AISI 1043 Hot Rolled
Equivalent material: DIN 1.0503, DIN GS-C45, DIN C45, AFNOR C45, BS 080M46, UNI C45, SS 1650, UNE F.114, AISI 1045, SAE 1045, SAE 1043, JIS S45C, JIS S45CM, EN C45, EN 2C45, EN 1.0503, ISO C45, ISO CS45, GOST 45, GB 45, GB U20452, GB/T 45, GB/T U20452, ASTM Grade 1045, UNS G10430, UNS G10450, IS C45, DIN 1.0541, DIN D 40-2, DIN C42D, AFNOR C42D, BS C42D, AISI 1042, SAE 1042, JIS SWRH42, JIS SWRH42A, EN C42D, EN 1.0541, ISO C42D, ASTM 1042, ASTM 1043, UNS G10420, DIN 1.1154, DIN C42D2, AFNOR C42D2, BS C42D2, JIS S43C, EN C42D2, EN 1.1154, ISO C42D2, GB C42D2, GB/T C42D2
AISI 1043 Hot Rolled general
| Property |
Temperature |
Value |
| Density |
23.0 °C |
Density of 7.8 g/cm³ |
AISI 1043 Hot Rolled thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.2E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
- |
Melting point of 1380 - 1514 °C |
Typical for Medium Carbon Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 450 J/(kg·K) |
- |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 21 - 52 W/(m·K) |
Typical for Medium Carbon Steel |
AISI 1043 Hot Rolled chemical
| Property |
Value |
| Carbon |
Carbon of 0.4 - 0.47 % |
| Iron |
Iron of 98.4 - 98.9 % |
| Manganese |
Manganese of 0.7 - 1 % |
| Phosphorus |
Phosphorus of 0 - 0.04 % |
| Sulfur |
Sulfur of 0 - 0.05 % |
AISI 1043 Hot Rolled electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m |
Typical for Carbon Steel |
AISI 1043 Hot Rolled mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 210 GPa |
- |
| Elongation |
23.0 °C |
Elongation of 18 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Medium Carbon Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 75 - 80 GPa |
Typical for Carbon Steel |
| Tensile strength |
23.0 °C |
Tensile strength of 660 MPa |
- |
| Yield strength |
23.0 °C |
Yield strength of 360 MPa |
- |
We build trust by delivering exceptional steel solutions for every project we undertake.
-- Our promise
Similar or equivalent steel materials
Get a quote