UGIGRIP® 4571
UGIGRIP® 4571 introduction
In addition to their excellent corrosion resistance which ensures a long service life for structures over several decades, the UGIGRIP® range provides a guarantee of:
Higher mechanical properties than with conventional steel, which allows the use of smaller cross sections or a reduction in reinforcement (meaning weight and labour savings);
Mechanical properties – yield strength and elongation – meeting the requirements of Eurocode 8, class M for earthquake-resistant construction;
A selection of non-magnetic stainless steels for buildings where this property is required: hospitals, banks, airports, meteorological stations, etc.
Mechanical properties at high temperature – tensile and creep – exceeding those of conventional steels, giving improved fire resistance;
A very low thermal conductivity which gives this product exceptional properties for treating thermal bridges.
New ECISS harmonized European standard currently being prepared.
In accordance with European design codes in the construction field, the products of the UGIGRIP® range comply with Eurocode 2 (cf. prEN 1992-1-1 sub-section 4.4.1.2) and Eurocode 3 (cf. prEN 1993-1-4).
Equivalent material: EN 1.4571, AISI 316Ti
UGIGRIP® 4571 general
| Property |
Value |
| Density |
Density of 7.9 g/cm³ |
UGIGRIP® 4571 chemical
| Property |
Value |
Comment |
| Carbon |
Carbon of 0.05 |
max. |
| Chromium |
Chromium of 16.5 - 18.5 % |
- |
| Manganese |
Manganese of 2.0 |
max. |
| Molybdenum |
Molybdenum of 2.0 - 2.5 % |
- |
| Nickel |
Nickel of 10.5 - 11.5 % |
- |
| Phosphorus |
Phosphorus of 0.045 |
max. |
| Silicon |
Silicon of 1.0 |
max. |
| Sulfur |
Sulfur of 0.015 - 0.03 % |
- |
| Titanium |
Titanium of 0.7000000000000001 |
max., min: 5xC |
UGIGRIP® 4571 electrical
| Property |
- |
- |
| Application areas |
| Corrosion properties |
| DUPLEX |
Conventional grades AISI/EN |
| Class XC (carbonation) |
XC |
1.4062 |
304/4301 |
| XD1and XD2 |
1.4062 |
304/4301 |
| XD3 |
1.4362 |
316/4401 |
| XS1 |
1.4362 |
316/4401 |
| XS2 and XS3 |
1.4462 |
- |
| XF1 and XF2 |
1.4362 |
316/4401 |
| XF3 and XF4 |
1.4462 |
- |
| XA1 |
1.4362 |
316/4401 |
| X A2 and XA3 |
1.4462 |
- |
UGIGRIP® 4571 mechanical
| Property |
Value |
Comment |
| Elastic modulus |
Elastic modulus of 193 GPa |
196.0 |
| Elongation |
Elongation of 15 % |
min. |
| Tensile strength |
Tensile strength of 575 MPa |
min. |
Withstand challenging environments and harsh conditions with our durable steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote