UGI® 4114 Drawn Bar
UGI® 4114 Drawn Bar introduction
Resulphurized ferritic stainless steel with molybdenum, with pitting corrosion resistance similar to that of UGIMA®4305 depending on environments and with good machinability and good ferromagnetic properties.
Ferritic supplied in the annealed (softened) condition: micro structure composed of ferrite, chromium carbides and MnS inclusions.
Equivalent material: EN 1.4114, EN X6CrMo19-2, UNS S18200, DIN 1.4114, DIN X6CrMo19-2, ASTM XM-34
UGI® 4114 Drawn Bar general
| Property |
Value |
| Density |
Density of 7.8 g/cm³ |
UGI® 4114 Drawn Bar thermal
| Property |
Value |
Comment |
| Coefficient of thermal expansion |
Coefficient of thermal expansion of 0.0000111 1/K |
20 to 100°C |
| Thermal conductivity |
Thermal conductivity of 15 W/(m·K) |
- |
UGI® 4114 Drawn Bar chemical
| Property |
Value |
Comment |
| Carbon |
Carbon of 0.08 |
max. |
| Chromium |
Chromium of 17.5 - 18.5 % |
- |
| Manganese |
Manganese of 1.0 |
max. |
| Molybdenum |
Molybdenum of 1.5 - 2.5 % |
- |
| Nitrogen |
Nitrogen of 0.07 |
max. |
| Phosphorus |
Phosphorus of 0.04 |
max. |
| Silicon |
Silicon of 1.0 |
max. |
| Sulfur |
Sulfur of 0.15 - 0.25 % |
max. |
UGI® 4114 Drawn Bar magnetic
| Property |
Value |
Comment |
| Coercive force |
Coercive force of 300.0 - 400.0 A/m |
Drawn bar with magnetic annealing and >600 only drawn. |
| Relative magnetic permeability |
Relative magnetic permeability of 900 [-] |
Drawn bar with magnetic annealing and <500 only drawn. |
| - |
Relative magnetic permeability of 1100 [-] |
Drawn bar with magnetic annealing and <500 only drawn. |
| Remanence |
Remanence of 0.8 - 1.0 T |
Drawn bar with magnetic annealing and 0.6-0.8 only drawn. |
| Saturation polarization |
Saturation polarization of 1.57 T |
Drawn bar with magnetic annealing |
UGI® 4114 Drawn Bar electrical
| Property |
Value |
| Electrical resistivity |
Electrical resistivity of 6.100000000000001e-07 Ω·m |
UGI® 4114 Drawn Bar mechanical
| Property |
Value |
Comment |
| Elastic modulus |
Elastic modulus of 220 GPa |
- |
| Elongation |
Elongation of 10 % |
min. |
| Tensile strength |
Tensile strength of 550.0 - 800.0 MPa |
- |
We are dedicated to helping you achieve success through our reliable steel solutions.
-- Our promise
Similar or equivalent steel materials
Get a quote