction
The Amstrong® Laser sheet range comprises hot rolled steel grades developed for applications using computer-controlled thermal and mechanical cutting equipment (laser, plasma etc). The sheets are cut to length from ArcelorMittal coils for laser applications on certified lines that are able to reduce internal stresses and improve flatness before, during and after cutting.
All these grades are designed to:
Give improved productivity, quality and consistency with laser cutting
Meet the most stringent flatness requirements after cutting
Amstrong® Laser sheets are virtually free of internal stresses and can therefore be used to produce sheets with guaranteed flatness before, during and after cutting.
Equivalent material: EN S500MC
Amstrong® 500MC Laser general
| Property |
Value |
Comment |
| Carbon equivalent (CEV) |
Carbon equivalent (CEV) of 0.42 [-] |
max. |
Amstrong® 500MC Laser chemical
| Property |
Value |
Comment |
| Aluminium |
Aluminium of 0.015 % |
min. |
| Carbon |
Carbon of 0.12 % |
max. |
| Manganese |
Manganese of 1.7 % |
max. |
| Niobium |
Niobium of 0.09 % |
max. |
| Phosphorus |
Phosphorus of 0.02 % |
max. |
| Silicon |
Silicon of 0.03 % |
max. |
| Sulfur |
Sulfur of 0.012 % |
max. |
| Titanium |
Titanium of 0.15 % |
max. |
| Vanadium |
Vanadium of 0.2 % |
max. |
Amstrong® 500MC Laser electrical
| Property |
- |
- |
| Application areas |
| Chemical composition |
| Delivery condtion |
| Other |
- |
Laser Classic |
Laser Premium |
Side trimmed* |
- |
| For sheets |
Maximum deviation: the minimum value, depending on the circumstances, between 4 mm/m or 8 mm/2 m or 12 mm/3 m and the special tolerances in EN 10051:2010 |
Maximum deviation: the minimum value, depending on the circumstances, between 3 mm/m or 6 mm/2 m or 9 mm/3 m and the special tolerances in EN 10051:2010 |
Min width |
Max width |
| On cut parts |
Maximum deviation of 5 mm over a length of 1 m |
Maximum deviation of 3 mm over a length of 1 m |
595 |
1640 |
|
Amstrong® 500MC Laser mechanical
| Property |
Temperature |
Value |
Comment |
| Charpy impact energy |
-20 °C |
Charpy impact energy of 40 J |
min. | for thickness 6-16 mm |
| Elongation |
- |
Elongation of 14 % |
min. | for thickness < 2 mm | Transverse, A80 |
| - |
- |
Elongation of 15 % |
min. | for thickness < 2 mm, A80 |
| - |
- |
Elongation of 15 % |
min. | for thickness 2-3 mm | Transverse, A80 |
| - |
- |
Elongation of 16 % |
min. | for thickness 2-3 mm, A80 |
| - |
- |
Elongation of 18 % |
min. A5.65√So | for thickness 3-16 mm | Transverse |
| - |
- |
Elongation of 19 % |
min. A5.65√So | for thickness 3-16 mm |
| Tensile strength |
- |
Tensile strength of 560 - 700 MPa |
for thickness < 16 mm |
| - |
- |
Tensile strength of 570 - 700 MPa |
for thickness < 16 mm | Transverse |
| Yield strength |
- |
Yield strength of 500 - 600 MPa |
for thickness < 16 mm |
| - |
- |
Yield strength of 530 - 630 MPa |
for thickness < 16 mm | Transverse |
Our skilled craftsmen work tirelessly to produce steel products of the highest quality and precision.
-- Our promise
Similar or equivalent steel materials
Get a quote